Download Print this page

Jeep grand cherokee SRT 2015 Owner's Manual

Jeep grand cherokee SRT 2015 Owner's Manual

Hide thumbs Also See for grand cherokee SRT 2015:

Operating information manual (878 pages)

,

Owner's manual (754 pages)

,

User manual (268 pages)

Table of Contents

Advertisement

Quick Links

Download this manual

Grand Cherokee

2 0 1 5

SRT

O W N E R ' S M A N U A L

Table of Contents

Advertisement

Chapters

Table of Contents

Need help?

Need help?

Do you have a question about the grand cherokee SRT 2015 and is the answer not in the manual?

Questions and answers

Summary of Contents for Jeep grand cherokee SRT 2015

Page 1 Grand Cherokee 2 0 1 5 O W N E R ’ S M A N U A L...
Page 2 VEHICLES SOLD IN CANADA This manual illustrates and describes the operation of With respect to any Vehicles Sold in Canada, the name Chrysler Group LLC shall be deemed to be deleted and the features and equipment that are either standard or op- name Chrysler Canada Inc.
Page 3: Introduction
TABLE OF CONTENTS SECTION PAGE INTRODUCTION ............. 3 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE .
Page 5: Table Of Contents
INTRODUCTION CONTENTS INTRODUCTION ......4 VEHICLE IDENTIFICATION NUMBER ..8 ROLLOVER WARNING ....5 VEHICLE MODIFICATIONS/ALTERATIONS .
Page 6: Introduction
4 INTRODUCTION particularly those used for braking, steering, transmis- INTRODUCTION sion, and transfer case shifting. Learn how your vehicle Congratulations on selecting your new Chrysler Group handles on different road surfaces. Your driving skills LLC vehicle. Be assured that it represents precision will improve with experience.
Page 7: Rollover Warning
INTRODUCTION 5 read these publications carefully. Following the instruc- of the higher center of gravity, if this vehicle is out of tions and recommendations in this manual will help control it may roll over when some other vehicles may assure safe and enjoyable operation of your vehicle. not.
Page 8: How To Use This Manual
6 INTRODUCTION two million annually. In a rollover crash, an unbelted person is significantly more likely to die than a person wearing a seat belt. Always buckle up. HOW TO USE THIS MANUAL Consult the Table of Contents to determine which section contains the information you desire.
Page 9 INTRODUCTION 7...
Page 10: Vehicle Identification Number
8 INTRODUCTION vehicle. Save this label for a convenient record of your WARNINGS AND CAUTIONS vehicle identification number and optional equipment. This Owners Manual contains WARNINGS against op- erating procedures that could result in a collision or bodily injury. It also contains CAUTIONS against proce- dures that could result in damage to your vehicle.
Page 11: Vehicle Modifications/Alterations
INTRODUCTION 9 VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death. Right Front Body VIN Location NOTE: It is illegal to remove or alter the VIN.
Page 13 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS A WORD ABOUT YOUR KEYS ... . .13 ▫ To Arm The System ....19 ▫...
Page 14 12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE REMOTE STARTING SYSTEM — IF EQUIPPED . . .27 ▫ Important Safety Precautions ....49 ▫ How To Use Remote Start ....27 ▫...
Page 15: A Word About Your Keys
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 The Keyless Ignition Node (KIN) has four operating A WORD ABOUT YOUR KEYS positions, three of which are labeled and will illuminate Your vehicle uses a keyless ignition system. This system when in position. The three positions are OFF, ACC, and consists of a Key Fob with Remote Keyless Entry (RKE) ON/RUN.
Page 16: Key Fob
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The emergency key is also for locking the glove box. You can keep the emergency key with you when valet parking. To remove the emergency key, slide the mechanical latch at the top of the Key Fob sideways with your thumb and then pull the key out with your other hand.
Page 17: Ignition Or Accessory On Message
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 NOTE: You can insert the double-sided emergency key WARNING! into the lock cylinders with either side up. • When leaving the vehicle, always remove the Key Ignition Or Accessory On Message Fob from the vehicle and lock your vehicle. Opening the driver’s door when the ignition is in ACC or •...
Page 18: Sentry Key
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The system uses a Key Fob with a factory-mated Remote WARNING! (Continued) Keyless Entry (RKE) transmitter, an Ignition Node Mod- • Do not leave children or animals inside parked ule, Keyless Ignition Node (KIN) and a RF receiver to vehicles in hot weather.
Page 19: Replacement Keys
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 Key Fob to try to start the engine. Either of these Replacement Keys conditions will result in the engine being shut off after NOTE: Only Key Fobs that are programmed to the two seconds.
Page 20: Customer Key Programming
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Duplication of Key Fobs may be performed at an autho- • This device must accept any interference that may be rized dealer. This procedure consists of programming a received, including interference that may cause unde- blank Key Fob to the vehicle electronics.
Page 21: Rearming The System
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 NOTE: The Panic and Security alarms are quite different. • For vehicles equipped with Keyless Enter-N-Go™, Please take a moment to activate the Panic and the make sure the vehicle ignition system is OFF. Security modes to hear the differences in the horn.
Page 22: To Disarm The System
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE not disarm the Vehicle Security Alarm. If someone To Disarm The System enters the vehicle through the liftgate and opens any The Vehicle Security Alarm can be disarmed using any of door the alarm will sound. the following methods: •...
Page 23: Tamper Alert
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 NOTE: Tamper Alert If something has triggered the Vehicle Security Alarm in • The front courtesy overhead console and door cour- your absence, the horn will sound three times and the tesy lights will turn on if the dimmer control is in the exterior lights blink three times when you unlock the “Dome ON”...
Page 24: To Unlock The Doors And Liftgate
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Driving at speeds 5 mph (8 km/h) and above To Unlock The Doors And Liftgate disables the system from responding to all RKE transmit- Push and release the UNLOCK button on the RKE ter buttons for all RKE transmitters.
Page 25: To Lock The Doors And Liftgate
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 Flash Lamps With Lock REMOTE STARTING SYSTEM — IF EQUIPPED This feature will cause the turn signal lights to flash when the doors are locked or unlocked with the RKE transmit- This feature allows the Remote Keyless Entry ter.
Page 26: Using The Panic Alarm
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If the vehicle is equipped with Passive Entry, refer to The Panic Alarm will stay on for three minutes unless “Keyless Enter-N-Go™” in “Things To Know Before you turn it off by either pushing the PANIC button a Starting Your Vehicle”...
Page 27: Transmitter Battery Replacement
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 1. Remove the emergency key by sliding the mechanical Transmitter Battery Replacement latch on the back of the RKE transmitter sideways The recommended replacement battery is one CR2032 with your thumb and then pull the key out with your battery.
Page 28: General Information
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE new battery with your fingers. Skin oils may cause battery deterioration. If you touch a battery, clean it with rubbing alcohol. 4. To assemble the RKE transmitter case, snap the two halves together. General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada.
Page 29: Remote Starting System - If Equipped
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 If your RKE transmitter fails to operate from a normal NOTE: distance, check for these two conditions: • The vehicle must be equipped with an automatic 1. A weak battery in the transmitter. The expected life of transmission to be equipped with Remote Start.
Page 30 28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • RKE PANIC button not pressed Remote Start Abort Message On Driver Information Display (DID) — If Equipped • Fuel meets minimum requirement The following messages will display in the DID if the •...
Page 31 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 To Enter Remote Start Mode • For security, power window and power sunroof op- eration (if equipped) are disabled when the vehicle is in the Remote Start mode. Push and release the REMOTE START button on the RKE transmitter twice within five sec- •...
Page 32: Door Locks
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Exit Remote Start Mode And Drive The Vehicle when the remote start is activated. These features will stay on through the duration of remote start or until the Before the end of the 15-minute cycle, press and release ignition switch is turned to the ON/RUN position.
Page 33 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 NOTE: Manually locking the vehicle will not arm the WARNING! Vehicle Security Alarm. • For personal security and safety in the event of a collision, lock the vehicle doors before you drive as well as when you park and leave the vehicle.
Page 34: Power Door Locks
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • Do not leave the Key Fob in or near the vehicle, or in a location accessible to children, and do not leave the ignition of a vehicle equipped with Keyless Enter-N-Go™...
Page 35: Child-Protection Door Lock System - Rear Doors
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 If a rear door is locked, it cannot be opened from inside Child-Protection Door Lock System — Rear the vehicle without first unlocking the door. The door Doors may be unlocked manually by raising the lock knob. To provide a safer environment for small children riding in the rear seats, the rear doors are equipped with Automatic Door Locks —...
Page 36 34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Child-Protection Door Lock Location Child-Protection Door Lock Function WARNING! Avoid trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the Child-Protection locks are engaged (locked).
Page 37: Keyless Enter-N-Go
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 NOTE: For emergency exit from the rear seats when the • If the vehicle is unlocked by Passive Entry and no door Child-Protection Door Lock System is engaged, manually goes ajar within 60 seconds, the vehicle will re-lock raise the door lock knob to the unlocked position, roll and if equipped will arm the security alarm.
Page 38 36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Unlock From The Passenger Side: With a valid Passive Entry RKE transmitter within 5 ft (1.5 m) of the passenger door handle, grab the front passenger door handle to unlock all four doors automati- cally.
Page 39 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 If one of the vehicle doors is open and the door panel NOTE: If the vehicle is unlocked then the liftgate will switch is used to lock the vehicle, once all open doors open with the electronic liftgate release and no RKE have been closed the vehicle checks the inside and Transmitter is required.
Page 40 38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Lock The Liftgate NOTE: The key must be within 5 ft (1.5 m) of the handle being used to lock the vehicle. With a valid Passive Entry RKE transmitter within 3 ft (1.0 m) of the liftgate, press the passive entry lock button located to the right of electronic liftgate release.
Page 41 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 Do NOT grab the door handle, when pushing the door NOTE: handle button. This could unlock the door(s). • After pushing the door handle button, you must wait two seconds before you can lock or unlock the doors, using either Passive Entry door handle.
Page 42: Windows
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WINDOWS Power Windows The power window controls are located on the driver’s door trim panel. There is a single switch on the front passenger door and rear doors which operate the front passenger and rear passenger door windows.
Page 43 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 down automatically. To cancel the “Auto-Down” move- WARNING! ment, operate the switch in either the up or down direction and release the switch. Never leave children unattended in a vehicle, and do not let children play with power windows.
Page 44 42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Auto Up Feature With Anti-Pinch Protection — Driver And Front Passenger Door Only Lift the window switch fully upward to the second detent, release, and the window will go up automatically. To stop the window from going all the way up during the Auto Up operation, push down on the switch briefly.
Page 45 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 NOTE: If the window runs into any obstacle during Resetting The Auto Up Feature Auto Up it will reverse direction and then go back down. Should the Auto Up feature stop working, the window Remove the obstacle and use the window switch again to probably needs to be reset.
Page 46: Wind Buffeting
44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE open or partially open positions. This is a normal occur- rence and can be minimized. If the buffeting occurs with the rear windows open, then open the front and rear windows together to minimize the buffeting. If the buffeting occurs with the sunroof open, adjust the sun- roof opening to minimize the buffeting.
Page 47 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 NOTE: If “Unlock All Doors 1st Press” is programmed in Uconnect® Settings, all doors will unlock when you push the electronic liftgate release. If Unlock Driver Door 1st press is programmed in Uconnect® Settings, the liftgate will unlock when you press the electronic liftgate release.
Page 48: Power Liftgate - If Equipped
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The power liftgate may also be opened or closed by WARNING! pressing the LIFTGATE button located on the front overhead console, or closed by pressing the LIFTGATE Driving with the liftgate open can allow poisonous button located on left rear trim panel, near the liftgate exhaust gases into your vehicle.
Page 49 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 NOTE: NOTE: • In the event of a power malfunction to the liftgate, an • The power liftgate buttons will not operate if the emergency liftgate latch release can be used to open vehicle is in gear or the vehicle speed is above 0 mph the liftgate.
Page 50: Occupant Restraint Systems
48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • The power liftgate must be in the full open position for close. However, vehicle movement may result in a rear liftgate close button on the left rear trim, near the detection of an obstruction. liftgate opening, to operate.
Page 51: Important Safety Precautions
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 • Supplemental Restraint Systems (SRS) Air Bags 3. Children that are not big enough to wear the vehicle seat belt properly (Refer to Child Restraints ) should • Supplemental Active Head Restraints be secured in a vehicle with a rear seat in child •...
Page 52: Seat Belt Systems
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 8. Do not lean against the door or window. If your Seat Belt Systems vehicle has side air bags, and deployment occurs, the Buckle up even though you are an excellent driver, even side air bags will inflate forcefully into the space on short trips.
Page 53 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 switch is in the START or ON/RUN position. If the The outboard front passenger seat BeltAlert® is not driver or outboard front seat passenger is unbelted, active when the outboard front passenger seat is unoc- the Seat Belt Reminder Light will turn on and remain cupied.
Page 54 52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lap/Shoulder Belts WARNING! All seating positions in your vehicle are equipped with • Relying on the air bags alone could lead to more lap/shoulder belts. severe injuries in a collision. The air bags work The seat belt webbing retractor will lock only during very with your seat belt to restrain you properly.
Page 55 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 WARNING! (Continued) WARNING! (Continued) • Do not allow people to ride in any area of your • A lap belt worn too high can increase the risk of vehicle that is not equipped with seats and seat injury in a collision.
Page 56 54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) WARNING! (Continued) • A seat belt that is too loose will not protect you • A shoulder belt placed behind you will not protect properly. In a sudden stop, you could move too far you from injury during a collision.
Page 57 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 2. The seat belt latch plate is above the back of the front 3. When the seat belt is long enough to fit, insert the latch seat, and next to your arm in the rear seat (for vehicles plate into the buckle until you hear a “click.”...
Page 58 56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE plate and pull on the lap belt. A snug seat belt reduces 6. To release the seat belt, push the red button on the the risk of sliding under the seat belt in a collision. buckle.
Page 59 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 4. Continue to slide the latch plate up until it clears the folded webbing and the seat belt is no longer twisted. Adjustable Upper Shoulder Belt Anchorage In the driver and front passenger seats, the top of the shoulder belt can be adjusted upward or downward to position the seat belt away from your neck.
Page 60 58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: The adjustable upper shoulder belt anchorage is WARNING! equipped with an Easy Up feature. This feature allows the shoulder belt anchorage to be adjusted in the upward • ONLY use a Seat Belt Extender if it is physically position without pushing or squeezing the release but- required in order to properly fit the original seat ton.
Page 61 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 Pregnant women should wear the lap part of the seat belt The pretensioners are triggered by the Occupant Re- across the thighs and as snug across the hips as possible. straint Controller (ORC). Like the air bags, the preten- Keep the seat belt low so that it does not come across the sioners are single use items.
Page 62 60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE “Child Restraints” section of this manual. The table If the passenger seating position is equipped with an below defines the type of feature for each seating posi- ALR and is being used for normal usage: tion.
Page 63 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 feature. Children 12 years old and under should always 3. Allow the seat belt to retract. As the seat belt retracts, be properly restrained in a vehicle with a rear seat. you will hear a clicking sound. This indicates the seat belt is now in the Automatic Locking Mode.
Page 64 62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE How The Active Head Restraints (AHR) Work WARNING! (Continued) The Occupant Restraint Controller (ORC) determines • Failure to replace the seat belt assembly could whether the severity, or type of rear impact will require increase the risk of injury in collisions.
Page 65 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 WARNING! All occupants, including the driver, should not oper- ate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of a collision.
Page 66 64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 1. Grasp the deployed AHR from the rear seat. 3. Pull down then rearward towards the rear of the vehicle then down to engage the locking mechanism. Hand Positioning Points On AHR 2.
Page 67 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 AHR In Reset Position Review Table Below NOTE: A — Downward Movement B — Rearward Movement • If you have difficulties or problems resetting the Active C — Final Downward Movement To Engage Locking Mechanism Head Restraints, see an authorized dealer.
Page 68: Supplemental Restraint System (Srs)
66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For safety reasons, have the Active Head Restraints • Supplemental Side Air Bags checked by a qualified specialist at an authorized • Supplemental Knee Air Bags dealer. • Front and Side Impact Sensors Supplemental Restraint System (SRS) •...
Page 69 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 WARNING! • Being too close to the steering wheel or instrument panel during Advanced Front Air Bag deployment could cause serious injury, including death. Air bags need room to inflate. Sit back, comfortably extending your arms to reach the steering wheel or instrument panel.
Page 70 68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Advanced Front Air Bag Features the driver or front passenger seat belt is buckled. The seat belt buckle switch may adjust the inflation rate of the The Advanced Front Air Bag system has multistage Advanced Front Air Bags.
Page 71 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 On the other hand, depending on the type and location of WARNING! (Continued) impact, Advanced Front Air Bags may deploy in crashes • Relying on the air bags alone could lead to more with little vehicle front-end damage but that produce a severe injuries in a collision.
Page 72 70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE way as the air bags inflate to their full size. The Advanced Supplemental Driver Knee Air Bag Front Air Bags fully inflate in less time than it takes to This vehicle is equipped with a Supplemental Driver blink your eyes.
Page 73 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 The inflating SAB deploys through the seat seam into the space between the occupant and the door. The SAB moves at a very high speed and with such a high force that it could injure you if you are not seated properly, or if items are positioned in the area where the SAB inflates.
Page 74 72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE rollover events, in addition to the injury reduction poten- tial provided by the seat belts and body structure. The SABICs deploy downward, covering the side win- dows. An inflating SABIC pushes the outside edge of the trim out of the way and covers the window.
Page 75 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 The SABICs and SABs (“Side Air Bags”) are designed to WARNING! activate in certain side impacts and certain rollover events. The Occupant Restraint Controller (“ORC”) de- • Your vehicle is equipped with left and right termines whether the deployment of the Side Air Bags in Supplemental Side Air Bag Inflatable Curtains a particular side impact or rollover event is appropriate,...
Page 76 74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Seat belts (and child restraints where appropriate) are WARNING! (Continued) necessary for your protection in all collisions. They also • Relying on the Side Air Bags alone could lead to help keep you in position, away from inflating Side Air more severe injuries in a collision.
Page 77 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 deploys the left Side Air Bags only and a right side event may be in progress and whether deployment is impact deploys the right Side Air Bags only. appropriate. A slower-developing event may deploy the seat belt pretensioners on both sides of the vehicle.
Page 78 76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If you do have a collision, which deploys the air bags, any continues, see your doctor. If these particles settle on or all of the following may occur: your clothing, follow the garment manufacturer’s in- structions for cleaning.
Page 79 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 • After any collision, the vehicle should be taken to an System Reset Procedure authorized dealer immediately. In order to reset the Enhanced Accident Response System functions after an event, the ignition switch must be Enhanced Accident Response System changed from ignition START or ON/RUN to ignition In the event of an impact, if the communication network...
Page 80 78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The ORC contains a backup power supply system that free, if any of the following occurs, have an authorized may deploy the air bags even if the battery loses power or dealer service the air bag system immediately. it becomes disconnected prior to deployment.
Page 81 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 Maintaining Your Air Bag System WARNING! WARNING! Ignoring the Air Bag Warning Light in your instru- ment panel could mean you won’t have the air bags • Modifications to any part of the air bag system to protect you in a collision.
Page 82 80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE bag deployment or hitting a road obstacle, data that will WARNING! (Continued) assist in understanding how a vehicle’s systems per- • Do not attempt to modify any part of your air bag formed.
Page 83: Child Restraints
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 NOTE: EDR data are recorded by your vehicle only if a Every state in the United States, and every Canadian non-trivial crash situation occurs; no data are recorded by province, requires that small children ride in proper the EDR under normal driving conditions and no per- restraint systems.
Page 84 82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE There are different sizes and types of restraints for NOTE: children from newborn size to the child almost large • For additional information, refer to www.seatcheck.org enough for an adult seat belt. Always check the child seat or call 1–866–SEATCHECK (732–8243).
Page 85 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 83 Summary Of Recommendations For Restraining Children In Vehicles Child Size, Height, Weight Or Age Recommended Type Of Child Restraint Infants and Toddlers Children who are two years old or Either an Infant Carrier or a Convertible younger and who have not reached the Child Restraint, facing rearward in the height or weight limits of their child re-...
Page 86 84 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Infants And Child Restraints WARNING! Safety experts recommend that children ride rear-facing • Never place a rear-facing child restraint in front of in the vehicle until they are two years old or until they an air bag.
Page 87 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 85 remain in a forward-facing child seat with a harness for WARNING! as long as possible, up to the highest weight or height allowed by the child seat. • Improper installation can lead to failure of an infant or child restraint.
Page 88 86 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Children Too Large For Booster Seats WARNING! (Continued) Children who are large enough to wear the shoulder belt • When your child restraint is not in use, secure it in comfortably, and whose legs are long enough to bend the vehicle with the seat belt or LATCH anchor- over the front of the seat when their back is against the ages, or remove it from the vehicle.
Page 89 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 87 2. Do the child’s knees bend comfortably over the front WARNING! of the vehicle seat – while they are still sitting all the way back? Never allow a child to put the shoulder belt under an arm or behind their back.
Page 90 88 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Recommendations For Attaching Child Restraints Restraint Type Combined Use any attachment method shown with an “X” Below Weight of the LATCH – Seat Belt Only LATCH – Seat Belt + Top Child + Child Lower Anchors Lower Anchors Tether Anchor...
Page 91 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 89 Lower Anchors And Tethers For Children (LATCH) Your vehicle is equipped with the child restraint anchor- Restraint System age system called LATCH, which stands for Lower Anchors and Tethers for CHildren. The LATCH system has three vehicle anchor points for installing LATCH- equipped child seats.
Page 92 90 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE LATCH Positions For Installing Child Restraints In This Vehicle Lower Anchorage Symbol 2 anchorages per • seating position Top Tether Anchorage Symbol •...
Page 93 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 91 What is the weight limit (child’s weight + 65 lbs (29.5 kg) Use the LATCH anchorage system until the weight of the child restraint) for using the combined weight of the child and the child LATCH anchorage system to attach the child restraint is 65 lbs (29.5 kg).
Page 94 92 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Can two child restraints be attached using a Never “share” a LATCH anchorage with two common lower LATCH anchorage? or more child restraints. If the center posi- tion does not have dedicated LATCH lower anchorages, use the seat belt to install a child seat in the center position next to a child seat using the LATCH anchorages in an out-...
Page 95 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 93 Locating The LATCH Anchorages The lower anchorages are round bars that are found at the rear of the seat cushion where it meets the seatback, below the anchorage sym- bols on the seatback. They are just visible when you lean into the rear seat to install the child restraint.
Page 96 94 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE rear-facing child restraints will also be equipped with a tether strap. The tether strap will have a hook at the end to attach to the top tether anchorage and a way to tighten the strap after it is attached to the anchorage.
Page 97 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 95 Center Arm Rest Tether For rear-facing child restraints secured in the center seat position with the vehicle seat belts, the rear center seat position has an armrest tether that secures the arm rest in the upward position.
Page 98 96 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Install A LATCH-Compatible Child Restraint 1. If the selected seating position has a Switchable Auto- matic Locking Retractor (ALR) seat belt, stow the seat belt following the instructions below. See the section “Installing Child Restraints Using the Vehicle Seat Belt”...
Page 99 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 97 move it to its rear-most position to make room for the 5. If the child restraint has a tether strap, connect it to the child seat. You may also move the front seat forward top tether anchorage.
Page 100 98 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE How To Stow An Unused ALR Seatbelt: WARNING! When using the LATCH attaching system to install a child • Improper installation of a child restraint to the restraint, stow all ALR seat belts that are not being used by LATCH anchorages can lead to failure of the re- other occupants or being used to secure child restraints.
Page 101 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 99 Installing Child Restraints Using The Vehicle Seat Lap/Shoulder Belt Systems For Installing Child Belt Restraints In This Vehicle The seat belts in the passenger seating positions are equipped with a Switchable Automatic Locking Retractor (ALR) that is designed to keep the lap portion of the seat belt tight around the child restraint so that it is not necessary to use a locking clip.
Page 102 100 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE What is the weight limit (child’s Weight limit of the Child Restraint Always use the tether anchor when weight + weight of the child re- using the seat belt to install a for- straint) for using the Tether Anchor ward facing child restraint, up to with the seat belt to attach a forward...
Page 103 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 101 Installing A Child Restraint With A Switchable 4. Pull on the webbing to make the lap portion tight Automatic Locking Retractor (ALR) against the child seat. 1. Place the child seat in the center of the seating 5.
Page 104 102 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 8. If the child restraint has a top tether strap and the Installing Child Restraints Using the Top Tether seating position has a top tether anchorage, connect Anchorage the tether strap to the anchorage and tighten the tether strap.
Page 105 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 103 Pulling Down The Carpet Floor Panel To Access Top Top Tether Strap Anchorage (Located on Seatback) Tether Strap Anchorage 3. Route the tether strap to provide the most direct path for the strap between the anchor and the child seat. If your vehicle is equipped with adjustable rear head restraints, raise the head restraint, and where possible, route the tether strap under the head restraint and...
Page 106 104 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE between the two posts. If not possible, lower the head restraint and pass the tether strap around the outboard side of the head restraint. 4. For the center seating position, route the tether strap over the seatback and headrest then attach the hook to the tether anchor located on the back of the seat.
Page 107: Transporting Pets
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 105 Transporting Pets WARNING! Air Bags deploying in the front seat could harm your pet. • The top tether anchorages are not visible until the An unrestrained pet will be thrown about and possibly gap panel is folded down.
Page 108 106 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE It is recommended for the operator to observe the follow- 100 to 300 miles (161 to 483 km): ing driving behaviors during the new vehicle break-in • Depress the accelerator pedal slowly and not more period: than halfway to avoid rapid acceleration in lower 0 to 100 miles (0 to 161 km):...
Page 109: Safety Tips
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 107 For the first 1500 mi (2414 km): WARNING! • Do not participate in track events, sport driving • Do not leave children or animals inside parked schools, or similar activities during the first 1500 mi vehicles in hot weather.
Page 110: Exhaust Gas
108 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Exhaust Gas WARNING! (Continued) • If it is necessary to sit in a parked vehicle with the WARNING! engine running, adjust your heating or cooling Exhaust gases can injure or kill. They contain carbon controls to force outside air into the vehicle.
Page 111: Safety Checks You Should Make Inside The Vehicle
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 109 not lit during starting, see your authorized dealer. If the Safety Checks You Should Make Inside The light stays on, flickers, or comes on while driving, have Vehicle the system checked by an authorized dealer. Seat Belts Defroster Inspect the seat belt system periodically, checking for...
Page 112 110 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! (Continued) • Check mounting of mats on a regular basis. Always Pedals that cannot move freely can cause loss of properly reinstall and secure floor mats that have vehicle control and increase the risk of serious per- been removed for cleaning.
Page 113: Periodic Safety Checks You Should Make Outside The Vehicle
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 111 Lights Periodic Safety Checks You Should Make Outside The Vehicle Have someone observe the operation of brake lights and exterior lights while you work the controls. Check turn Tires signal and high beam indicator lights on the instrument Examine tires for excessive tread wear and uneven wear panel.
Page 115 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS MIRRORS ......121 ▫ Heated Mirrors — If Equipped ...130 ▫...
Page 116 114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE SEATS ......141 ▫ Reclining Rear Seat ....159 ▫...
Page 117 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 ▫ Daytime Running Lights — If Equipped ..169 ▫ Multifunction Lever ....175 ▫...
Page 118 116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE POWER TILT/TELESCOPING STEERING ▫ Activating Adaptive Cruise Control (ACC)..193 COLUMN — IF EQUIPPED ....182 ▫ To Activate/Deactivate....194 HEATED STEERING WHEEL —...
Page 119 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 ▫ General Information ....212 ▫ ParkSense® Warning Display ... . .221 ▫...
Page 120 118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Cleaning The ParkSense® System ..238 ▫ Using HomeLink® ....252 ▫...
Page 121 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 ▫ Sunroof Maintenance ....258 ▫ Pinch Protect Feature ....262 ▫...
Page 122 120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CARGO AREA FEATURES ....274 REAR WINDOW FEATURES ....280 ▫...
Page 123: Mirrors
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 MIRRORS Inside Day/Night Mirror — If Equipped A single ball joint mirror is provided in the vehicle. It is a twist on mirror that has a fixed position at the wind- shield. The mirror installs on the windshield button with a counterclockwise rotation and requires no tools for mounting.
Page 124 122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE left, and right for various drivers. The mirror should be adjusted to center on the view through the rear window. This mirror automatically adjusts for headlight glare from vehicles behind you. NOTE: The Automatic Dimming Mirror feature is dis- abled when the vehicle is in reverse gear to improve rear view viewing.
Page 125 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 NOTE: The ASSIST and 9–1–1 features operate through • Vehicle Customer Care – Total support for all other the Uconnect® Access service. These buttons will only vehicle issues. operate as long as your Uconnect® Access service is 9-1-1 Call active.
Page 126 124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Once a connection between the vehicle and a 9-1-1 NOTE: Once a connection is made between the vehicle’s operator is made, the 9-1-1 Call system may transmit 9-1-1 Call system and the 9-1-1 operator, the 9-1-1 opera- the following important vehicle information to a 9-1-1 tor may be able to open a voice connection with the operator:...
Page 127 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 WARNING! WARNING! (Continued) DURING OR AFTER AN ACCIDENT), THE • If anyone in the vehicle could be in danger (e.g., UCONNECT FEATURES, APPS AND SERVICES, fire or smoke is visible, dangerous road conditions AMONG OTHERS, WILL NOT OPERATE.
Page 128 126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If the 9-1-1 Call system detects a malfunction, any of the WARNING! following may occur at the time the malfunction is detected, and at the beginning of each ignition cycle: • Ignoring the Rearview Mirror light could mean you will not have 9-1-1 Call services.
Page 129 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 Even if the 9-1-1 Call system is fully functional, factors • Operator error by the 9-1-1 operator. beyond Chrysler Group LLC’s control may prevent or • Wireless network congestion. stop the 9-1-1 Call system operation. These include, but are not limited to, the following factors: •...
Page 130: Outside Mirrors
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! WARNING! (Continued) collide with another vehicle or other object. Use your To avoid damage to the mirror during cleaning, never inside mirror when judging the size or distance of a spray any cleaning solution directly onto the mirror. vehicle seen in the passenger side convex mirror.
Page 131: Power Folding Outside Mirrors - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 Power Folding Outside Mirrors — If Equipped If equipped with power folding mirrors, they can be electrically folded rearward and unfolded into the drive position. The switch for the power folding mirrors is located between the power mirror switches L (left) and R (right).
Page 132: Outside Automatic Dimming Mirrors
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE you want to adjust. Using the mirror control switch, press Power mirror preselected positions can be controlled by on any of the four arrows for the direction that you want the optional Memory Seat Feature. Refer to “Driver the mirror to move.
Page 133: Tilt Mirrors In Reverse (Available With Memory Seat Only) - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 Tilt Mirrors In Reverse (Available With Memory Illuminated Vanity Mirrors Seat Only) — If Equipped To access an illuminated vanity mirror, flip down one of Tilt Mirrors in Reverse provides automatic outside mirror the visors.
Page 134: Sun Visor "Slide-On-Rod" Feature - If Equipped
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Sun Visor “Slide-On-Rod” Feature — If Equipped The sun visor “Slide-On-Rod” feature allows for addi- tional flexibility in positioning the sun visor to block out the sun. 1. Fold down the sun visor. 2.
Page 135 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 The BSM detection zone covers approximately one lane • The BSM system detection zone DOES NOT change if width on both sides of the vehicle (12 ft or 3.8 m). The your vehicle is towing a trailer. Therefore, visually zone length starts at the outside rear view mirror and verify the adjacent lane is clear for both your vehicle extends approximately 10 ft (3 m) beyond the rear...
Page 136 134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Sensor Location Warning Light Location The BSM system notifies the driver of objects in the The BSM system monitors the detection zone from three detection zones by illuminating the BSM warning light different entry points (side, rear, front) while driving to located in the outside mirrors in addition to sounding an see if an alert is necessary.
Page 137 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 Entering From The Side Entering From The Rear Vehicles that move into your adjacent lanes from either Vehicles that come up from behind your vehicle on either side of the vehicle. side and enter the rear detection zone with a relative speed of less than 30 mph (48 km/h).
Page 138 136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Overtaking Traffic If you pass another vehicle slowly (with a relative speed less than 10 mph (16 km/h) and the vehicle remains in the blind spot for approximately 1.5 seconds, the warning light will be illuminated. If the difference in speed between the two vehicles is greater than 10 mph (16 km/h), the warning light will not illuminate.
Page 139 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 Overtaking/Passing Stationary Objects The BSM system is designed not to issue an alert on The BSM system will not alert you of objects that are stationary objects such as guardrails, posts, walls, foliage, traveling in the opposite direction of the vehicle in berms, etc.
Page 140: Rear Cross Path
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! The Blind Spot Monitoring system is only an aid to help detect objects in the blind spot zones. The BSM system is not designed to detect pedestrians, bicy- clists, or animals. Even if your vehicle is equipped with the BSM system, always check your vehicles mirrors, glance over your shoulder, and use your turn signal before changing lanes.
Page 141 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 NOTE: In a parking lot situation, oncoming vehicles can be obscured by vehicles parked on either side. If the sensors are blocked by other structures or vehicles, the system will not be able to alert the driver. When RCP is on and the vehicle is in REVERSE, the driver is alerted using both the visual and audible alarms, including reducing the radio volume.
Page 142: Modes Of Operation
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE turn signal is then activated, and it corresponds to an Modes Of Operation alert present on that side of the vehicle, an audible chime Three selectable modes of operation are available in the will also be sounded.
Page 143: General Information
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 NOTE: The BSM system will store the current operating SEATS mode when the vehicle is shut off. Each time the vehicle Seats are part of the Occupant Restraint System of the is started the previously stored mode will be recalled and vehicle.
Page 144: Power Seats - If Equipped
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power Seats — If Equipped Some models may be equipped with eight-way power driver and front passenger seats. The power seat switches are located on the outboard side of the seat. There are two switches that control the movement of the seat cushion and the seatback.
Page 145 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 Adjusting The Seat Forward Or Rearward Reclining The Seatback The seat can be adjusted both forward and rearward. The angle of the seatback can be adjusted forward or Push the seat switch forward or rearward, the seat will rearward.
Page 146: Passenger's Power Seat
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE outboard side of the seat. The switch is used to control WARNING! (Continued) the movement of the seat and seat cushion. • Do not ride with the seatback reclined so that the Adjusting The Seat Forward Or Rearward shoulder belt is no longer resting against your chest.
Page 147: Power Lumbar - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 the seat switch, the front of the seat cushion will move in the direction of the switch. Release the switch when you have reached the desired position. Power Lumbar — If Equipped Vehicles equipped with power driver or passenger seats may also be equipped with power lumbar.
Page 148: Manual Front Seats Forward/Rearward Adjustment
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE While sitting in the seat, lift up on the bar located under Manual Front Seats Forward/Rearward the seat cushion and move the seat forward or rearward. Adjustment Release the bar once you have reached the desired Some models may be equipped with a manual front position.
Page 149: Manual Front Passenger Seatback Adjustment - Recline
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 Manual Front Passenger Seatback Adjustment — WARNING! Recline Do not ride with the seatback reclined so that the To adjust the seatback, lift the lever located on the shoulder belt is no longer resting against your chest. outboard side of the seat, lean back to the desired In a collision you could slide under the seat belt, position and release the lever.
Page 150: Heated Seats - If Equipped
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaus- tion or other physical condition must exercise care when using the seat heater.
Page 151 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 • Press the heated seat button once to turn the Vehicles Equipped With Remote Start HIGH setting ON. On models that are equipped with remote start, the • Press the heated seat button a second time to turn heated seats can be programed to come on during a the LOW setting ON.
Page 152 150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE You can choose from HIGH, LOW or OFF heat settings. Amber indicator lights in each switch indicate the level of heat in use. Two indicator lights will illuminate for HIGH, one for LOW and none for OFF. Press the switch once to select HIGH-level heating.
Page 153: Front Ventilated Seats - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 move air through fine perforations in the seat cover to WARNING! help keep the driver and front passenger cooler in higher ambient temperatures. The fans operate at two speeds, • Persons who are unable to feel pain to the skin HIGH and LOW.
Page 154: Head Restraints
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Vehicles Equipped With Remote Start WARNING! On models that are equipped with remote start, the The head restraints for all occupants must be prop- ventilated seats can be programed to come on during a erly adjusted prior to operating the vehicle or occu- remote start.
Page 155 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 When AHRs deploy during a rear impact, the front half of the head restraint extends forward to reduce the gap between the back of the occupant’s head and the AHR. This system is design to reduce the risk of injury to the driver or front passenger in certain types of rear impacts.
Page 156 154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Active Head Restraint (Normal Position) Active Head Restraint (Tilted) NOTE: • The head restraints should only be removed by quali- fied technicians, for service purposes only. If either of the head restraints require removal, see your autho- rized dealer.
Page 157 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 • In the event of deployment of an Active Head Re- WARNING! (Continued) straint, refer to “Occupant Restraints/Resetting Active • Active Head Restraints may be deployed if they are Head Restraints (AHR)” in “Things To Know Before struck by an object such as a hand, foot or loose Starting Your Vehicle”...
Page 158: 60/40 Split Rear Seat
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The center head restraint has limited adjustment. Lift WARNING! upward on the head restraint to raise it, or push down- ward on the head restraint to lower it. Sitting in a seat with the head restraint in its lowered position could result in serious injury or death in a collision.
Page 159 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 NOTE: Be sure that the front seats are fully upright and NOTE: positioned forward. This will allow the rear seatback to • Do not fold the 60% rear seat down with the left fold down easily.
Page 160 158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Fold the rear seat completely forward. locking, you will have difficulty returning the seat to its proper position. WARNING! • Be certain that the seatback is securely locked into position. If the seatback is not securely locked into position the seat will not provide the proper stabil- ity for child seats and/or passengers.
Page 161: Reclining Rear Seat
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 Reclining Rear Seat WARNING! To recline the seatback, lift the lever located on the Do not ride with the seatback reclined so that the outboard side of the seat, lean back and release the lever shoulder belt is no longer resting against your chest.
Page 162: Programming The Memory Feature
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Your vehicle is equipped with two RKE trans- mitters, one RKE transmitter can be linked to memory position 1 and the other transmitter can be linked to memory position 2. The memory seat switch is located on the driver’s door trim panel.
Page 163: Linking And Unlinking The Remote Keyless Entry Transmitter To Memory
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 2. Adjust all memory profile settings to desired prefer- Linking And Unlinking The Remote Keyless Entry ences (i.e., seat, side mirror, power tilt and telescopic Transmitter To Memory steering column [if equipped], and radio station pre- Your RKE transmitters can be programmed to recall one sets).
Page 164: Memory Position Recall
162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Once the profile has been recalled, press and release Driver One Memory Position Recall the SET (S) button on the memory switch. • To recall the memory settings for driver one using the 4.
Page 165: Easy Entry/Exit Seat
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 recall is cancelled, the driver’s seat, steering column (if • The Easy Entry/Easy Exit feature is disabled when the equipped) and pedals (if equipped) stop moving. A delay driver seat position is less than 0.9 in (22.7 mm) of one second will occur before another recall can be forward of the rear stop.
Page 166: To Open And Close The Hood
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Reach under the hood, move safety latch to the left TO OPEN AND CLOSE THE HOOD and lift the hood. To open the hood, two latches must be released. 1. Pull the release lever located below the instrument panel and in front of the driver’s door.
Page 167: Lights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 LIGHTS CAUTION! Headlight Switch To prevent possible damage, do not slam the hood to The headlight switch is located on the left side of the close it. Use a firm downward push at the front center instrument panel, next to the steering wheel.
Page 168 166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: • Your vehicle is equipped with plastic headlight and fog light (if equipped) lenses that are lighter and less susceptible to stone breakage than glass lights. Plastic is not as scratch resistant as glass and therefore differ- ent lens cleaning procedures must be followed.
Page 169: Automatic Headlights - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 through the Uconnect® system screen. Refer to Automatic Headlights — If Equipped “Uconnect® Settings” in “Understanding Your Instru- This system automatically turns the headlights on or off ment Panel” for further information. according to ambient light levels. To turn the system on, rotate the headlight switch to the A (AUTO) position.
Page 170 168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE specific light and automatically switches from high To Activate beams to low beams until the approaching vehicle is out 1. Enable the Automatic High Beams through the of view. Uconnect® system screen. Refer to “Uconnect® Set- NOTE: tings”...
Page 171: Daytime Running Lights - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 2. Push back on the multifunction lever once again to Adaptive Bi-Xenon High Intensity Discharge reactivate the system. Headlights — If Equipped This system automatically swivels the headlight beam Daytime Running Lights — If Equipped pattern horizontally to provide increased illumination in The Daytime Running Lights (bright intensity) come on the direction the vehicle is steering.
Page 172: Headlight Delay
170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Headlight Delay Fog Lights — If Equipped To aid in your exit, your vehicle is equipped with a The fog lights are turned on by rotating the headlight headlight delay that will leave the headlights on for switch to the parking light or headlight position and approximately 90 seconds.
Page 173: Interior Lights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 The fog lights will operate only when the parking lights “Party” mode because it allows the doors to stay open for are on or when the vehicle headlights are on low beam. extended periods of time without discharging the vehi- An indicator light located in the instrument cluster will cle’s battery.
Page 174: Lights-On Reminder
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Battery Saver To protect the life of your vehicle’s battery, load shedding is provided for both the interior and exterior lights. If the ignition is OFF and any door is left ajar for 10 minutes or the dimmer control is rotated all the way up to the dome ON position for 10 minutes, the interior lights will automatically turn off.
Page 175: Front Map/Reading Lights - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 second time. The lights will also turn on when the Front Map/Reading Lights — If Equipped UNLOCK button on the Remote Keyless Entry (RKE) is The front map/reading lights are mounted in the over- pressed.
Page 176: Courtesy Lights
174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Courtesy Lights Ambient Light — If Equipped The courtesy lights can be turned on by pressing the top The overhead console is equipped with an ambient light corner of the lens. To turn the lights off, press the lens a feature.
Page 177: Multifunction Lever
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 Multifunction Lever Turn Signals The multifunction lever is located on the left side of the Move the multifunction lever up or down and the arrows steering column. on each side of the instrument cluster flash to show proper operation of the front and rear turn signal lights.
Page 178: Flash-To-Pass
176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Flash-To-Pass You can signal another vehicle with your headlights by partially pulling the multifunction lever toward the steer- ing wheel. This will cause the high beam headlights to turn on until the lever is released. High/Low Beam Switch Push the multifunction lever toward the instrument panel to switch the headlights to high beam.
Page 179: Windshield Wiper Operation
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 Windshield Wiper Operation CAUTION! Rotate the end of the lever to one of the first four detent Always remove any buildup of snow that prevents positions for intermittent settings, the fifth detent for low the windshield wiper blades from returning to the wiper operation and the sixth detent for high wiper “park”...
Page 180: Windshield Washer Operation
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE lever is pushed while in the intermittent setting, the wipers will turn on and operate for several wipe cycles after the end of the lever is released, and then resume the intermittent interval previously selected. Intermittent Wiper Operation NOTE: If the vehicle is moving less than 10 mph (16 km/h), delay times will be doubled.
Page 181: Mist
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 If the end of the lever is pushed while the wipers are in NOTE: The mist feature does not activate the washer the off position, the wipers will operate for several wipe pump; therefore, no washer fluid will be sprayed on the cycles, then turn off.
Page 182: Rain Sensing Wipers - If Equipped
180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The Rain Sensing feature may not function properly Rain Sensing Wipers — If Equipped when ice, or dried salt water is present on the wind- This feature senses moisture on the windshield and shield.
Page 183: Tilt/Telescoping Steering Column
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181 • Transmission In NEUTRAL Position — When the TILT/TELESCOPING STEERING COLUMN ignition is ON, and the automatic transmission is in This feature allows you to tilt the steering column the NEUTRAL position, the Rain Sensing system will upward or downward.
Page 184: Power Tilt/Telescoping Steering Column - If Equipped
182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To unlock the steering column, push the lever downward POWER TILT/TELESCOPING STEERING COLUMN (toward the floor). To tilt the steering column, move the — IF EQUIPPED steering wheel upward or downward as desired. To This feature allows you to tilt the steering column lengthen or shorten the steering column, pull the steering upward or downward.
Page 185: Heated Steering Wheel - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183 To tilt the steering column, move the lever up or down as HEATED STEERING WHEEL — IF EQUIPPED desired. To lengthen or shorten the steering column, pull The steering wheel contains a heating element that helps the lever toward you or push the lever away from you as warm your hands in cold weather.
Page 186: Electronic Speed Control - If Equipped
184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The engine must be running for the heated WARNING! steering wheel to operate. • Persons who are unable to feel pain to the skin Vehicles Equipped With Remote Start because of advanced age, chronic illness, diabetes, On models that are equipped with remote start, the spinal cord injury, medication, alcohol use, exhaus- heated steering wheel can be programmed to come on...
Page 187: To Activate
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 185 The Electronic Speed Control buttons are located on the NOTE: In order to ensure proper operation, the Elec- right side of the steering wheel. tronic Speed Control System has been designed to shut down if multiple Speed Control functions are operated at the same time.
Page 188: To Set A Desired Speed
186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Deactivate WARNING! A soft tap on the brake pedal, pushing the CANCEL Leaving the Electronic Speed Control system on button, or normal brake pressure while slowing the when not in use is dangerous. You could accidentally vehicle will deactivate the Electronic Speed Control with- set the system or cause it to go faster than you want.
Page 189 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 187 The speed increment shown is dependant on the chosen To Decrease Speed speed unit of U.S. (mph) or Metric (km/h): When the Electronic Speed Control is set, you can de- crease speed by pushing the SET - button. U.S.
Page 190: To Accelerate For Passing
188 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • If the button is continually pressed, the set speed will On steep hills, a greater speed loss or gain may occur so continue to decrease until the button is released, then it may be preferable to drive without Electronic Speed the new set speed will be established.
Page 191: Adaptive Cruise Control (Acc) - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 189 • If the ACC sensor detects a vehicle ahead, ACC will ADAPTIVE CRUISE CONTROL (ACC) — IF apply limited braking or acceleration (not to exceed the EQUIPPED original set speed) automatically to maintain a preset Adaptive Cruise Control (ACC) increases the driving following distance, while matching the speed of the convenience provided by cruise control while traveling...
Page 192 190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) WARNING! (Continued) • The ACC system: • Will bring the vehicle to a complete stop while following a target vehicle and hold the vehicle for • Does not react to pedestrians, oncoming vehicles, 2 seconds in the stop position.
Page 193 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 191 NOTE: Normal (fixed speed) electronic speed control WARNING! (Continued) will not react to preceding vehicles. Always be aware of • When circumstances do not allow safe driving at a the mode selected. constant speed. You can change the mode by using the Cruise Control The Cruise Control system has two control modes: buttons.
Page 194: Adaptive Cruise Control (Acc) Operation
192 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Adaptive Cruise Control (ACC) Operation The speed control buttons (located on the right side of the steering wheel) operates the ACC system. Adaptive Cruise Control Buttons 1 — NORMAL (FIXED SPEED) CRUISE CONTROL ON/OFF 2 —...
Page 195: Activating Adaptive Cruise Control (Acc)
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 193 NOTE: Any chassis/suspension or tire size modifications NOTE: You cannot engage ACC under the following to the vehicle will effect the performance of the Adaptive conditions: Cruise Control and Forward Collision Warning System. •...
Page 196: To Activate/Deactivate
194 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To turn the system OFF, push and release the Adaptive To Activate/Deactivate Cruise Control (ACC) ON/OFF button again. At this Push and release the Adaptive Cruise Control (ACC) time, the system will turn off and the DID will display ON/OFF button.
Page 197: To Set A Desired Acc Speed
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 195 NOTE: ACC cannot be set if there is a stationary vehicle WARNING! in front of your vehicle in close proximity. Leaving the Adaptive Cruise Control (ACC) system Remove your foot from the accelerator pedal. If you do on when not in use is dangerous.
Page 198: To Turn Off
196 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The shift lever/gear selector is removed from the • The Normal (Fixed Speed) Electronic Speed Control Drive position. ON/OFF button is pressed. • The Electronic Stability Control/Traction Control Sys- • The ignition is turned OFF. tem (ESC/TCS) activates.
Page 199: To Vary The Speed Setting
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 197 The speed increment shown is dependant on the chosen WARNING! speed unit of U.S. (mph) or Metric (km/h): The Resume function should only be used if traffic U.S. Speed (mph) and road conditions permit. Resuming a set speed •...
Page 200 198 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • If the button is continually pressed, the set speed will Metric Speed (km/h) continue to increase in 10 km/h increments until the • Pressing the SET - button once will result in a 1 km/h button is released.
Page 201: Setting The Following Distance In Acc
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 199 • The ACC system applies the brake down to a full stop Using this distance setting and the vehicle speed, ACC when following a target vehicle. If an ACC host vehicle calculates and sets the distance to the vehicle ahead. This follows a target vehicle to a standstill, the host vehicle distance setting displays in the DID.
Page 202 200 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Distance Setting 3 Bars (Long) Distance Setting 2 Bars (Medium)
Page 203 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 201 To decrease the distance setting, press the Distance Setting — Decrease button and release. Each time the button is pressed, the distance setting decreases by one bar (shorter). If there is no vehicle ahead, the vehicle will maintain the set speed.
Page 204 202 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The system disengages. (Refer to the information on ACC Activation). The maximum braking applied by ACC is limited; how- ever, the driver can always apply the brakes manually, if necessary. NOTE: The brake lights will illuminate whenever the ACC system applies the brakes.
Page 205: Overtake Aid
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 203 Overtake Aid ACC Operation At Stop When driving with ACC engaged and following a target If the ACC system brings your vehicle to a standstill vehicle, the system will provide an additional accelera- while following a target vehicle, if the target vehicle starts tion to assist in passing vehicles in front.
Page 206: Adaptive Cruise Control (Acc) Menu
204 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Adaptive Cruise Control Ready WARNING! When ACC is activated but the vehicle speed setting has When the ACC system is resumed, the driver must not been selected, the display will read “Adaptive Cruise ensure that there are no pedestrians, vehicles or Control Ready.”...
Page 207: Display Warnings And Maintenance
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 205 • ACC Proximity Warning The “ACC/FCW Unavailable Wipe Front Radar Sensor” message can sometimes be displayed while driving in • ACC Unavailable Warning highly reflective areas (i.e. tunnels with reflective tiles, or • The DID will return to the last display selected after ice and snow).
Page 208 206 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To keep the ACC System operating properly, it is impor- When the condition that deactivated the system is no tant to note the following maintenance items: longer present, the system will return to the “Adaptive Cruise Control Off”...
Page 209 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 207 indicate when conditions temporarily limit system per- back side of the inside rear view mirror. They may formance. This most often occurs at times of poor visibil- require cleaning or removal of an obstruction. ity, such as in snow or heavy rain and fog.
Page 210: Precautions While Driving With Acc
208 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If this occurs, try activating ACC again later, following a key cycle. If the problem persists, see your authorized dealer. Precautions While Driving With ACC In certain driving situations, ACC may have detection issues.
Page 211 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 209 the vehicle is out of the curve the system will resume Using ACC On Hills your original Set Speed. This is a part of normal ACC When driving on hills, ACC may not detect a vehicle in system functionality.
Page 212 210 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Lane Changing ACC may not detect a vehicle until it is completely in the lane in which you are traveling. In the illustration shown, ACC has not yet detected the vehicle changing lanes and it may not detect the vehicle until it’s too late for the ACC system to take action.
Page 213 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 211 Narrow Vehicles Stationary Objects And Vehicles Some narrow vehicles traveling near the outer edges of ACC does not react to stationary objects and stationary the lane or edging into the lane are not detected until they vehicles.
Page 214: General Information
212 UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information Normal (Fixed Speed) Electronic Speed Control Mode This vehicle has systems that operate on radio frequency that comply with Part 15 of the Federal Communications In addition to Adaptive Cruise Control mode, a Normal Commission (FCC) rules and with Industry Canada (Fixed Speed) Electronic Speed Control mode is available Standards RSS- GEN/210/220/310.
Page 215 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 213 Once a speed has been set a message (CRUISE CON- WARNING! TROL SET TO MPH/KM) will appear indicating what speed was set. This light will turn on when the electronic In the normal Cruise Control mode, the system will speed control is SET.
Page 216 214 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • If the button is continually pressed, the set speed will • If the button is continually pressed, the set speed will continue to increase in 5 mph increments until the continue to decrease in 5 mph increments until the button is released.
Page 217 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 215 To Cancel To Resume Speed The following conditions will cancel the Normal (Fixed To resume a previously set speed, push the RES button Speed) Electronic Speed Control without clearing the and release. Resume can be used at any speed above memory: 20 mph (32 km/h).
Page 218: Forward Collision Warning (Fcw) With Mitigation - If Equipped
216 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: FCW monitors the information from the forward FORWARD COLLISION WARNING (FCW) WITH looking sensors as well as the Electronic Brake Controller MITIGATION — IF EQUIPPED (EBC), to calculate the probability of a forward collision. Forward Collision Warning (FCW) With Mitigation When the system determines that a forward collision is Operation...
Page 219 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 217 NOTE: • The minimum speed for FCW activation is 5 mph (10 km/h). • The FCW alerts may be triggered on objects other than vehicles such as guard rails or sign posts based on the course prediction.
Page 220: Turning Fcw On Or Off
218 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To turn the FCW system back ON, press the forward WARNING! collision button again to turn the system ON (led turns off). Forward Collision Warning (FCW) is not intended to avoid a collision on its own, nor can FCW detect Changing the FCW status to “Off”...
Page 221: Changing Fcw And Active Braking Status
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 219 NOTE: Changing FCW And Active Braking Status The FCW Sensitivity And Active Braking Settings are • The system will retain the last setting selected by the programmable through the Uconnect® System. Refer to driver after ignition shut down.
Page 222: Service Fcw Warning
220 UNDERSTANDING THE FEATURES OF YOUR VEHICLE condition that limited the system performance is no during a parking maneuver. Refer to ParkSense® System longer present, the system will return to its full perfor- Usage Precautions for limitations of this system and mance state.
Page 223: Parksense® Sensors
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 221 ParkSense® Sensors ParkSense® Display The four ParkSense® sensors, located in the rear fascia/ When the vehicle is in REVERSE, the DID will display the bumper, monitor the area behind the vehicle that is park assist ready system status.
Page 224 222 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The system will indicate a detected obstacle by showing a single arc in the left and/or right rear regions based on the obstacle’s distance and location relative to the vehicle. If an obstacle is detected in the left and/or right rear region, the display will show a single arc in the left and/or right rear region and the system will produce a tone.
Page 225 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 223 Slow Tone Fast Tone...
Page 226 224 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The vehicle is close to the obstacle when the warning display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert opera- tion when the system is detecting an obstacle: Continuous Tone...
Page 227 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 225 WARNING ALERTS Rear Distance Greater than 79-39 in 39-25 in 25-12 in Less than (in/cm) 79 in (200 cm) (200-100 cm) (100-65 cm) (65-30 cm) 12 in (30 cm) Audible Alert None Single 1/2 Slow Fast Continuous...
Page 228: Enabling And Disabling Parksense
226 UNDERSTANDING THE FEATURES OF YOUR VEHICLE system requires service, the ParkSense® switch LED will Enabling And Disabling ParkSense® blink momentarily, and then the LED will be ON. ParkSense® can be enabled and disabled with the ParkSense® switch. Service The ParkSense® Rear Park Assist System When the ParkSense®...
Page 229: Cleaning The Parksense® System
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 227 If “PARKSENSE UNAVAILABLE WIPE REAR SEN- ParkSense® System Usage Precautions SORS” appears in the Driver Information Display (DID) NOTE: make sure the outer surface and the underside of the rear fascia/bumper is clean and clear of snow, ice, mud, dirt •...
Page 230 228 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • ParkSense®, when on, will reduce the volume of the • ParkSense® should be disabled when the liftgate is in radio when it is sounding a tone. the open position and the vehicle is in REVERSE. An open liftgate could provide a false indication that an •...
Page 231: Parksense® Front And Rear Park Assist - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 229 WARNING! WARNING! (Continued) • Before using ParkSense®, it is strongly recom- • Drivers must be careful when backing up even mended that the ball mount and hitch ball assem- when using ParkSense®. Always check carefully bly is disconnected from the vehicle when the behind your vehicle, look behind you, and be sure vehicle is not used for towing.
Page 232: Parksense® Sensors
230 UNDERSTANDING THE FEATURES OF YOUR VEHICLE up or moving forward, e.g. during a parking maneuver. ParkSense® Sensors Refer to ParkSense® System Usage Precautions for limi- The four ParkSense® sensors, located in the rear fascia/ tations of this system and recommendations. bumper, monitor the area behind the vehicle that is within the sensors’...
Page 233: Parksense® Warning Display
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 231 ParkSense® Warning Display The ParkSense® Warning screen will only be displayed if Sound and Display is selected from the Customer - Programmable Features section of the Uconnect® Sys- tem. Refer to Uconnect® Settings” in “Understanding Your Instrument Panel”...
Page 234 232 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If an object is detected in the left and/or right rear region, the display will show a single arc in the left and/or right rear region and the system will produce a tone. As the vehicle moves closer to the object, the display will show the single arc moving closer to the vehicle and the tone will change from a single 1/2 second tone to slow, to fast,...
Page 235 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 233 Slow Tone Fast Tone...
Page 236 234 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The vehicle is close to the obstacle when the DID display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert operation when the system is detecting an obstacle: Continuous Tone...
Page 237 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 235 WARNING ALERTS Rear Distance Greater than 79 79-39 in 39-25 in 25-12 in Less than 12 in (in/cm) in (200 cm) (200-100 cm) (100-65 cm) (65-30 cm) (30 cm) Front Distance Greater than 47 47-39 in 39-25 in 25-12 in...
Page 238: Enabling And Disabling Parksense
236 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Front Park Assist Audible Alerts Enabling And Disabling ParkSense® ParkSense® can be enabled and disabled with the ParkSense® will turn off the Front Park Assist audible ParkSense® switch. alert (chime) after approximately 3 seconds when an obstacle has been detected, the vehicle is stationary, and When the ParkSense®...
Page 239: Service The Parksense® Park Assist System
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 237 system requires service, the ParkSense® switch LED will rear sensor location depending on where the fault is blink momentarily, and then the LED will be ON. detected. The system will continue to provide arc alerts for the side that is functioning properly.
Page 240: Cleaning The Parksense® System
238 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If the PARKSENSE UNAVAILABLE SERVICE RE- • When you turn ParkSense® off, the instrument cluster QUIRED message appears in the DID, see an authorized will display “PARKSENSE OFF.” Furthermore, once dealer. you turn ParkSense® off, it remains off until you turn it on again, even if you cycle the ignition key.
Page 241 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 239 • Use the ParkSense® switch to turn the ParkSense® CAUTION! system off if objects such as bicycle carriers, trailer hitches, etc. are placed within 12 in (30 cm) from the • ParkSense® is only a parking aid and it is unable to rear fascia/bumper.
Page 242 240 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! WARNING! (Continued) • Before using ParkSense®, it is strongly recom- • Drivers must be careful when backing up even mended that the ball mount and hitch ball assem- when using ParkSense®. Always check carefully bly is disconnected from the vehicle when the behind your vehicle, look behind you, and be sure vehicle is not used for towing.
Page 243: Parkview® Rear Back Up Camera - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 241 When the vehicle is shifted out of REVERSE (with camera PARKVIEW® REAR BACK UP CAMERA — IF delay turned ON), the rear view image with dynamic EQUIPPED grid lines will be displayed for up to 10 seconds after Your vehicle may be equipped with the ParkView®...
Page 244 242 UNDERSTANDING THE FEATURES OF YOUR VEHICLE When enabled, active guide lines are overlaid on the vehicle while a dashed center-line will indicate the center image to illustrate the width of the vehicle and its of the vehicle to assist with aligning to a hitch/receiver. projected backup path based on the steering wheel The following table shows the approximate distances for position.
Page 245: Overhead Console
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 243 OVERHEAD CONSOLE CAUTION! The overhead console contains courtesy/reading lights • To avoid vehicle damage, ParkView® should only and storage for sunglasses. Universal Garage Door be used as a parking aid. The ParkView® camera is Opener (HomeLink®), power liftgate and power sunroof unable to view every obstacle or object in your switches may also be included, if equipped.
Page 246: Front Map/Reading Lights - If Equipped
244 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To turn the lights off, press the switch a second time. The Front Map/Reading Lights — If Equipped lights also turn on when a door is opened. The lights will Lights are mounted in the overhead console. Each light also turn on when the UNLOCK button on the RKE is can be turned on by pressing the switch on either side of pressed.
Page 247: Courtesy Lights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 245 Courtesy Lights Sunglasses Bin Door The courtesy lights can be turned on by pressing the top At the front of the console a compartment is provided for corner of the lens. To turn the lights off, press the lens a the storage of a pair of sunglasses.
Page 248: Garage Door Opener - If Equipped
246 UNDERSTANDING THE FEATURES OF YOUR VEHICLE GARAGE DOOR OPENER — IF EQUIPPED HomeLink® replaces up to three hand-held transmitters that operate devices such as garage door openers, motor- ized gates, lighting or home security systems. The HomeLink® unit is powered by your vehicles 12 Volt battery.
Page 249: Before You Begin Programming Homelink
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 247 NOTE: Before You Begin Programming HomeLink® Be sure that your vehicle is parked outside of the garage • Erasing all channels should only be performed when before you begin programming. programming HomeLink® for the first time. Do not erase channels when programming additional buttons.
Page 250 248 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) away from the HomeLink® button you wish to pro- gram while keeping the HomeLink® indicator light in view. 3. Push and hold the HomeLink® button you want to program while you push and hold the hand-held transmitter button.
Page 251: Programming A Non-Rolling Code
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 249 Firmly push and release the “LEARN” or “TRAIN- Reprogramming A Single HomeLink® Button ING” button. On some garage door openers/devices (Rolling Code) there may be a light that blinks when the garage door To reprogram a channel that has been previously trained, opener/device is in the LEARN/TRAIN mode.
Page 252 250 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Place the hand-held transmitter 1 to 3 inches (3 to 8 • To program the two remaining HomeLink® buttons, cm) away from the HomeLink® button you wish to repeat each step for each remaining button. DO NOT program while keeping the HomeLink®...
Page 253: Canadian/Gate Operator Programming
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 251 2. Place the hand-held transmitter 1 to 3 inches (3 to Canadian/Gate Operator Programming 8 cm) away from the HomeLink® button you wish to For programming transmitters in Canada/United States program while keeping the HomeLink® indicator that require the transmitter signals to “time-out”...
Page 254: Using Homelink
252 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • If the indicator light stays on constantly, program- 3. Without releasing button proceed with ming is complete and the garage door/device should “Canadian/Gate Operator Programming” step 2 and activate when the HomeLink® button is pushed. follow all remaining steps.
Page 255: Troubleshooting Tips
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 253 The HomeLink® Universal Transceiver is disabled when WARNING! the Vehicle Security Alarm is active. Vehicle exhaust contains carbon monoxide, a danger- Troubleshooting Tips ous gas. Do not run your vehicle in the garage while If you are having trouble programming HomeLink®, programming the transceiver.
Page 256: General Information
254 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: WARNING! (Continued) • The transmitter has been tested and it complies with use a garage door opener without these safety fea- FCC and IC rules. Changes or modifications not ex- tures. Call toll-free 1–800–355–3515 or, on the Internet pressly approved by the party responsible for compli- at HomeLink.com for safety information or assis- ance could void the user’s authority to operate the...
Page 257: Power Sunroof - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 255 POWER SUNROOF — IF EQUIPPED WARNING! The power sunroof switch is located between the sun • Never leave children unattended in a vehicle, or visors on the overhead console. with access to an unlocked vehicle. Never leave the Key Fob in or near the vehicle, or in a location accessible to children.
Page 258: Opening Sunroof - Express
256 UNDERSTANDING THE FEATURES OF YOUR VEHICLE movement. The sunroof and sunshade will remain in a WARNING! (Continued) partially opened condition until the switch is pushed and • Do not allow small children to operate the sunroof. held rearward again. Never allow your fingers, other body parts, or any Closing Sunroof —...
Page 259: Pinch Protect Feature
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 257 Pinch Protect Feature Sunshade Operation This feature will detect an obstruction in the opening of The sunshade can be opened manually. However, the the sunroof during Express Close operation. If an ob- sunshade will open automatically as the sunroof opens. struction in the path of the sunroof is detected, the NOTE: The sunshade cannot be closed if the sunroof is sunroof will automatically retract.
Page 260: Sunroof Maintenance
258 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Sunroof Maintenance COMMANDVIEW® SUNROOF WITH POWER SHADE — IF EQUIPPED Use only a nonabrasive cleaner and a soft cloth to clean the glass panel. The CommandView® sunroof switch is located to the left between the sun visors on the overhead console.
Page 261 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 259 WARNING! • Never leave children unattended in a vehicle, or with access to an unlocked vehicle. Never leave the Key Fob in or near the vehicle, or in a location accessible to children. Do not leave the ignition of a vehicle equipped with Keyless Enter-N-Go™...
Page 262: Opening Sunroof - Express
260 UNDERSTANDING THE FEATURES OF YOUR VEHICLE movement. The sunroof and sunshade will remain in a WARNING! (Continued) partially opened condition until the switch is pushed and • Do not allow small children to operate the sunroof. held rearward again. Never allow your fingers, other body parts, or any Closing Sunroof —...
Page 263: Opening Power Shade - Express
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 261 the movement and the shade will remain in a partially Opening Power Shade — Express opened condition until the switch is pushed and held Press the shade switch rearward and release it within rearward again.
Page 264: Venting Sunroof - Express
262 UNDERSTANDING THE FEATURES OF YOUR VEHICLE movement and the shade will remain in a partially closed sunroof will automatically retract. Remove the obstruc- condition until the switch is pushed and held forward tion if this occurs. Next, press the switch forward and again.
Page 265: Sunroof Maintenance
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 263 Sunroof Maintenance ELECTRICAL POWER OUTLETS Use only a non-abrasive cleaner and a soft cloth to clean Your vehicle is equipped with 12 Volt (13 Amp) power the glass panel. outlets that can be used to power cellular phones, small electronics and other low powered electrical accessories.
Page 266 264 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! Power outlets are designed for accessory plugs only. Do not insert any other object in the power outlets as this will damage the outlet and blow the fuse. Improper use of the power outlet can cause damage not covered by your New Vehicle Limited Warranty.
Page 267 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 265 Center Console Outlet Rear Power Outlet The rear power outlet is located in the right rear cargo NOTE: The rear power outlet can be switched from area. switched “ignition” only to constant “battery” powered all the time.
Page 268 266 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power Outlet Right Rear Quarter Panel Fuse Power Outlet Fuse Locations 1 — F104 Fuse 20 A Yellow Power Outlet Console Bin 2 — F90–F91 Fuse 20 A Yellow Power Outlet Right Rear Quarter Panel 3 —...
Page 269 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 267 WARNING! CAUTION! To avoid serious injury or death: • Many accessories that can be plugged in draw • Only devices designed for use in this type of outlet power from the vehicle’s battery, even when not in should be inserted into any 12 Volt outlet.
Page 270: Power Inverter - If Equipped
268 UNDERSTANDING THE FEATURES OF YOUR VEHICLE POWER INVERTER — IF EQUIPPED There is a 115 Volt, 150 Watt inverter outlet located on the back of the center console to convert DC current to AC current. This outlet can power cellular phones, electron- ics and other low power devices requiring power up to 150 Watts.
Page 271: Cupholders
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 269 the circuit, check the power ratings on electrical devices prior to using the inverter. WARNING! To avoid serious injury or death: • Do not insert any objects into the receptacles. • Do not touch with wet hands. •...
Page 272: Storage
270 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Cupholders Glove Compartment To open the glove compartment, pull outward on the STORAGE latch and lower the glove compartment door. Glove Compartment The glove compartment is located on the right side of the instrument panel.
Page 273: Door Storage
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 271 Opened Glove Compartment Door Panel Storage Door Storage Large storage areas are built into the door panels for easy access.
Page 274: Console Features
272 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To open the upper storage compartment, pull upward on Console Features the small latch located on the lid. The center console contains both an upper and a lower storage area. Storage Compartment Latches Storage Compartment...
Page 275 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 273 Lift upward on the larger of the latches to access the Your vehicle may have an optional CD or DVD player lower storage compartment. located in the center console. Lower Storage Compartment Lower Storage Compartment CD/DVD Player — If Equipped...
Page 276: Cargo Area Features
274 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Press in on the flashlight to release it. WARNING! Do not operate this vehicle with a console compart- ment lid in the open position. Driving with the console compartment lid open may result in injury in a collision.
Page 277: Cargo Storage Bins
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 275 To operate the flashlight, press the switch once for high, NOTE: If your vehicle is equipped with a rear sub- twice for low, and a third time to return to off. woofer, the passenger side cargo area will not be avail- able.
Page 278 276 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Two additional storage bins are located under the load floor. To access the lower storage bins, raise the load floor and attach the tether hook (attached to the bottom of the load floor) to the liftgate opening. Lower Storage Bins Tether Strap...
Page 279: Retractable Cargo Area Cover - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 277 Retractable Cargo Area Cover — If Equipped NOTE: The purpose of this cover is for privacy, not to secure loads. It will not prevent cargo from shifting or protect passengers from loose cargo. To cover the cargo area: 1.
Page 280: Rear Cargo Tie-Downs
278 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) cover on the cargo floor or in the passenger compart- ment. Remove the cover from the vehicle when taken from its mounting. Do not store it in the vehicle. Rear Cargo Tie-Downs The rear cargo tie-downs, located on the cargo area floor, should be used to safely secure loads when the vehicle is moving.
Page 281 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 279 WARNING! WARNING! (Continued) • Do not carry loads which exceed the load limits • To help protect against personal injury, passengers described on the label attached to the left door or should not be seated in the rear cargo area. The rear left door center pillar.
Page 282: Rear Window Features
280 UNDERSTANDING THE FEATURES OF YOUR VEHICLE REAR WINDOW FEATURES Rear Window Wiper/Washer The rear wiper/washer controls are located on the mul- tifunction lever on the left side of the steering column. The rear wiper/washer is operated by rotating a switch, located at the middle of the lever.
Page 283: Rear Window Defroster
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 281 release of the switch, the wipers will resume the continu- mirrors (if equipped). An indicator in the button will ous rear wiper operation. When this rotary control is in illuminate when the rear window defroster is on. The the OFF position, rotating it downward will activate the rear window defroster automatically turns off after ap- rear washer pump which will continue to operate as long...
Page 284: Roof Luggage Rack - If Equipped
282 UNDERSTANDING THE FEATURES OF YOUR VEHICLE inside the vehicle plus that on the external rack does not CAUTION! (Continued) exceed the maximum vehicle load capacity. • Do not use scrapers, sharp instruments, or abrasive To move the crossbars, loosen the attachments, located at window cleaners on the interior surface of the the upper edge of each crossbar, approximately eight window.
Page 285 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 283 • If (or any metallic object) is placed over the satellite CAUTION! (Continued) radio antenna (if equipped), you may experience in- • To avoid damage to the roof rack and vehicle, do terruption of satellite radio reception. For improved not exceed the maximum roof rack load capacity of satellite radio reception, avoid placing the rear cross- 150 lb (68 kg).
Page 286 284 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Cargo must be securely tied before driving your vehicle. Improperly secured loads can fly off the vehicle, particularly at high speeds, resulting in per- sonal injury or property damage. Follow the roof rack cautions when carrying cargo on your roof rack.
Page 287 UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS INSTRUMENT PANEL FEATURES ..288 ▫ DID Green Telltales ....312 INSTRUMENT CLUSTER —...
Page 288 286 UNDERSTANDING YOUR INSTRUMENT PANEL Uconnect® REAR SEAT ENTERTAINMENT ▫ Controls ......358 SYSTEM — IF EQUIPPED ....346 ▫...
Page 289 UNDERSTANDING YOUR INSTRUMENT PANEL 287 ▫ Automatic Temperature Control (ATC) ..378 ▫ Climate (8.4A/8.4AN) ....390 ▫ Operating Tips ..... . .380 ▫...
Page 290: Instrument Panel Features
288 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT PANEL FEATURES 1 — Air Outlet 6 — Lower Switch Bank 11 — Hood Release 2 — Instrument Cluster 7 — Hazard Switch 12 — Fuel Door Release 3 — Radio 8 — Storage Bin (SD Card, AUX, USB Me- 13 —...
Page 291: Instrument Cluster - Premium
UNDERSTANDING YOUR INSTRUMENT PANEL 289 INSTRUMENT CLUSTER — PREMIUM...
Page 292: Instrument Cluster Descriptions
290 UNDERSTANDING YOUR INSTRUMENT PANEL 3. Anti-Lock Brake (ABS) Light INSTRUMENT CLUSTER DESCRIPTIONS 1. Tachometer This light monitors the Anti-Lock Brake System (ABS). The light will turn on when the ignition Indicates the engine speed in revolutions per minute switch is turned to the ON/RUN position and (RPM x 1000).
Page 293 UNDERSTANDING YOUR INSTRUMENT PANEL 291 4. High Beam Indicator NOTE: If either indicator flashes at a rapid rate, check for a defective outside light bulb. Indicates that headlights are on high beam. 8. Speedometer 5. Front Fog Light Indicator — If Equipped Indicates vehicle speed.
Page 294 292 UNDERSTANDING YOUR INSTRUMENT PANEL Certain conditions, poor fuel quality, etc., may illuminate WARNING! the light after engine start. The vehicle should be serviced if the light stays on through several of your typical A malfunctioning catalytic converter, as referenced driving cycles.
Page 295 UNDERSTANDING YOUR INSTRUMENT PANEL 293 CAUTION! WARNING! (Continued) Vehicle”. Follow the warnings under the Cooling Driving with a hot engine cooling system could System Pressure Cap paragraph. damage your vehicle. If the temperature gauge reads “H” pull over and stop the vehicle. Idle the vehicle 12.
Page 296 294 UNDERSTANDING YOUR INSTRUMENT PANEL has been corrected. If the problem is related to the brake If brake failure is indicated, immediate repair is neces- booster, the ABS pump will run when applying the brake sary. and a brake pedal pulsation may be felt during each stop. WARNING! The dual brake system provides a reserve braking capac- ity in the event of a failure to a portion of the hydraulic...
Page 297 UNDERSTANDING YOUR INSTRUMENT PANEL 295 unless the parking brake is applied or a brake fault is by the vehicle manufacturer on the vehicle placard or tire detected. If the light does not illuminate, have the light inflation pressure label. (If your vehicle has tires of a inspected by an authorized dealer.
Page 298 296 UNDERSTANDING YOUR INSTRUMENT PANEL maintain correct tire pressure, even if under-inflation has replacement or alternate tires and wheels allow the TPMS not reached the level to trigger illumination of the TPMS to continue to function properly. low tire pressure telltale. CAUTION! Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not...
Page 299 UNDERSTANDING YOUR INSTRUMENT PANEL 297 U.S. Federal regulations require that upon transfer of 16. Selectable DID Menu vehicle ownership, the seller certify to the purchaser the This area of the cluster will display the DID selectable correct mileage that the vehicle has been driven. If your menu.
Page 300 298 UNDERSTANDING YOUR INSTRUMENT PANEL 18. Vehicle Security Light ON/RUN position. It should go out with the engine running. If the “ESC Activation/Malfunction Indicator This light will flash rapidly for approximately Light” comes on continuously with the engine running, a 15 seconds when the vehicle theft alarm is malfunction has been detected in the ESC system.
Page 301: Driver Information Display (Did)
UNDERSTANDING YOUR INSTRUMENT PANEL 299 • The ESC system will make buzzing or clicking sounds when it is active. This is normal; the sounds will stop when ESC becomes inactive following the maneuver that caused the ESC activation. 21. Park/Headlight ON Indicator — If Equipped This indicator will illuminate when the park lights or headlights are turned on.
Page 302 300 UNDERSTANDING YOUR INSTRUMENT PANEL • Terrain • SRT Performance Pages • Driver Assist • Fuel Economy • Trip • Audio • Stored Messages • Screen Setup DID Controls • Diagnostic Codes • UP Arrow Button The system allows the driver to select information by pressing the following buttons mounted on the steering Press and release the UP arrow button to scroll wheel:...
Page 303: Did Displays
UNDERSTANDING YOUR INSTRUMENT PANEL 301 • DOWN Arrow Button • OK Button Press and release the DOWN arrow button to The OK button may be used for the following: scroll downward through the main menu and Selection submenus. Reset (hold) •...
Page 304 302 UNDERSTANDING YOUR INSTRUMENT PANEL 3. Reconfigurable Telltales/Information • Five Second Stored Messages 4. Telltales/Indicators When the appropriate conditions occur, this type of message takes control of the main display area for five 5. Shift Lever Status (PRNDL) seconds and then returns to the previous screen. Most of 6.
Page 305: Engine Oil Life Reset
UNDERSTANDING YOUR INSTRUMENT PANEL 303 is in the RUN state. Examples of this message type are is duty cycle based, which means the engine oil change “Remote Start Aborted - Door Ajar” and “Press Brake interval may fluctuate, dependent upon your personal Pedal and Push Button to Start”.
Page 306: Did Messages
304 UNDERSTANDING YOUR INSTRUMENT PANEL 3. Without pushing the brake pedal, push and release the • Oil Change Due ENGINE START/STOP button once to return the • Fuel Low ignition to the OFF/LOCK position. • Service Antilock Brake System NOTE: If the indicator message illuminates when you start the vehicle, the oil change indicator system did not •...
Page 307 UNDERSTANDING YOUR INSTRUMENT PANEL 305 • Speed Warning Exceeded • Key in Ignition Lights On • Parking Brake Engaged • Remote Start Active Key to Run • Brake Fluid Low • Remote Start Active Push Start Button • Service Electronic Braking System •...
Page 308 306 UNDERSTANDING YOUR INSTRUMENT PANEL • Doors Open • Engage Park Brake to Prevent Rolling • Liftgate Open • Transmission Too cold Idle with Engine On • Gear Not Available • Washer Fluid Low • Shift Not Allowed • Service Air Suspension System •...
Page 309: Did White Telltales
UNDERSTANDING YOUR INSTRUMENT PANEL 307 • Vehicle Cannot Be Lowered Door Open DID White Telltales This area will show reconfigurable white caution tell- • Off Road 2 Watch For Clearance tales. These telltales include: • Entry/Exit Watch For Clearance • Cruise Ready •...
Page 310: Did Amber Telltales
308 UNDERSTANDING YOUR INSTRUMENT PANEL stop the vehicle. Then, shift the transmission into NEU- DID Amber Telltales TRAL and run the engine at idle or faster until the light This area will show reconfigurable amber caution tell- turns off. tales. These telltales include: •...
Page 311: Did Red Telltales
UNDERSTANDING YOUR INSTRUMENT PANEL 309 • Anti-Lock Brake (ABS) • Electronic Stability Control (ESC) Off This light will turn on when the ABS system is This light indicates the Electronic Stability Con- not functioning and service is required. If the trol (ESC) is off.
Page 312 310 UNDERSTANDING YOUR INSTRUMENT PANEL Do not operate the vehicle until the cause is corrected. If jump starting is required, refer to “Jump Starting This light does not show how much oil is in the engine. Procedures” in “What To Do In Emergencies”. The engine oil level must be checked under the hood.
Page 313 UNDERSTANDING YOUR INSTRUMENT PANEL 311 required. You may experience reduced performance, an • Electric Power Steering Malfunction – If Equipped elevated/rough idle or engine stall and your vehicle may This telltale is on when the Electric Power require towing. Steering is not operating and needs service. •...
Page 314: Did Green Telltales
312 UNDERSTANDING YOUR INSTRUMENT PANEL • Air Bag Warning Light • Front Fog Light Indicator — If Equipped This light will turn on for four to eight seconds This telltale will illuminate when the front fog as a bulb check when the ignition switch is first lights are on.
Page 315: Did Selectable Menu Items
UNDERSTANDING YOUR INSTRUMENT PANEL 313 Vehicle Info (Customer Information Features) DID Selectable Menu Items Push and release the UP or DOWN arrow buttons until the desired Selectable Menu icon/title is highlighted in Push and release the UP or DOWN arrow the DID.
Page 316 314 UNDERSTANDING YOUR INSTRUMENT PANEL If one or more tires have low pressure, “Inflate Tire To Oil Pressure XX” is displayed with the vehicle ICON and the tire • Displays the actual oil pressure. pressure values in each corner of the ICON with the pressure value of the low tire displayed in a different Oil Life color than the other tire pressure values.
Page 317 UNDERSTANDING YOUR INSTRUMENT PANEL 315 SRT Performance • 1/8 Mile • 1/4 Mile WARNING! • Instantaneous G-Force Measurement of vehicle statistics with the perfor- • Peak G-Force mance pages is intended for off-highway or off-road use only and should not be done on any public To access, push and release either the UP or DOWN roadways.
Page 318 316 UNDERSTANDING YOUR INSTRUMENT PANEL • The feature will “ready” when the vehicle speed is at • Engaging the parking brake will disable this feature. 0 mph (0 km/h). The word “READY” will appear • The word “READY” will display when conditions are when conditions are met for the event to begin.
Page 319 UNDERSTANDING YOUR INSTRUMENT PANEL 317 1/8 Mile, 1/4 Mile Peak G-Force When selected, this screen displays the time it takes the When selected, this screen displays all four G-Force vehicle to travel 1/8 mile within 15 seconds, (1/4 mile) values (two lateral and two longitudinal). within 25 seconds.
Page 320 318 UNDERSTANDING YOUR INSTRUMENT PANEL Fuel Economy The Trip A and Trip B information will display the following: Push and release the UP or DOWN arrow • Distance mi button until the Fuel Economy Menu icon/title • Average Fuel Economy is highlighted.
Page 321 UNDERSTANDING YOUR INSTRUMENT PANEL 319 Stored Messages Screen Setup Driver Selectable Items Current Gear Push and release the UP or DOWN arrow button until the Messages Menu icon/title is highlighted in • On the DID. This feature shows the number of •...
Page 322: Uconnect® Settings
320 UNDERSTANDING YOUR INSTRUMENT PANEL Upper Right Diagnostics — If Equipped • None Push and release the UP or DOWN arrow • Compass (default setting) button until the Diagnostics display icon/title • Outside Temp is highlighted in the DID. Push and release and release the RIGHT arrow button to display the •...
Page 323: Buttons On The Faceplate
UNDERSTANDING YOUR INSTRUMENT PANEL 321 Buttons On The Faceplate Buttons on the faceplate are located below the Uconnect® system in the center of the instrument panel. In addition, there is a Scroll/Enter control knob located on the right side of the Climate Controls in the center of the instru- ment panel.
Page 324: Buttons On The Touchscreen
322 UNDERSTANDING YOUR INSTRUMENT PANEL press and release the preferred setting until a check-mark Buttons On The Touchscreen appears next to the setting, showing that the setting has Buttons on the touchscreen are accessible on the been selected. Uconnect® display. Once the setting is complete, press the Back Arrow Customer Programmable Features —...
Page 325 UNDERSTANDING YOUR INSTRUMENT PANEL 323 next to the setting, showing that setting has been se- NOTE: To make changes to the Display Brightness with lected. Then press the arrow back button on the touch- Headlights ON setting, the headlights must be on and screen.
Page 326 324 UNDERSTANDING YOUR INSTRUMENT PANEL • Set Theme between US and Metric units of measure. Press “US” or “Metric” until a check-mark appears next to the setting, This feature will allow you to choose a background showing that setting has been selected. Press the back arrow theme for the display screen.
Page 327 UNDERSTANDING YOUR INSTRUMENT PANEL 325 that setting has been selected. Press the back arrow setting, showing that setting has been selected. Press the button on the touchscreen to return to the previous back arrow button on the touchscreen to return to the menu.
Page 328 326 UNDERSTANDING YOUR INSTRUMENT PANEL Clock • Set Time Minutes After pressing the “Clock” button on the touchscreen the This feature will allow you to adjust the minutes. The following settings will be available: “Sync time with GPS” button on the touchscreen must be unchecked.
Page 329 UNDERSTANDING YOUR INSTRUMENT PANEL 327 Status setting press the “Show Time in Status Bar” button setting. This warns you of a possible collision when you on the touchscreen until a check-mark appears next to are much closer to the vehicle in front of you. To change setting, indicating that the setting has been selected.
Page 330 328 UNDERSTANDING YOUR INSTRUMENT PANEL indicating that the setting had been selected. Press the • Front ParkSense® Chime Volume back arrow button on the touchscreen to return to the The Front ParkSense® Chime Volume settings can be previous menu. For further information, refer to “For- selected from the Driver Information Display (DID) or ward Collision Warning (FCW) With Mitigation”...
Page 331 UNDERSTANDING YOUR INSTRUMENT PANEL 329 “ParkSense® Rear Chime Volume” button on the touch- • Blind Spot Alert screen, until a check-mark appears next to setting, indi- When this feature is selected, the Blind Spot Alert feature cating that the setting had been selected. Press the back Provides alerts, visual and/or audible, to indicate objects arrow button on the touchscreen to return to the previous in your blind spot.
Page 332 330 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: If your vehicle has experienced any damage in next to setting, indicating that the setting had been the area where the sensor is located, even if the fascia is selected. Press the back arrow button on the touchscreen not damaged, the sensor may have become misaligned.
Page 333 UNDERSTANDING YOUR INSTRUMENT PANEL 331 “Parkview Backup camera Delay” button on the touch- setting had been selected. Press the back arrow button on screen to turn the ParkView® Delay ON or OFF. the touchscreen to return to the previous menu. •...
Page 334 332 UNDERSTANDING YOUR INSTRUMENT PANEL are unlocked with the Remote Keyless Entry (RKE) • Auto Dim High Beams — If Equipped transmitter. To change the Illuminated Approach status, When this feature is selected, the high beam headlights press the “+” or “–” button on the touchscreen to select will deactivate automatically under certain conditions.
Page 335 UNDERSTANDING YOUR INSTRUMENT PANEL 333 back arrow button on the touchscreen to return to the Doors & Locks previous menu, or push the back button on the faceplate. After pressing the Doors & Locks button on the touch- • Flash Lights With Lock screen the following settings will be available.
Page 336 334 UNDERSTANDING YOUR INSTRUMENT PANEL button on the touchscreen, until a check-mark appears • Sound Horn With Lock next to setting, showing that setting has been selected. When this feature is selected, the horn will sound when Press the back arrow button on the touchscreen to return the door locks are activated.
Page 337 UNDERSTANDING YOUR INSTRUMENT PANEL 335 • 1st Press Of Key Fob Unlocks once the driver door is opened, the interior door lock/ unlock switch can be used to unlock all doors (or use When Driver Door is selected with 1st Press Of Key Fob RKE transmitter).
Page 338 336 UNDERSTANDING YOUR INSTRUMENT PANEL mirrors, steering column position and radio station pre- a check-mark appears next to setting, showing that sets) to enhance driver mobility when entering and setting has been selected. Press the back arrow button on exiting the vehicle. To make your selection, press the the touchscreen to return to the previous menu, or push “Personal Settings Linked to Key Fob”...
Page 339 UNDERSTANDING YOUR INSTRUMENT PANEL 337 Starts” until a check-mark appears next to setting, show- • Engine Off Power Delay ing that setting has been selected. Press the back arrow/ When this feature is selected, the power window Done button on the touchscreen to return to the previous switches, radio, Uconnect®...
Page 340 338 UNDERSTANDING YOUR INSTRUMENT PANEL Delay status press the “+” or “-” button on the touch- the scale between the “+” and “–” buttons on the screen to select your desired time interval. Press the back touchscreen. Press the back arrow button on the touch- arrow button on the touchscreen to return to the previous screen to return to the previous menu.
Page 341 UNDERSTANDING YOUR INSTRUMENT PANEL 339 button on the touchscreen, select “On” or “Off.” Press the Phone/Bluetooth® back arrow button on the touchscreen to return to the After pressing the “Phone/Bluetooth®” button on the previous menu. touchscreen the following settings will be available: •...
Page 342 340 UNDERSTANDING YOUR INSTRUMENT PANEL SiriusXM Setup — If Equipped Press the “Subscription Info” button on the touchscreen to access the Subscription Information screen. After pressing the “SiriusXM Setup” button on the touch- screen, the following settings will be available: Write down the SIRIUS ID numbers for your receiver.
Page 343: Srt Performance Pages
UNDERSTANDING YOUR INSTRUMENT PANEL 341 select “OK” to restore, or “Cancel” to exit. Once the System Information settings are restored, a pop up appears stating settings After pressing the “System Information” button on the reset to default. touchscreen the following settings will be available: Clear Personal Data •...
Page 344 342 UNDERSTANDING YOUR INSTRUMENT PANEL • 1/8 Mile (200 meter) Timer WARNING! • 1/4 Mile (400 meter) Timer Measurement of vehicle statistics with the SRT Per- • Braking Distance formance Pages is intended for off-highway or off- road use only and should not be done on any public •...
Page 345 UNDERSTANDING YOUR INSTRUMENT PANEL 343 • Last • Press the “Uconnect” button to save the runs to the Owner web page. Pressing the “Last” button displays the last recorded run of performance timers. • Press the “Cancel” button to view the last timer “Ticket.”...
Page 346 344 UNDERSTANDING YOUR INSTRUMENT PANEL • Brake Distance G-Force When selected, this screen displays all four G-Force Displays the distance it takes the vehicle to make a full values (two lateral and two longitudinal) as well as stop. Contains current and last data for distance and start steering angle.
Page 347: Uconnect® Radios - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 345 Gauges 2 Uconnect® RADIOS — IF EQUIPPED When selected, this screen displays the following values: For detailed information about your Uconnect® radio, refer to your Uconnect® Supplement Manual. • Coolant Temperature Displays the actual coolant temperature. iPod®/USB/MP3 CONTROL —...
Page 348: Getting Started
346 UNDERSTANDING YOUR INSTRUMENT PANEL Uconnect® REAR SEAT ENTERTAINMENT SYSTEM — IF EQUIPPED Your Rear Seat Entertainment System is designed to give your family years of enjoyment. You can play your favorite CDs, DVDs or Blu-ray™ Discs, listen to audio over the wireless headphones, or plug and play a variety of standard video games or audio devices.
Page 349 UNDERSTANDING YOUR INSTRUMENT PANEL 347 • Turn on the Rear Seat Entertainment system by push- • With the Dual Video Screen System, Channel 1 (Rear 1) ing the Power button on the remote control. on the Remote Control and Headphones refers to Screen 1 (driver’s side) and Channel 2 (Rear 2) on the •...
Page 350: Dual Video Screen
348 UNDERSTANDING YOUR INSTRUMENT PANEL Dual Video Screen NOTE: Typically there are two different ways to operate the features of the Rear Seat Entertainment System. • The Remote Control • The Touchscreen Radio (If Equipped) Blu-ray™ Disc Player Play A Blu-ray™ Disc The Blu-ray™...
Page 351 UNDERSTANDING YOUR INSTRUMENT PANEL 349 Using The Touchscreen Radio Blu-ray™ Disc Player Location To view a Blu-ray™ insert the disc into the Blu-ray™ Disc Rear Media Control Screen Player. Playback will begin automatically after the Blu- 1. RSE Channel 1 Mode ray™...
Page 352 350 UNDERSTANDING YOUR INSTRUMENT PANEL is not highlighted select button to access controls for 6. Radio Full Screen Mode Screen 1/Channel 1 source. Select this button to change to Full Screen Mode. 2. RSE Power 7. Cabin Audio Mode Press to turn RSE On/Off. Select this button to change the cabin audio to the rear entertainment source currently shown on the rear media 3.
Page 353: Play Video Games
UNDERSTANDING YOUR INSTRUMENT PANEL 351 Using The Remote Control • Select an audio channel (Rear 1 for driver’s side rear screen and Rear 2 for passenger’s side rear screen), then press the source key and using the up and down arrows, highlight disc from the menu and press the OK button.
Page 354: Play A Dvd/Blu-Ray™ Disc Using The Touchscreen Radio
352 UNDERSTANDING YOUR INSTRUMENT PANEL When connecting an external source to the AUX/HDMI radio automatically selects the appropriate mode after input, ensure to follow the standard color coding for the the disc is recognized and displays the menu screen or audio/video jacks: starts playing the first track.
Page 355 UNDERSTANDING YOUR INSTRUMENT PANEL 353 2. Press the Rear Media button to display the Rear Media Control screen. Select DISC Mode On The Rear Seat Entertainment Screen Using The Touchscreen Radio Controls Rear Media Control Screen 3. Press the 1 or 2 buttons on the touchscreen, the select 1.
Page 356: Important Notes For Dual Video Screen System
354 UNDERSTANDING YOUR INSTRUMENT PANEL Important Notes For Dual Video Screen System • The Rear Seat Entertainment System is able to transmit two channels of stereo audio and video simultane- ously. • The Blu-ray™ Disc Player can play CDs, DVDs and Blu-ray™...
Page 357: Blu-Ray™ Disc Player Remote Control - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 355 audio while the screen is closed, push the Power Blu-ray™ Disc Player Remote Control — If button to turn the headphone transmitter on. Equipped 2. Channel Selector Indicators — When a button is pushed, the currently affected channel or channel button is illuminated momentarily.
Page 358: Replacing The Remote Control Batteries
356 UNDERSTANDING YOUR INSTRUMENT PANEL — Push and hold to fast forward through the 15. BACK — Push to exit out of menus or return to current audio track or video chapter. source selection screen. (Play/Pause) — Begin/resume or pause disc —...
Page 359: Headphones Operation
UNDERSTANDING YOUR INSTRUMENT PANEL 357 Headphones Operation The headphones receive two separate channels of audio using an infrared transmitter from the video screen. If no audio is heard after increasing the volume control, verify that the screen is turned on, the channel is not muted and the headphone channel selector switch is on the desired channel.
Page 360: Controls
358 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Controls • When both the headphone and the remote control The headphone power indicator and controls are located channel selector switches are on Channel 1, the on the right ear cup. Remote is controlling Channel 1 and the headphones NOTE: The rear video system must be turned on before are tuned to the audio on Channel 1.
Page 361: Replacing The Headphone Batteries
UNDERSTANDING YOUR INSTRUMENT PANEL 359 5. To cancel out of the Mode Selection menu, push the particular Unwired Technology LLC ( Unwired ) wire- BACK button on the remote control. less headphone ( Product ). The warranty is not transfer- able.
Page 362 360 UNDERSTANDING YOUR INSTRUMENT PANEL FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, If you have any questions or comments regarding your INCIDENTAL, CONSEQUENTIAL, EXEMPLARY, PU- Unwired® wireless headphones, please phone 1-888-293- NITIVE OR OTHER DAMAGES OF ANY KIND OR 3332 or email customersupport@unwiredtechnology.com. NATURE WHATSOEVER.
Page 363 UNDERSTANDING YOUR INSTRUMENT PANEL 361 Display Settings Display Settings menu. These settings control the appear- ance of the video on the screen. The factory default settings are already set for optimum viewing, so there is no need to change these settings under normal circum- stances.
Page 364 362 UNDERSTANDING YOUR INSTRUMENT PANEL Listening To Audio With The Screen Closed the remote control’s power button to turn audio on. If audio is still not heard, check that fully charged batteries To listen to only audio portion of the channel with the are installed in the headphones.
Page 365 UNDERSTANDING YOUR INSTRUMENT PANEL 363 match in order for the disc to play. If the region code for also play DVD-Video content recorded to a DVD-R or the DVD disc does not match the region code for the DVD-RW disc. DVD-ROM discs (either pressed or re- player, the disc will not play.
Page 366 364 UNDERSTANDING YOUR INSTRUMENT PANEL • For CD Data (or CD-ROM) discs, always use the Compressed Audio Files (MP3 and WMA) ISO-9660 (Level 1 or Level 2), Joliet, or Romeo format. The Blu-ray™ Disc player is capable of playing MP3 Other formats (such as UDF, HFS, or others) are not (MPEG-1 Audio Layer 3) and WMA (Windows Media supported.
Page 367 UNDERSTANDING YOUR INSTRUMENT PANEL 365 • Other compression formats such as AAC, MP3 Pro, Radio displays. A dirty, damaged, or incompatible disc Ogg Vorbis, and ATRAC3 will not play. The Blu-ray™ format are all potential causes for a Disc Error message. player will automatically skip the file and begin play- If a disc has a damaged track which results in audible or ing the next available file.
Page 368: Steering Wheel Audio Controls - If Equipped
366 UNDERSTANDING YOUR INSTRUMENT PANEL Product Agreement General Information This product incorporates copyright protection technol- This system complies with Part 15 of the FCC Operation ogy that is protected by U.S. patents and other intellec- is subject to the following two conditions: tual property rights.
Page 369: Radio Operation
UNDERSTANDING YOUR INSTRUMENT PANEL 367 Pushing the center button will make the radio switch between the various modes available (AM/FM/SXM/ CD/AUX/VES, etc.). The left-hand control is a rocker-type switch with a push-button in the center. The function of the left-hand control is different depending on which mode you are in.
Page 370: Cd Player
368 UNDERSTANDING YOUR INSTRUMENT PANEL 3. Do not apply paper or tape to the disc; avoid scratch- CD Player ing the disc. Pushing the top of the switch once will go to the next track on the CD. Pushing the bottom of the switch once 4.
Page 371: Radio Operation And Mobile Phones
UNDERSTANDING YOUR INSTRUMENT PANEL 369 Nevertheless, the wireless radio shall be used in such a RADIO OPERATION AND MOBILE PHONES manner that the radio is 20 cm or further from the human Under certain conditions, the mobile phone being on in body.
Page 372 370 UNDERSTANDING YOUR INSTRUMENT PANEL This device complies with Part 15 of the FCC Rules and NOTE: with Industry Canada license-exempt RSS standard(s). • This equipment has been tested and found to comply Operation is subject to the following two conditions: with the limits for a Class B digital device, pursuant to 1.
Page 373: Climate Controls
UNDERSTANDING YOUR INSTRUMENT PANEL 371 • Consult the dealer or an experienced radio technician for help. CLIMATE CONTROLS The air conditioning and heating system is designed to make you comfortable in all types of weather. This system can be operated through either the controls on the instrument panel or through the Uconnect®...
Page 374 372 UNDERSTANDING YOUR INSTRUMENT PANEL Buttons On The Touchscreen The buttons on the touchscreen are accessible on the Uconnect® system screen. Uconnect® 8.4 Automatic Temperature Controls — Buttons On The Touchscreen Button Descriptions (Applies To Both The Buttons On The Faceplate And The Buttons On The Touchscreen) Uconnect®...
Page 375 UNDERSTANDING YOUR INSTRUMENT PANEL 373 this function again will cause the MAX A/C operation to 5. Front Defrost Button switch into manual mode and the MAX A/C indicator Press and release to change the current airflow setting to will turn off. Defrost mode.
Page 376 374 UNDERSTANDING YOUR INSTRUMENT PANEL slide the temperature bar towards the red arrow button CAUTION! on the touchscreen for warmer temperature settings. Failure to follow these cautions can cause damage to NOTE: Pressing this button while in Sync mode will the heating elements: automatically exit Sync.
Page 377 UNDERSTANDING YOUR INSTRUMENT PANEL 375 the passenger temperature setting with the driver tem- Button On The Touchscreen perature setting. Changing the passenger temperature Use the small blower icon to reduce the blower setting setting while in Sync will automatically exit this feature. and the large blower icon to increase the blower setting.
Page 378 376 UNDERSTANDING YOUR INSTRUMENT PANEL • Bi-Level Mode 12. Climate Control OFF Button Air comes from the instrument panel outlets and Press and release this button to turn the Climate Control floor outlets. A slight amount of air is directed ON/OFF.
Page 379: Climate Control Functions
UNDERSTANDING YOUR INSTRUMENT PANEL 377 the temperature bar towards the red arrow button on the cool dehumidified air will flow through the outlets into touchscreen for warmer temperature settings. the cabin. For improved fuel economy, press the A/C button to turn off the air conditioning and manually NOTE: In Sync mode, this button will also automatically adjust the blower and airflow mode settings.
Page 380: Automatic Temperature Control (Atc)
378 UNDERSTANDING YOUR INSTRUMENT PANEL MAX A/C selected. Press the button a second time to turn off the Recirculation mode and allow outside air into the vehicle. MAX A/C sets the control for maximum cooling perfor- mance. NOTE: In cold weather, use of Recirculation mode may lead to excessive window fogging.
Page 381 UNDERSTANDING YOUR INSTRUMENT PANEL 379 2. Next, adjust the temperature you would like the • The temperature can be displayed in U.S. or Metric system to maintain by adjusting the driver and pas- units selecting Uconnect® customer- senger temperature buttons on the faceplate or but- programmable feature.
Page 382: Operating Tips
380 UNDERSTANDING YOUR INSTRUMENT PANEL The operator can also select the direction of the airflow coolant that meets the requirements of Chrysler Material by selecting one of the available mode settings. A/C Standard MS-12106 and 50% water is recommended. operation and Recirculation control can also be manually Refer to “Maintenance Procedures”...
Page 383 UNDERSTANDING YOUR INSTRUMENT PANEL 381 Window Fogging eliminate window fogging on the front windshield. When this occurs, recirculation will be unavailable. Interior fogging on the windshield can be quickly re- moved by turning the mode selector to Defrost. The Outside Air Intake Defrost/Floor mode can be used to maintain a clear Make sure the air intake, located directly in front of the windshield and provide sufficient heating.
Page 384 382 UNDERSTANDING YOUR INSTRUMENT PANEL Control Setting Suggestions For Various Weather Conditions...
Page 385: Uconnect® Voice Recognition Quick Tips
UNDERSTANDING YOUR INSTRUMENT PANEL 383 Uconnect® VOICE RECOGNITION QUICK TIPS Introducing Uconnect® Start using Uconnect® Voice Recognition with these helpful quick tips. It provides the key Voice Commands and tips you need to know to control your Uconnect® 5.0 or 8.4A/8.4AN system. Uconnect®...
Page 386: Get Started
384 UNDERSTANDING YOUR INSTRUMENT PANEL 3. Speak clearly at a normal pace and volume while Get Started facing straight ahead. The microphone is positioned All you need to control your Uconnect® system with on the rearview mirror and aimed at the driver. your voice are the buttons on your steering wheel.
Page 387: Basic Voice Commands
UNDERSTANDING YOUR INSTRUMENT PANEL 385 Basic Voice Commands The basic Voice Commands below can be given at any point while using your Uconnect® system. Push the VR button . After the beep, say: • Cancel to stop a current voice session •...
Page 388: Radio
386 UNDERSTANDING YOUR INSTRUMENT PANEL Press the VR button . After the beep, say: • Tune to ninety-five-point-five FM • Tune to Satellite Channel Hits 1 TIP: At any time, if you are not sure of what to say or want to learn a Voice Command, press the VR button and say “Help.”...
Page 389: Media
UNDERSTANDING YOUR INSTRUMENT PANEL 387 Push the VR button . After the beep, say one of the following commands and follow the prompts to switch your media source or choose an artist. • Change source to Bluetooth® • Change source to iPod® •...
Page 390: Phone
388 UNDERSTANDING YOUR INSTRUMENT PANEL Push the Phone button . After the beep, say one of the following commands: • Call John Smith • Dial 123-456-7890 and follow the system prompts • Redial (call previous outgoing phone number) • Call back (call previous incoming phone number) TIP: When providing a Voice Command, push the Phone button...
Page 391: Voice Text Reply
UNDERSTANDING YOUR INSTRUMENT PANEL 389 1. Once an incoming text message is read to you, push the Phone button . After the beep, say: “Reply” 2. Listen to the Uconnect® prompts. After the beep, repeat one of the pre-defined messages and follow the system prompts.
Page 392: Climate (8.4A/8.4An)
390 UNDERSTANDING YOUR INSTRUMENT PANEL TIP: Your mobile phone must have the full implementa- TIP: Voice Command for Climate may only be used to tion of the Message Access Profile (MAP) to take advan- adjust the interior temperature of your vehicle. Voice tage of this feature.
Page 393: Navigation (8.4A/8.4An)
UNDERSTANDING YOUR INSTRUMENT PANEL 391 Navigation (8.4A/8.4AN) The Uconnect® navigation feature helps you save time and become more productive when you know exactly how to get to where you want to go. (Navigation is optional on the Uconnect® 8.4A system. See your dealer to activate navigation at any time.) 1.
Page 394: Uconnect® Access* (8.4A/8.4An)
392 UNDERSTANDING YOUR INSTRUMENT PANEL Remote Horn and Lights Uconnect® Access* (8.4A/8.4AN) An included trial and/or subscription is required to take Yelp® Search advantage of the Uconnect® Access services in the next Voice Texting section of this guide. To register with Uconnect® Access, Roadside Assistance Call press the Apps button on the 8.4-inch touchscreen to get started.
Page 395: Mobile App (8.4A/8.4An)
UNDERSTANDING YOUR INSTRUMENT PANEL 393 4. Check your personal inbox for an email from Mobile App (8.4A/8.4AN) Uconnect® Access. Securely link your mobile device to your vehicle with the Uconnect® Access App. Once you have downloaded the 5. Click on the link inside the email within 72 hours and App, you may start your vehicle or lock it from virtually complete the easy online registration process to create any distance.
Page 396: Voice Texting (8.4A/8.4An)
394 UNDERSTANDING YOUR INSTRUMENT PANEL Download the Uconnect® Access App to a compatible 2. Listen to the prompt. After the beep, dictate the Apple® or Android® mobile devices. All you need to do message you would like to send. Wait for Uconnect® to process your message.
Page 397: Yelp® (8.4A/8.4An)
UNDERSTANDING YOUR INSTRUMENT PANEL 395 TIP: Once you perform a search, you can reorganize the Yelp® (8.4A/8.4AN) results by selecting either the Best Match, Rating or Once registered with Uconnect® Access, you can use Distance tab on the top of the touchscreen display. your voice to search for the most popular places or things around you.
Page 398: Siriusxm Travel Link™ (8.4A/8.4An)
396 UNDERSTANDING YOUR INSTRUMENT PANEL SiriusXM Travel Link™ (8.4A/8.4AN) Need to find a gas station, view local movie listings, check a sports score or the 5 - day weather forecast? SiriusXM Travel Link™ is a suite of services that brings a wealth of information right to your Uconnect®...
Page 399: Additional Information
UNDERSTANDING YOUR INSTRUMENT PANEL 397 • Canadian residents call 1-800-465-2001 (English) or Additional Information 1-800-387-9983 (French) © 2014 Chrysler Group LLC. All rights reserved. Mopar and Uconnect are registered trademarks and Mopar Mon. – Fri., 7:00 am – 12:00 am, ET Owner Connect is a trademark of Chrysler Group LLC.
Page 401 STARTING AND OPERATING CONTENTS STARTING PROCEDURES ....403 ▫ Brake/Transmission Shift Interlock System . . .410 ▫ Automatic Transmission ....403 ▫...
Page 402 400 STARTING AND OPERATING ▫ Flowing/Rising Water ....425 ▫ Trailer Sway Control (TSC) ....440 POWER STEERING .
Page 403 STARTING AND OPERATING 401 ▫ Spare Tires — If Equipped ....458 ▫ 6.4L Engine ......474 ▫...
Page 404 402 STARTING AND OPERATING ▫ Common Towing Definitions ... . .485 ▫ Towing Requirements ....492 ▫...
Page 405: Starting Procedures
STARTING AND OPERATING 403 STARTING PROCEDURES WARNING! (Continued) Before starting your vehicle, adjust your seat, adjust the • Do not leave the Key Fob in or near the vehicle (or inside and outside mirrors, fasten your seat belt, and if in a location accessible to children), and do not present, instruct all other occupants to buckle their seat leave the ignition (of a vehicle equipped with...
Page 406: Keyless Enter-N-Go
404 STARTING AND OPERATING Keyless Enter-N-Go™ CAUTION! Damage to the transmission may occur if the follow- This feature allows the driver to oper- ing precautions are not observed: ate the ignition switch with the push • Do not shift from REVERSE, PARK, or NEUTRAL of a button, as long as the Remote into any forward gear when the engine is above Start/Keyless Enter-N-Go™...
Page 407 STARTING AND OPERATING 405 4. If you wish to stop the cranking of the engine prior to 3. If the shift lever/gear selector is not in PARK, the the engine starting, push the button again. ENGINE START/STOP button must be held for two seconds or three short pushes in a row with the vehicle NOTE: Normal starting of either a cold or a warm engine speed above 5 mph (8 km/h) before the engine will...
Page 408: Extreme Cold Weather
406 STARTING AND OPERATING ENGINE START/STOP Button Functions — With • Push the ENGINE START/STOP button a third time to Driver’s Foot OFF The Brake Pedal (In PARK Or return the ignition to the OFF position (DID will NEUTRAL Position) display “OFF”).
Page 409 STARTING AND OPERATING 407 Clearing A Flooded Engine (Using ENGINE WARNING! (Continued) START/STOP Button) • Do not attempt to push or tow your vehicle to get it If the engine fails to start after you have followed the started. Vehicles equipped with an automatic trans- “Normal Starting”...
Page 410: After Starting
408 STARTING AND OPERATING After Starting WARNING! (Continued) The idle speed is controlled automatically and it will • Unintended movement of a vehicle could injure decrease as the engine warms up. those in or near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is AUTOMATIC TRANSMISSION running.
Page 411: Key Ignition Park Interlock
STARTING AND OPERATING 409 WARNING! (Continued) CAUTION! • Never leave children alone in a vehicle, or with Damage to the transmission may occur if the follow- access to an unlocked vehicle. Allowing children to ing precautions are not observed: be in a vehicle unattended is dangerous for a •...
Page 412: Brake/Transmission Shift Interlock System
410 STARTING AND OPERATING the transmission in PARK. This system also locks the transmission in PARK whenever the ignition switch is in the OFF position. Brake/Transmission Shift Interlock System This vehicle is equipped with a Brake Transmission Shift Interlock system (BTSI) that holds the shift lever in PARK unless the brakes are applied.
Page 413: Eight-Speed Automatic Transmission
STARTING AND OPERATING 411 • The transmission will launch (from a stop) in second This system relies on four microphones embedded in the gear. headliner to detect the exhaust drone and prompt an onboard frequency generator to create counteracting • The torque converter clutch may engage at lower sound waves through the audio system’s speakers and engine speeds and remain on longer.
Page 414 412 STARTING AND OPERATING speeds (refer to “Brake/Transmission Shift Interlock Sys- The transmission shift lever provides PARK, REVERSE, tem” in this section). To shift past multiple gear ranges at NEUTRAL, DRIVE and SPORT shift positions. Once in once (such as PARK to DRIVE), move the lever past the the DRIVE range, tapping the shift lever rearward will first (or second) detent.
Page 415 STARTING AND OPERATING 413 NOTE: After selecting any gear range, wait a moment to allow the selected gear to engage before accelerating. This is especially important when the engine is cold. PARK (P) This range supplements the parking brake by locking the transmission.
Page 416 414 STARTING AND OPERATING WARNING! WARNING! (Continued) • It is dangerous to shift out of PARK or NEUTRAL • Never use the PARK position as a substitute for the if the engine speed is higher than idle speed. If parking brake. Always apply the parking brake your foot is not firmly pressing the brake pedal, the fully when parked to guard against vehicle move- vehicle could accelerate quickly forward or in re-...
Page 417 STARTING AND OPERATING 415 WARNING! (Continued) WARNING! (Continued) • Unintended movement of a vehicle could injure • Never leave children alone in a vehicle, or with those in or near the vehicle. As with all vehicles, access to an unlocked vehicle. Allowing children to you should never exit a vehicle while the engine is be in a vehicle unattended is dangerous for a running.
Page 418 416 STARTING AND OPERATING • With brake pedal released, look at the transmission CAUTION! gear position display and verify that it indicates the PARK position. • DO NOT race the engine when shifting from PARK or NEUTRAL into another gear range, as this REVERSE (R) can damage the drivetrain.
Page 419 STARTING AND OPERATING 417 DRIVE (D) WARNING! This range should be used for most city and highway Do not coast in NEUTRAL and never turn off the driving. It provides the smoothest upshifts and down- ignition to coast down a hill. These are unsafe shifts, and the best fuel economy.
Page 420 418 STARTING AND OPERATING During extremely cold temperatures (-22°F [-30°C] or operate only in certain gears, or may not shift at all. below), transmission operation may be modified depend- Vehicle performance may be severely degraded and the ing on engine and transmission temperature as well as engine may stall.
Page 421: Paddle Shift Mode
STARTING AND OPERATING 419 2. Shift the transmission into PARK, if possible. If not, When To Use TOW Mode shift the transmission to NEUTRAL. When driving in hilly areas, towing a trailer, carrying a heavy load, etc., and frequent transmission shifting oc- 3.
Page 422: Operation
420 STARTING AND OPERATING during passing, city driving, cold slippery conditions, result. It will remain in the selected gear until another mountain driving, trailer towing, and many other situa- upshift or downshift is chosen, except as described tions. below. • Normally, in Paddle Shift mode, the transmission will Operation automatically shift up when maximum engine speed is When the transmission is in DRIVE or SPORT mode, it...
Page 423 STARTING AND OPERATING 421 • You can start out, from a stop, in first or second gear. To disengage Paddle Shift mode, press and hold the (+) Tapping (+) (at a stop) will allow starting in second shift paddle until “D” or “S” is once again displayed in gear.
Page 424: Selec-Track® - If Equipped
422 STARTING AND OPERATING Selec-Track™ consists of the following positions: SELEC-TRACK® — IF EQUIPPED • Sport – Dry weather, on-road calibration. Performance Description based tuning that provides a rear wheel drive feel but Selec-Track™ combines the capabilities of the vehicle with improved handling and acceleration over a two- control systems, along with driver input, to provide the wheel drive vehicle.
Page 425: Active Damping System
STARTING AND OPERATING 423 use second gear (rather than first gear) during • The customer has the option of going to FULL OFF launches, to minimize wheel slippage. This feature will with no interaction from the ESC System. The active reset to AUTO upon an ignition cycle.
Page 426: Launch Mode - If Equipped
424 STARTING AND OPERATING • Firm Mode (Available in terrain positions SPORT and NOTE: If the cluster launch DID message indicates all TOW) — Provides a firm suspension for better han- conditions are correct for launch and the throttle is dling.
Page 427: Driving Through Water
STARTING AND OPERATING 425 • Launch Mode is not available until the 500 mile Flowing/Rising Water (805 km) break-in has been achieved. WARNING! DRIVING THROUGH WATER Do not drive on, or cross, a road or a path where Driving through water more than a few inches/ water is flowing and/or rising (as in storm run-off).
Page 428 426 STARTING AND OPERATING WARNING! CAUTION! • Driving through standing water limits your vehi- • Always check the depth of the standing water cle’s traction capabilities. Do not exceed 5 mph before driving through it. Never drive through (8 km/h) when driving through standing water. standing water that is deeper than the bottom of •...
Page 429: Power Steering
STARTING AND OPERATING 427 POWER STEERING CAUTION! (Continued) The standard power steering system will give you good • Driving through standing water may cause damage vehicle response and increased ease of maneuverability to your vehicle’s drivetrain components. Always in tight spaces. The system will provide mechanical inspect your vehicle’s fluids (i.e., engine oil, trans- steering capability if power assist is lost.
Page 430: Fuel Saver Technology - If Equipped
428 STARTING AND OPERATING • Upon initial start-up in cold weather, the power steer- NOTE: This system may take some time to return to full ing pump may make noise for a short amount of time. functionality after a battery disconnect. This is due to the cold, thick fluid in the steering PARKING BRAKE system.
Page 431 STARTING AND OPERATING 429 NOTE: • When the parking brake is applied and the transmis- sion is placed in gear, the “Brake” Warning Light will flash. If vehicle speed is detected, a chime will sound to alert the driver. Fully release the parking brake before attempting to move the vehicle.
Page 432 430 STARTING AND OPERATING WARNING! WARNING! (Continued) • When leaving the vehicle, always make sure the • Never use the PARK position as a substitute for the keyless ignition node is in the “OFF” mode, re- parking brake. Always apply the parking brake move the Key Fob from the vehicle and lock the fully when parked to guard against vehicle move- vehicle.
Page 433: Brake System
STARTING AND OPERATING 431 BRAKE SYSTEM WARNING! (Continued) Your vehicle is equipped with dual hydraulic brake • Always fully apply the parking brake when leav- systems. If either of the two hydraulic systems loses ing your vehicle, or it may roll and cause damage or normal capability, the remaining system will still func- injury.
Page 434: Electronic Brake Control System
432 STARTING AND OPERATING ELECTRONIC BRAKE CONTROL SYSTEM WARNING! Your vehicle is equipped with an advanced electronic The ABS cannot prevent the natural laws of physics brake control system that includes the Anti-Lock Brake from acting on the vehicle, nor can it increase the System (ABS), Traction Control System (TCS), Brake traction afforded by prevailing road conditions.
Page 435: Brake Assist System (Bas)
STARTING AND OPERATING 433 A feature of the TCS system, Brake Limited Differential quickly results in the best BAS assistance. To receive the (BLD), functions similar to a limited-slip differential and benefit of the system, you must apply continuous brak- controls the wheel spin across a driven axle.
Page 436: Electronic Roll Mitigation (Erm)
434 STARTING AND OPERATING Electronic Roll Mitigation (ERM) WARNING! This system anticipates the potential for wheel lift by Many factors, such as vehicle loading, road condi- monitoring the driver’s steering wheel input and the tions, and driving conditions, influence the chance speed of the vehicle.
Page 437 STARTING AND OPERATING 435 counteracting the oversteer or understeer condition. En- Activation/Malfunction Indicator Light” begins to flash gine power may also be reduced to help the vehicle during acceleration, ease up on the accelerator and apply maintain the desired path. as little throttle as possible.
Page 438 436 STARTING AND OPERATING The ESC system has three available operating modes. again, momentarily press the “ESC OFF” switch. This will restore the normal “ESC On” mode of operation. This is the normal operating mode for ESC. Whenever the vehicle is started, the ESC system will be in this “On” mode.
Page 439 STARTING AND OPERATING 437 NOTE: To improve the vehicle’s traction when driving WARNING! (Continued) with snow chains, or starting off in deep snow, sand, or • Trailer Sway Control (TSC) is disabled when the gravel, it may be desirable to switch to the “Partial Off” ESC system is in the Partial Off mode.
Page 440 438 STARTING AND OPERATING “Understanding Your Instrument Panel” for further in- NOTE: When the ESC is switched OFF, a feature of the system remains active. This feature controls wheel spin formation. To turn ESC ON again, momentarily press the across an axle quite similarly to a limited slip differential. If “ESC Off”...
Page 441: Esc Activation/Malfunction Indicator Light And Esc Off Indicator Light
STARTING AND OPERATING 439 flashes when TCS is active. If the “ESC Activation/ ESC Activation/Malfunction Indicator Light And Malfunction Indicator Light” begins to flash during ac- ESC OFF Indicator Light celeration, ease up on the accelerator and apply as little throttle as possible.
Page 442: Trailer Sway Control (Tsc)
440 STARTING AND OPERATING • The ESC system will make buzzing or clicking sounds recommendations. Refer to “Trailer Towing” in this sec- when it is active. This is normal; the sounds will stop tion for further information. When TSC is functioning, when ESC becomes inactive following the maneuver the “ESC Activation/Malfunction Indicator Light”...
Page 443: Tire Safety Information
STARTING AND OPERATING 441 NOTE: TIRE SAFETY INFORMATION Tire Markings • P (Passenger) — Metric tire sizing is based on U.S. design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designa- tion. Example: P215/65R15 95H. •...
Page 444 442 STARTING AND OPERATING • Temporary spare tires are designed for temporary • High flotation tire sizing is based on U.S. design emergency use only. Temporary high pressure com- standards and it begins with the tire diameter molded pact spare tires have the letter “T” or “S” molded into into the sidewall.
Page 445 STARTING AND OPERATING 443 EXAMPLE: R = Construction code – R means radial construction, or – D means diagonal or bias construction 15, 16, 18 = Rim diameter in inches (in) Service Description: 95 = Load Index – A numerical code associated with the maximum load a tire can carry H = Speed Symbol –...
Page 446: Tire Identification Number (Tin)
444 STARTING AND OPERATING EXAMPLE: Load Identification: Absence of the following load identification symbols on the sidewall of the tire indicates a Standard Load (SL) tire: • XL = Extra load (or reinforced) tire, or • LL = Light load tire or •...
Page 447 STARTING AND OPERATING 445 EXAMPLE: DOT MA L9 ABCD 0301 DOT = Department of Transportation – This symbol certifies that the tire is in compliance with the U.S. Department of Transportation tire safety standards and is approved for highway use MA = Code representing the tire manufacturing location (two digits) L9 = Code representing the tire size (two digits) ABCD = Code used by the tire manufacturer (one to four digits)
Page 448: Tire Terminology And Definitions
446 STARTING AND OPERATING Tire Terminology And Definitions Term Definition B-Pillar The vehicle B-Pillar is the structural member of the body located behind the front door. Cold Tire Inflation Pressure Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after sitting for a minimum of three hours.
Page 449: Tire Loading And Tire Pressure
STARTING AND OPERATING 447 Tire Loading And Tire Pressure Tire And Loading Information Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar or the rear edge of the driver’s side door. Example Tire Placard Location (Door)
Page 450 448 STARTING AND OPERATING Tire And Loading Information Placard Example Tire Placard Location (B-Pillar) Tire And Loading Information Placard This placard tells you important information about the: 1. Number of people that can be carried in the vehicle. 2. Total weight your vehicle can carry.
Page 451 STARTING AND OPERATING 449 3. Tire size designed for your vehicle. To determine the maximum loading conditions of your vehicle, locate the statement “The combined weight of 4. Cold tire inflation pressures for the front, rear, and occupants and cargo should never exceed XXX lbs or spare tires.
Page 452 450 STARTING AND OPERATING 4. The resulting figure equals the available amount of NOTE: cargo and luggage load capacity. For example, if • If your vehicle will be towing a trailer, load from your “XXX” amount equals 1,400 lbs (635 kg) and there will trailer will be transferred to your vehicle.
Page 453 STARTING AND OPERATING 451...
Page 454: Tires - General Information
452 STARTING AND OPERATING Safety WARNING! WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and • Improperly inflated tires are dangerous and can increase your stopping distance. Use tires of the cause collisions. recommended load capacity for your vehicle.
Page 455: Tire Inflation Pressures
STARTING AND OPERATING 453 Economy WARNING! (Continued) Under-inflated tires will increase tire rolling resistance • Unequal tire pressures from one side of the vehicle resulting in higher fuel consumption. to the other can cause the vehicle to drift to the right or left.
Page 456 454 STARTING AND OPERATING At least once a month: The cold tire inflation pressure must not exceed the maximum inflation pressure molded into the tire side- • Check and adjust tire pressure with a good quality wall. pocket-type pressure gauge. Do not make a visual judge- Check tire pressures more often if subject to a wide range ment when determining proper inflation.
Page 457: Tire Pressures For High Speed Operation
STARTING AND OPERATING 455 Tire Pressures For High Speed Operation Radial Ply Tires The manufacturer advocates driving at safe speeds and WARNING! within posted speed limits. Where speed limits or condi- tions are such that the vehicle can be driven at high Combining radial ply tires with other types of tires speeds, maintaining correct tire inflation pressure is very on your vehicle will cause your vehicle to handle...
Page 458: Tire Types
456 STARTING AND OPERATING Consult an authorized tire dealer for tire repairs and Summer Or Three Season Tires — If Equipped additional information. Summer tires provide traction in both wet and dry Damaged Run Flat tires, or Run Flat tires that have conditions, and are not intended to be driven in snow or experienced a loss of pressure should be replaced imme- on ice.
Page 459: Run Flat Tires - If Equipped
STARTING AND OPERATING 457 Snow tires generally have lower speed ratings than what WARNING! was originally equipped with your vehicle and should not be operated at sustained speeds over 75 mph Do not use summer tires in snow/ice conditions. You (120 km/h).
Page 460: Spare Tires - If Equipped
458 STARTING AND OPERATING Run Flat tire reaches the run flat mode it has limited CAUTION! driving capabilities and needs to be replaced immedi- ately. A Run Flat tire is not repairable. Because of the reduced ground clearance, do not take your vehicle through an automatic car wash with a It is not recommended driving a vehicle loaded at full compact or limited-use temporary spare installed.
Page 461 STARTING AND OPERATING 459 Compact Spare Tire — If Equipped Do not install more than one compact spare tire and wheel on the vehicle at any given time. The compact spare is for temporary emergency use only. You can identify if your vehicle is equipped with a WARNING! compact spare by looking at the spare tire description on the Tire and Loading Information Placard located on the...
Page 462: Tire Spinning
460 STARTING AND OPERATING spare tire needs to be replaced. Since it is not the same as WARNING! your original equipment tire, replace (or repair) the original equipment tire and reinstall on the vehicle at the Limited-use spares are for emergency use only. In- first opportunity.
Page 463: Tread Wear Indicators
STARTING AND OPERATING 461 Refer to “Freeing A Stuck Vehicle” in “What To Do In Emergencies” for further information. WARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause tire dam- age or failure. A tire could explode and injure some- one.
Page 464: Life Of Tire
462 STARTING AND OPERATING tread wear indicators, the tire should be replaced. Refer tread life. Rotation of these tires per the vehicle main- to “Replacement Tires” in this section for further infor- tenance schedule is highly recommended. mation. WARNING! Life Of Tire Tires and the spare tire should be replaced after six The service life of a tire is dependent upon varying years, regardless of the remaining tread.
Page 465 STARTING AND OPERATING 463 wear and correct cold tire inflation pressures. The manu- you may have on tire specifications or capability. Failure facturer strongly recommends that you use tires equiva- to use equivalent replacement tires may adversely affect lent to the originals in size, quality and performance the safety, handling, and ride of your vehicle.
Page 466: Tire Chains (Traction Devices)
464 STARTING AND OPERATING TIRE CHAINS (TRACTION DEVICES) WARNING! (Continued) Use of traction devices require sufficient tire-to-body • Never use a tire with a smaller load index or clearance. Follow these recommendations to guard capacity, other than what was originally equipped against damage.
Page 467: Tire Rotation Recommendations
STARTING AND OPERATING 465 CAUTION! CAUTION! (Continued) • Observe the traction device manufacturer’s instruc- To avoid damage to your vehicle or tires, observe the tions on the method of installation, operating following precautions: speed, and conditions for use. Always use the •...
Page 468 466 STARTING AND OPERATING type tires. Rotation will increase tread life, help to main- tain mud, snow, and wet traction levels, and contribute to a smooth, quiet ride. Refer to the “Maintenance Schedule” for the proper maintenance intervals. More frequent rotation is permis- sible if desired.
Page 469: Tire Pressure Monitor System (Tpms)
STARTING AND OPERATING 467 cold inflation tire pressure. This is defined as the tire TIRE PRESSURE MONITOR SYSTEM (TPMS) pressure after the vehicle has not been driven for at least NOTE: For vehicles equipped with run flat tires — When three hours, or driven less than 1 mile (1.6 km) after a the TPMS indicates a tire pressure of 14 psi (96 kPa) or three-hour period.
Page 470 468 STARTING AND OPERATING the recommended cold tire pressure in order for the Tire only after the tires have been inflated to the vehicle’s recommended cold tire pressure value. Pressure Monitoring Telltale Light to be turned off. The system will automatically update and the Tire Pressure CAUTION! Monitoring Telltale Light will extinguish once the up- dated tire pressures have been received.
Page 471 STARTING AND OPERATING 469 • Driving on a significantly under-inflated tire causes CAUTION! (Continued) the tire to overheat and can lead to tire failure. • After inspecting or adjusting the tire pressure, Under-inflation also reduces fuel efficiency and tire always reinstall the valve stem cap. This will tread life, and may affect the vehicle’s handling and prevent moisture and dirt from entering the valve stopping ability.
Page 472: Premium System
470 STARTING AND OPERATING NOTE: It is particularly important, for you to regularly Premium System check the tire pressure in all of your tires and to maintain The Tire Pressure Monitor System (TPMS) uses wireless the proper pressure. technology with wheel rim-mounted electronic sensors to monitor tire pressure levels.
Page 473 STARTING AND OPERATING 471 four active road tire pressures are low. In addition, the DID will display a Tire Low message in the tire graphic display screen with the pressure value(s) and the low tire(s) in a different color. An Inflate to XXX message will also be displayed.
Page 474 472 STARTING AND OPERATING the pressure value(s) will return to the original color and Light will no longer flash, the SERVICE TPM SYSTEM the Tire Pressure Monitoring Telltale Light will extin- message will not be present, and a pressure value will be guish once the updated tire pressure(s) have been re- displayed instead of dashes.
Page 475 STARTING AND OPERATING 473 location fault. In this case, the SERVICE TPM SYSTEM • After driving the vehicle for up to 20 minutes above message is then followed by a graphic display, with 15 mph (24 km/h), the Tire Pressure Monitoring pressure values still shown.
Page 476: General Information
474 STARTING AND OPERATING tire pressure is below the low-pressure warning limit in FUEL REQUIREMENTS any of the four active road tires. The vehicle may need to 6.4L Engine be driven for up to 20 minutes above 15 mph (24 km/h) in order for the TPMS to receive this information.
Page 477: Reformulated Gasoline
STARTING AND OPERATING 475 Over 40 auto manufacturers worldwide have issued and Gasoline/Oxygenate Blends endorsed consistent gasoline specifications (the World- Some fuel suppliers blend unleaded gasoline with oxy- wide Fuel Charter, WWFC) which define fuel properties genates such as Ethanol. necessary to deliver enhanced emissions, performance, and durability for your vehicle.
Page 478: E-85 Usage In Non-Flex Fuel Vehicles
476 STARTING AND OPERATING • Change the engine oil and oil filter. E-85 Usage In Non-Flex Fuel Vehicles Non-Flex Fuel Vehicles (FFV) are compatible with gaso- • Disconnect and reconnect the battery to reset the line containing 10% ethanol (E10). Gasoline with higher engine controller memory.
Page 479: Materials Added To Fuel
STARTING AND OPERATING 477 therefore, you should ask your gasoline retailer whether Fuel System Cautions the gasoline contains MMT. MMT is prohibited in Federal and California reformulated gasoline. CAUTION! Materials Added To Fuel Follow these guidelines to maintain your vehicle’s performance: All gasoline sold in the United States is required to •...
Page 480: Carbon Monoxide Warnings
478 STARTING AND OPERATING Carbon Monoxide Warnings CAUTION! (Continued) • The use of fuel additives, which are now being WARNING! sold as octane enhancers, is not recommended. Carbon monoxide (CO) in exhaust gases is deadly. Most of these products contain high concentrations Follow the precautions below to prevent carbon of methanol.
Page 481: Adding Fuel
STARTING AND OPERATING 479 WARNING! (Continued) • Guard against carbon monoxide with proper main- tenance. Have the exhaust system inspected every time the vehicle is raised. Have any abnormal conditions repaired promptly. Until repaired, drive with all side windows fully open. ADDING FUEL 1.
Page 482 480 STARTING AND OPERATING 3. There is no fuel filler cap. A flapper door inside the pipe seals the system. 4. Insert the fuel nozzle fully into the filler pipe, the nozzle opens and holds the flapper door while refuel- ing.
Page 483 STARTING AND OPERATING 481 • Insert funnel into same filler pipe opening as the fuel WARNING! nozzle. • Never have any smoking materials lit in or near the • Ensure funnel is inserted fully to hold flapper door vehicle when the fuel door is open or the tank is open.
Page 484: Emergency Fuel Filler Door Release
482 STARTING AND OPERATING Emergency Fuel Filler Door Release If you are unable to open the fuel filler door, use the fuel filler door emergency release. 1. Open the liftgate. 2. Push the inboard edge of the left storage bin to the center, this will pop up the outboard edge.
Page 485: Vehicle Loading
STARTING AND OPERATING 483 rear axle systems (GAWR). Total load must be limited so VEHICLE LOADING GVWR and front and rear GAWR are not exceeded. Certification Label Payload As required by National Highway Traffic Safety Admin- istration regulations, your vehicle has a certification label The payload of a vehicle is defined as the allowable load affixed to the driver’s side door or pillar.
Page 486 484 STARTING AND OPERATING Tire Size values are determined by weighing your vehicle on a commercial scale before any occupants or cargo are The tire size on the Vehicle Certification Label represents added. the actual tire size on your vehicle. Replacement tires must be equal to the load capacity of this tire size.
Page 487: Trailer Towing
STARTING AND OPERATING 485 items down low and be sure that the weight is distributed TRAILER TOWING equally. Stow all loose items securely before driving. In this section you will find safety tips and information on limits to the type of towing you can reasonably do Improper weight distributions can have an adverse effect with your vehicle.
Page 488 486 STARTING AND OPERATING exceed the GVWR. Refer to “Vehicle Loading/Vehicle evenly. Make sure that you do not exceed either front or Certification Label” in “Starting and Operating” for rear GAWR. Refer to “Vehicle Loading/Vehicle Certifica- further information. tion Label” in “Starting and Operating” for further information.
Page 489 STARTING AND OPERATING 487 Frontal Area steering and brake control thereby enhancing towing safety. The addition of a friction/hydraulic sway control The frontal area is the maximum height multiplied by the also dampens sway caused by traffic and crosswinds and maximum width of the front of a trailer.
Page 490: Trailer Hitch Classification
488 STARTING AND OPERATING Trailer Hitch Classification Definitions WARNING! (Continued) Class Max. Trailer Hitch • Weight Distributing Systems may not be compatible Industry Standards with Surge Brake Couplers. Consult with your hitch Class I - Light Duty 2,000 lbs (907 kg) and trailer manufacturer or a reputable Recreational Vehicle dealer for additional information.
Page 491: Trailer Towing Weights (Maximum Trailer Weight Ratings)
STARTING AND OPERATING 489 Trailer Towing Weights (Maximum Trailer Weight Ratings) GCWR Engine/ Max. GTW (Gross Max. Trailer Tongue (Gross Combined Frontal Area Transmission Trailer Wt.) Wt. (See Note) Wt. Rating) 6.4L Automatic 12,600 lbs 55 sq ft (5.11 sq m) 7,200 lbs (3 265 kg) 720 lbs (327 kg) (5 715 kg)
Page 492 490 STARTING AND OPERATING NOTE: Use a suitable tool such as a coin in the slot of the 2. Pull the bottom of the cover outward (towards you). locking retainer if needed for added leverage. Hitch Receiver Cover 3. Lower back down to disengage the tabs located at the Hitch Receiver Cover top of the hitch receiver cover and then pull outwards to remove.
Page 493: Trailer And Tongue Weight
STARTING AND OPERATING 491 Trailer And Tongue Weight Always load a trailer with 60% of the weight in the front of the trailer. This places 10% of the GTW on the tow hitch of your vehicle. Loads balanced over the wheels or heavier in the rear can cause the trailer to sway severely side to side which will cause loss of control of the vehicle and trailer.
Page 494: Towing Requirements
492 STARTING AND OPERATING NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options or dealer-installed options must be considered as part of the total load on your vehicle. Refer to “Tire Safety Information/Tire and Loading In- formation Placard”...
Page 495 STARTING AND OPERATING 493 CAUTION! (Continued) WARNING! • Then, during the first 500 miles (805 km) that a Improper towing can lead to a collision. Follow these trailer is towed, do not drive over 50 mph (80 km/h) guidelines to make your trailer towing as safe as and do not make starts at full throttle.
Page 496 494 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) • Safety chains must always be used between your • Total weight must be distributed between the tow vehicle and trailer. Always connect the chains to vehicle and the trailer such that the following four the hook retainers of the vehicle hitch.
Page 497 STARTING AND OPERATING 495 Towing Requirements — Trailer Lights And Wiring Whenever you pull a trailer, regardless of the trailer size, stoplights and turn signals on the trailer are required for motoring safety. The Trailer Tow Package may include a four- and seven- pin wiring harness.
Page 498 496 STARTING AND OPERATING Towing Requirements — Trailer Brakes WARNING! • Do not connect trailer brakes to your vehicle’s hydraulic brake lines. It can overload your brake system and cause it to fail. You might not have brakes when you need them and could have an accident.
Page 499 STARTING AND OPERATING 497 • Trailer brakes are recommended for trailers over CAUTION! 1,000 lbs (454 kg) and required for trailers in excess of 1,653 lbs (750 kg). If the trailer weighs more than 1,000 lbs (454 kg) loaded, it should have its own brakes and they Towing Requirements —...
Page 500: Towing Tips
498 STARTING AND OPERATING replacement procedures. Replacing tires with a higher NOTE: Using TOW mode, or selecting a lower gear load carrying capacity will not increase the vehicle’s (using the Paddle Shift switches) while operating the GVWR and GAWR limits. vehicle under heavy loading conditions will improve performance and extend transmission life by reducing Towing Tips...
Page 501 STARTING AND OPERATING 499 • To prevent excess heat generation, avoid continuous Cooling System driving at high RPM. Reduce vehicle speed as neces- To reduce potential for engine and transmission over- sary to avoid extended driving at high RPM. Return to heating, take the following actions: a higher gear or vehicle speed when grade and road City Driving...
Page 502: Recreational Towing
500 STARTING AND OPERATING NOTE: This vehicle may be towed on a flatbed or RECREATIONAL TOWING (BEHIND vehicle trailer provided all four wheels are OFF the MOTORHOME, ETC.) ground. Recreational towing is not allowed. CAUTION! Towing this vehicle with any of its wheels on the ground can cause severe transmission and/or transfer case damage.
Page 503 WHAT TO DO IN EMERGENCIES CONTENTS HAZARD WARNING FLASHERS ...502 ▫ Jacking Instructions ....509 IF YOUR ENGINE OVERHEATS .
Page 504: Hazard Warning Flashers
502 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHERS IF YOUR ENGINE OVERHEATS The Hazard Warning flasher switch is located on the In any of the following situations, you can reduce the switch bank just above the climate controls. potential for overheating by taking the appropriate ac- tion.
Page 505: Wheel And Tire Torque Specifications
WHAT TO DO IN EMERGENCIES 503 • You can also turn the temperature control to maximum WARNING! heat, the mode control to floor and the blower control to high. This allows the heater core to act as a You or others can be badly burned by hot engine supplement to the radiator and aids in removing heat coolant (antifreeze) or steam from your radiator.
Page 506: Torque Specifications
504 WHAT TO DO IN EMERGENCIES Torque Specifications Lug Nut/Bolt Torque **Lug Nut/ Lug Nut/ Bolt Size Bolt Socket Size 110 Ft-Lbs (149 N·m) M14 x 1.50 22 mm **Use only Chrysler recommended lug nuts/bolts and clean or remove any dirt or oil before tightening. Inspect the wheel mounting surface prior to mounting the tire and remove any corrosion or loose particles.
Page 507: Jacking And Tire Changing
WHAT TO DO IN EMERGENCIES 505 JACKING AND TIRE CHANGING WARNING! • Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel.
Page 508: Run Flat Tires
506 WHAT TO DO IN EMERGENCIES WARNING! (Continued) • The jack is designed to be used as a tool for changing tires only. The jack should not be used to lift the vehicle for service purposes. The vehicle should be jacked on a firm level surface only. Avoid ice or slippery areas.
Page 509: Jack Location
WHAT TO DO IN EMERGENCIES 507 NOTE: The funnel for the Cap-Less Fuel System is Jack Location located on top of the spare tire. If your vehicle is out of The scissor-type jack and tire changing tools are located fuel and an auxiliary fuel can is needed, insert the funnel in rear cargo area, below the load floor.
Page 510 508 WHAT TO DO IN EMERGENCIES 6. Block both the front and rear of the WARNING! wheel diagonally opposite of the jacking position. For example, if Do not attempt to change a tire on the side of the changing the right front tire, block vehicle closest to moving traffic, pull far enough off the left rear wheel.
Page 511: Jacking Instructions
WHAT TO DO IN EMERGENCIES 509 Jacking Instructions WARNING! (Continued) • Do not let anyone sit in the vehicle when it is on a WARNING! jack. Carefully follow these tire changing warnings to • Do not get under the vehicle when it is on a jack. If help prevent personal injury or damage to your you need to get under a raised vehicle, take it to a vehicle:...
Page 512 510 WHAT TO DO IN EMERGENCIES Jack Warning Label CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated in the Jacking Instructions for this vehicle. Spare Tire Label 1. Remove the spare tire, jack, and tools from storage. 3.
Page 513 WHAT TO DO IN EMERGENCIES 511 Jack And Tool Assembly Jacking Locations 5. For the front axle, place the jack on the body flange just behind the front tire as indicated by the triangular lift point symbol on the sill molding. Do not raise the vehicle until you are sure the jack is fully engaged.
Page 514 512 WHAT TO DO IN EMERGENCIES Lift Point Symbol On Sill Molding Front Jacking Location 6. For a rear tire, place the jack in the slot on the rear tie-down bracket, just forward of the rear tire (as indicated by the triangular lift point symbol on the sill molding).
Page 515 WHAT TO DO IN EMERGENCIES 513 Lift Point Symbol On Sill Molding Rear Jacking Location 7. Raise the vehicle by turning the jack screw clockwise. Raise the vehicle only until the tire just clears the surface and enough clearance is obtained to install the spare tire.
Page 516 514 WHAT TO DO IN EMERGENCIES WARNING! Raising the vehicle higher than necessary can make the vehicle less stable. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire. 8. Remove the lug nuts and wheel. 9.
Page 517 WHAT TO DO IN EMERGENCIES 515 10. Lower the vehicle by turning the jack screw counter- clockwise, and remove the jack and wheel blocks. 11. Finish tightening the lug nuts. Push down on the wrench while at the end of the handle for increased leverage.
Page 518: Road Tire Installation
516 WHAT TO DO IN EMERGENCIES WARNING! WARNING! A loose tire or jack thrown forward in a collision or To avoid the risk of forcing the vehicle off the jack, hard stop could endanger the occupants of the ve- do not tighten the lug nuts fully until the vehicle has hicle.
Page 519: Jump-Starting
WHAT TO DO IN EMERGENCIES 517 NOTE: When using a portable battery booster pack JUMP-STARTING follow the manufacturer’s operating instructions and If your vehicle has a discharged battery it can be jump- precautions. started using a set of jumper cables and a battery in another vehicle or by using a portable battery booster Preparations For Jump-Start pack.
Page 520 518 WHAT TO DO IN EMERGENCIES WARNING! • Take care to avoid the radiator cooling fan when- ever the hood is raised. It can start anytime the ignition switch is ON. You can be injured by moving fan blades. • Remove any metal jewelry such as rings, watch bands and bracelets that could make an inadvertent electrical contact.
Page 521: Jump-Starting Procedure
WHAT TO DO IN EMERGENCIES 519 2. Turn off the heater, radio, and all unnecessary electri- Jump-Starting Procedure cal accessories. WARNING! 3. Remove the protective cover over the remote positive (+) battery post. Pull upward on the cover to remove Failure to follow this jump-starting procedure could result in personal injury or property damage due to battery explosion.
Page 522 520 WHAT TO DO IN EMERGENCIES Connecting The Jumper Cables WARNING! (Continued) 1. Connect the positive (+) end of the jumper cable to the could result in personal injury. Only use the specific remote positive (+) post of the discharged vehicle. ground point, do not use any other exposed metal parts.
Page 523: Freeing A Stuck Vehicle
WHAT TO DO IN EMERGENCIES 521 3. Disconnect the positive (+) end of the jumper cable CAUTION! from the positive (+) post of the booster battery. Accessories plugged into the vehicle power outlets 4. Disconnect the opposite end of the positive (+) jumper draw power from the vehicle’s battery, even when not cable from the remote positive (+) post of the dis- in use (i.e., cellular phones, etc.).
Page 524 522 WHAT TO DO IN EMERGENCIES NOTE: Shifts between DRIVE and REVERSE can only be CAUTION! achieved at wheel speeds of 5 mph (8 km/h) or less. Whenever the transmission remains in NEUTRAL for Racing the engine or spinning the wheels may lead to more than two seconds, you must press the brake pedal transmission overheating and failure.
Page 525: Emergency Tow Hooks - If Equipped
WHAT TO DO IN EMERGENCIES 523 EMERGENCY TOW HOOKS — IF EQUIPPED WARNING! (Continued) If your vehicle is equipped with tow hooks, there will be longer than 30 seconds continuously without stop- one in the rear and two mounted on the front of the ping when you are stuck and do not let anyone near vehicle.
Page 526: Manual Park Release
524 WHAT TO DO IN EMERGENCIES In order to move the vehicle in cases where the transmis- CAUTION! sion will not shift out of PARK (such as a dead battery), a Manual Park Release is available. Tow hooks are for emergency use only, to rescue a vehicle stranded off road.
Page 527 WHAT TO DO IN EMERGENCIES 525 Manual Park Release Cover Release Latch 3. Using a screwdriver or similar tool, push the metal 4. While the metal latch is in the open position, simulta- latch in towards the tether strap. neously pull upwards on the tether strap until the lever clicks and latches in the released position.
Page 528 526 WHAT TO DO IN EMERGENCIES NOTE: To prevent the vehicle from rolling unintention- ally, firmly apply the parking brake. To Disengage the Manual Park Release Lever: 1. To disengage the Manual Park Release apply tension upward while pushing the release latch towards the tether to unlock the lever.
Page 529 WHAT TO DO IN EMERGENCIES 527 Release Latch Stowed Position 2. Once the tension has been released and the lever has NOTE: Be sure to replace the cover by snapping it back been unlocked be sure it is stowed properly and locks in place.
Page 530: Towing A Disabled Vehicle
528 WHAT TO DO IN EMERGENCIES TOWING A DISABLED VEHICLE CAUTION! The manufacturer requires towing your vehicle with all • Towing this vehicle using any other method can four wheels OFF the ground using a flatbed. cause severe transmission and/or transfer case dam- If the key fob is unavailable, or the vehicle’s battery is age.
Page 531 MAINTAINING YOUR VEHICLE CONTENTS ENGINE COMPARTMENT — 6.4L ..531 ▫ Accessory Drive Belt Inspection ...542 ONBOARD DIAGNOSTIC SYSTEM (OBD II) . . .532 ▫...
Page 532 530 MAINTAINING YOUR VEHICLE ▫ Transfer Case ......571 ▫ Front Turn Signal .....592 ▫...
Page 533: Engine Compartment - 6.4L
MAINTAINING YOUR VEHICLE 531 ENGINE COMPARTMENT — 6.4L 1 — Power Distribution Center (Fuses) 6 — Air Cleaner Filter 2 — Engine Oil Dipstick 7 — Power Steering Fluid Reservoir 3 — Engine Oil Fill 8 — Coolant Pressure Cap (Radiator) 4 —...
Page 534: Onboard Diagnostic System (Obd Ii)
532 MAINTAINING YOUR VEHICLE ONBOARD DIAGNOSTIC SYSTEM (OBD II) CAUTION! Your vehicle is equipped with a sophisticated onboard • Prolonged driving with the MIL on could cause diagnostic system called OBD II. This system monitors further damage to the emission control system. It the performance of the emissions, engine, and automatic could also affect fuel economy and driveability.
Page 535 MAINTAINING YOUR VEHICLE 533 Indicator Light (MIL)” is functioning and is not on when 2. As soon as you cycle the ignition switch to the ON the engine is running, and that the OBD II system is position, you will see the MIL symbol come on as part ready for testing.
Page 536: Replacement Parts
534 MAINTAINING YOUR VEHICLE you may need to do nothing more than drive your DEALER SERVICE vehicle as you normally would in order for your OBD II Your authorized dealer has the qualified service person- system to update. A recheck with the above test routine nel, special tools, and equipment to perform all service may then indicate that the system is now ready.
Page 537: Maintenance Procedures
MAINTAINING YOUR VEHICLE 535 WARNING! CAUTION! You can be badly injured working on or around a • Failure to properly maintain your vehicle or per- motor vehicle. Only do service work for which you form repairs and service when necessary could have the knowledge and the proper equipment.
Page 538: Engine Oil
536 MAINTAINING YOUR VEHICLE Engine Oil CAUTION! Checking Oil Level • Overfilling or underfilling will cause oil aeration To assure proper engine lubrication, the engine oil must or loss of oil pressure. This could damage your be maintained at the correct level. Check the oil level at engine.
Page 539 MAINTAINING YOUR VEHICLE 537 Engine Oil Selection CAUTION! For best performance and maximum protection under all Do not use chemical flushes in your engine oil as the types of operating conditions, the manufacturer only chemicals can damage your engine. Such damage is recommends full synthetic engine oils that meet the not covered by the New Vehicle Limited Warranty.
Page 540 538 MAINTAINING YOUR VEHICLE Synthetic Engine Oils CAUTION! You may use synthetic engine oils provided the recom- Do not use chemical flushes in your engine oil as the mended oil quality requirements are met, and the recom- chemicals can damage your engine. Such damage is mended maintenance intervals for oil and filter changes not covered by the New Vehicle Limited Warranty.
Page 541: Engine Oil Filter
MAINTAINING YOUR VEHICLE 539 station or governmental agency for advice on how and WARNING! where used oil and oil filters can be safely discarded in your area. The air induction system (air cleaner, hoses, etc.) can provide a measure of protection in the case of engine Engine Oil Filter backfire.
Page 542 540 MAINTAINING YOUR VEHICLE Engine Air Cleaner Filter Inspection and Replacement Inspect engine air cleaner filter for dirt and or debris, if you find evidence of either dirt or debris you should change your air cleaner filter. Engine Air Cleaner Filter Removal 1.
Page 543 MAINTAINING YOUR VEHICLE 541 2. Lift the air cleaner cover to access the air cleaner filter. 3. Remove the air cleaner filter element from the housing assembly. Open Air Cleaner Filter Assembly Air Cleaner Filter 1 — Air Cleaner Cover 1 —...
Page 544: Accessory Drive Belt Inspection
542 MAINTAINING YOUR VEHICLE Engine Air Cleaner Filter Installation Accessory Drive Belt Inspection NOTE: Inspect and clean the housing if dirt or debris is WARNING! present before replacing the air filter element. • Do not attempt to inspect an accessory drive belt 1.
Page 545 MAINTAINING YOUR VEHICLE 543 When inspecting accessory drive belts, small cracks that run across ribbed surface of belt from rib to rib, are considered normal. These are not a reason to replace belt. However, cracks running along a rib (not across) are not normal.
Page 546: Maintenance-Free Battery
544 MAINTAINING YOUR VEHICLE • Belt slips Maintenance-Free Battery Your vehicle is equipped with a maintenance-free battery. • “Groove jumping (belt does not maintain correct You will never have to add water, nor is periodic main- position on pulley) tenance required. •...
Page 547 MAINTAINING YOUR VEHICLE 545 WARNING! WARNING! (Continued) • Batteries contain sulfuric acid that can burn your • When temperatures are below the freezing point, skin or eyes and generate hydrogen gas which is electrolyte in a discharged battery may freeze. Do flammable and explosive.
Page 548: Air Conditioner Maintenance
546 MAINTAINING YOUR VEHICLE Air Conditioner Maintenance WARNING! (Continued) For best possible performance, your air conditioner should • The air conditioning system contains refrigerant be checked and serviced by an authorized dealer at the start under high pressure. To avoid risk of personal of each warm season.
Page 549 MAINTAINING YOUR VEHICLE 547 Protection Agency and is an ozone-saving product. How- Air Conditioning Filter Replacement (A/C Air ever, the manufacturer recommends that air conditioning Filter) service be performed by authorized dealer or other Refer to the “Maintenance Schedule” for the proper service facilities using recovery and recycling equipment.
Page 550 548 MAINTAINING YOUR VEHICLE The A/C air filter is located in the fresh air inlet behind the glove compartment. Perform the following procedure to replace the filter: 1. Open the glove compartment and remove all contents. Glove Compartment 1 — Glove Compartment Travel Stops 2 —...
Page 551 MAINTAINING YOUR VEHICLE 549 2. There are glove compartment travel stops on both sides of the glove compartment door, partially close the glove compartment door and push inward to release the glove compartment travel stop on one side and repeat this procedure for the opposite side. 3.
Page 552 550 MAINTAINING YOUR VEHICLE 5. Remove the filter cover by disengaging the retaining tab and mid way snap that secures the filter cover to the HVAC housing. Disengage the mid way snap by pulling the door outward. Unhinge the filter cover on the right side to fully remove the cover.
Page 553: Body Lubrication
MAINTAINING YOUR VEHICLE 551 7. Install the A/C air filter with the arrow on the filter NOTE: Ensure the glove compartment door hinges and pointing toward the floor. When installing the filter glove compartment travel stops are fully engaged. cover, make sure the retaining tabs fully engage the Body Lubrication cover.
Page 554: Windshield Wiper Blades
552 MAINTAINING YOUR VEHICLE The external lock cylinders should be lubricated twice a NOTE: Life expectancy of wiper blades varies depend- year, preferably in the Fall and Spring. Apply a small ing on geographical area and frequency of use. Poor amount of a high quality lubricant, such as MOPAR®...
Page 555 MAINTAINING YOUR VEHICLE 553 Front Wiper Blade Removal/Installation CAUTION! Do not allow the wiper arm to spring back against the glass without the wiper blade in place or the glass may be damaged. 1. Lift the wiper arm to raise the wiper blade off of the glass, until the wiper arm is in the full up position.
Page 556 554 MAINTAINING YOUR VEHICLE 2. To disengage the wiper blade from the wiper arm, flip up the release tab on the wiper blade and while holding the wiper arm with one hand, slide the wiper blade down towards the base of the wiper arm. Wiper Blade With Release Tab In Unlocked Position 1 —...
Page 557 MAINTAINING YOUR VEHICLE 555 3. With the wiper blade disengaged, remove the wiper blade from the wiper arm by holding the wiper arm with one hand and separating the wiper blade from the wiper arm with the other hand (move the wiper blade toward the right side of the vehicle to separate the wiper blade from the wiper arm).
Page 558 556 MAINTAINING YOUR VEHICLE Installing The Front Wipers Rear Wiper Blade Removal/Installation 1. Lift the wiper arm off of the glass, until the wiper arm 1. Lift the rear wiper arm pivot cap away from the glass is in the full up position. to allow the rear wiper blade to be raised off of the glass.
Page 559 MAINTAINING YOUR VEHICLE 557 Wiper Pivot Cap In Unlocked Position Wiper Blade In Folded Out Position 1 — Wiper Arm Pivot Cap 1 — Wiper Arm Pivot Cap 2 — Wiper Arm 2 — Wiper Arm 3 — Wiper Blade 2.
Page 560 558 MAINTAINING YOUR VEHICLE 3. To remove the wiper blade from the wiper arm, grasp the bottom end of the wiper blade nearest to wiper arm with your right hand. With your left hand hold the wiper arm as you pull the wiper blade away from the wiper arm past its stop far enough to unsnap the wiper blade pivot pin from the receptacle on the end of the wiper arm.
Page 561: Adding Washer Fluid
MAINTAINING YOUR VEHICLE 559 Installing The Rear Wiper Adding Washer Fluid This vehicle is equipped with a Driver Information 1. Lift the rear wiper arm pivot cap away from the glass Display (DID), the DID will indicate when the washer to allow the rear wiper blade to be raised off of the fluid level is low.
Page 562: Exhaust System
560 MAINTAINING YOUR VEHICLE rating information can be found on most washer fluid have an authorized technician inspect the complete ex- containers. haust system and adjacent body areas for broken, dam- aged, deteriorated, or mispositioned parts. Open seams WARNING! or loose connections could permit exhaust fumes to seep into the passenger compartment.
Page 563 MAINTAINING YOUR VEHICLE 561 WARNING! (Continued) CAUTION! (Continued) • A hot exhaust system can start a fire if you park • Damage to the catalytic converter can result if your over materials that can burn. Such materials might vehicle is not kept in proper operating condition. be grass or leaves coming into contact with your In the event of engine malfunction, particularly exhaust system.
Page 564: Cooling System
562 MAINTAINING YOUR VEHICLE NOTE: Intentional tampering with emissions control • Do not idle the engine with any spark plug wires systems can result in civil penalties being assessed disconnected or removed, such as when diagnostic against you. testing, or for prolonged periods during very rough idle or malfunctioning operating conditions.
Page 565 MAINTAINING YOUR VEHICLE 563 Coolant Checks If the cap is sealing properly, the engine coolant (anti- freeze) will begin to drain from the coolant recovery Check the engine coolant (antifreeze) protection every 12 bottle. DO NOT REMOVE THE COOLANT PRESSURE months (before the onset of freezing weather, where CAP WHEN THE COOLING SYSTEM IS HOT.
Page 566 564 MAINTAINING YOUR VEHICLE Selection Of Coolant CAUTION! (Continued) Refer to “Fluids, Lubricants, and Genuine Parts” in OAT coolant (conforming to MS-12106), by an “Maintaining Your Vehicle” for further information. authorized dealer as soon as possible. • Do not use water alone or alcohol-based engine CAUTION! coolant (antifreeze) products.
Page 567 MAINTAINING YOUR VEHICLE 565 150,000 miles (240,000 km) before replacement. To pre- • Use only high purity water such as distilled or deion- vent reducing this extended maintenance period, it is ized water when mixing the water/engine coolant important that you use the same engine coolant (OAT (antifreeze) solution.
Page 568 566 MAINTAINING YOUR VEHICLE • Mixing engine coolant (antifreeze) types is not recom- WARNING! mended and can result in cooling system damage. If HOAT and OAT coolant are mixed in an emergency, • Do not open hot engine cooling system. Never add have a authorized dealer drain, flush, and refill with engine coolant (antifreeze) when the engine is OAT coolant (conforming to MS-12106) as soon as...
Page 569 MAINTAINING YOUR VEHICLE 567 engine coolant in open containers or allow it to remain in When additional engine coolant (antifreeze) is needed to puddles on the ground. If ingested by a child or pet, seek maintain the proper level, only OAT coolant that meets the emergency assistance immediately.
Page 570: Brake System
568 MAINTAINING YOUR VEHICLE • Check the coolant freeze point in the radiator and in • Do not change the thermostat for Summer or Winter the coolant expansion bottle. If engine coolant (anti- operation. If replacement is ever necessary, install freeze) needs to be added, the contents of the coolant ONLY the correct type thermostat.
Page 571 MAINTAINING YOUR VEHICLE 569 Refer to “Fluids, Lubricants, and Genuine Parts” in WARNING! (Continued) “Maintaining Your Vehicle” for further information. high brake temperatures, excessive lining wear, and possible brake damage. You would not have your full WARNING! braking capacity in an emergency. •...
Page 572: Front/Rear Axle Fluid
570 MAINTAINING YOUR VEHICLE WARNING! (Continued) WARNING! (Continued) • To avoid contamination from foreign matter or • Do not allow petroleum based fluid to contaminate moisture, use only new brake fluid or fluid that has the brake fluid. Brake seal components could be been in a tightly closed container.
Page 573: Transfer Case
MAINTAINING YOUR VEHICLE 571 The front axle fill and drain plugs should be tightened to Selection Of Lubricant 22 to 29 ft lbs (30 to 40 N·m). Use only the manufacturer’s recommended fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintain- CAUTION! ing Your Vehicle”...
Page 574: Automatic Transmission
572 MAINTAINING YOUR VEHICLE Drain only the manufacturer’s specified transmission fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in this First remove fill plug, then remove drain plug. Recom- section for fluid specifications. It is important to maintain mended tightening torque for drain and fill plugs is 15 to the transmission fluid at the correct level using the 25 ft lbs (20 to 34 N·m).
Page 575 MAINTAINING YOUR VEHICLE 573 Special Additives Fluid Level Check The manufacturer strongly recommends against using The fluid level is preset at the factory and does not any special additives in the transmission. require adjustment under normal operating conditions. Routine fluid level checks are not required, therefore the Automatic Transmission Fluid (ATF) is an engineered transmission has no dipstick.
Page 576: Appearance Care And Protection From Corrosion
574 MAINTAINING YOUR VEHICLE Appearance Care And Protection From Corrosion CAUTION! Protection Of Body And Paint From Corrosion If a transmission fluid leak occurs, visit your autho- Vehicle body care requirements vary according to geo- rized dealer immediately. Severe transmission dam- graphic locations and usage.
Page 577 MAINTAINING YOUR VEHICLE 575 What Causes Corrosion? • If insects, tar, or other similar deposits have accumu- lated on your vehicle, use MOPAR® Super Kleen Bug Corrosion is the result of deterioration or removal of and Tar Remover to remove. paint and protective coatings from your vehicle.
Page 578 576 MAINTAINING YOUR VEHICLE Special Care • If you carry special cargo such as chemicals, fertilizers, de-icer salt, etc., be sure that such materials are well • If you drive on salted or dusty roads or if you drive packaged and sealed. near the ocean, hose off the undercarriage at least once a month.
Page 579 MAINTAINING YOUR VEHICLE 577 Stain Repel Fabric Cleaning Procedure — If CAUTION! Equipped Do not use scouring pads, steel wool, a bristle brush, Stain Repel seats may be cleaned in the following manner: or metal polishes. Do not use oven cleaner. These •...
Page 580 578 MAINTAINING YOUR VEHICLE Interior Care WARNING! Use MOPAR® Total Clean to clean fabric upholstery and Do not use volatile solvents for cleaning purposes. carpeting. Many are potentially flammable, and if used in Use MOPAR® Total Clean to clean vinyl upholstery. closed areas they may cause respiratory harm.
Page 581 MAINTAINING YOUR VEHICLE 579 quarter window equipped with the radio antenna. Do Seat Belt Maintenance not use scrapers or other sharp instrument that may Do not bleach, dye, or clean the belts with chemical scratch the elements. solvents or abrasive cleaners. This will weaken the fabric. Sun damage can also weaken the fabric.
Page 582: Fuses
580 MAINTAINING YOUR VEHICLE FUSES WARNING! WARNING! A frayed or torn belt could rip apart in a collision and leave you with no protection. Inspect the belt system • When replacing a blown fuse, always use an appro- periodically, checking for cuts, frays, or loose parts. priate replacement fuse with the same amp rating as Damaged parts must be replaced immediately.
Page 583: Power Distribution Center
MAINTAINING YOUR VEHICLE 581 WARNING! (Continued) • If a general protection fuse for safety systems (air bag system, braking system), power unit systems (engine system, gearbox system) or steering system blows, contact an authorized dealer. Power Distribution Center The Power Distribution Center is located in the engine compartment near the battery.
Page 584 582 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Micro Fuse Description 60 Amp Yellow – Radiator Fan 40 Amp Green – Compressor for Air Suspension - If Equipped 40 Amp Green – Anti-lock Brakes/Electronic Stability Control Pump 40 Amp Green – Starter Solenoid 20 Amp Blue –...
Page 585 MAINTAINING YOUR VEHICLE 583 Cavity Cartridge Fuse Micro Fuse Description 30 Amp Pink – Interior Lights #1 30 Amp Pink – Driver Door Module 30 Amp Pink – Front Wipers 30 Amp Pink – Anti-lock Brakes/Stability Control Module/Valves 20 Amp Blue –...
Page 586 584 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Micro Fuse Description – 20 Amp Yellow Horn – 10 Amp Red Diagnostic Port – 10 Amp Red Tire Pressure Monitor - If Equipped – 10 Amp Red Integrated Central Stack / Climate Control –...
Page 587 MAINTAINING YOUR VEHICLE 585 Cavity Cartridge Fuse Micro Fuse Description – 10 Amp Red Transmission Control Module/PM Sensor (diesel engine only) – 10 Amp Red Air Conditioning Clutch – 20 Amp Yellow Ignition Coils (Gas), Urea Heater (Diesel) – 25 Amp Clear Fuel Injectors / Powertrain –...
Page 588 586 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Micro Fuse Description – 10 Amp Red Drivetrain Control Module/Front Axle Disconnect Module – 10 Amp Red Engine Control Module / Electric Power Steering - If Equipped – 10 Amp Red Universal Garage Door Opener / Compass / Anti- Intrusion Module –...
Page 589 MAINTAINING YOUR VEHICLE 587 Cavity Cartridge Fuse Micro Fuse Description – 10 Amp Red Rear Counsel Lamp - If Equipped – 20 Amp Yellow Cigar Lighter – 10 Amp Red Shifter / Transfer Case Module – 10 Amp Red Rear Camera / ParkSense® –...
Page 590: Vehicle Storage
588 MAINTAINING YOUR VEHICLE VEHICLE STORAGE CAUTION! If you are leaving your vehicle dormant for more than 21 • When installing the power distribution center days you may want to take steps to protect your battery. cover, it is important to ensure the cover is properly You may: positioned and fully latched.
Page 591: Replacement Bulbs
MAINTAINING YOUR VEHICLE 589 REPLACEMENT BULBS Interior Bulbs Bulb Number Glove Box Lamp Grab Handle Lamp L002825W5W Overhead Console Reading Lamps VT4976 Rear Cargo Lamp 214–2 Visor Vanity Lamp V26377 Underpanel Courtesy Lamps Instrument Cluster (General Illumination) Telltale/Hazard Lamp...
Page 592 590 MAINTAINING YOUR VEHICLE Exterior Bulbs Bulb Number Headlamps (Low Beam) Premium Headlamps (Low/High Beam) D3S (Serviced at Authorized Dealer) Headlamps (High Beam) 9005 Premium Park/Turn Signal Lamp LED - (Service at Authorized Dealer) Premium Daytime Running Lamp (DRL) LED - (Service at Authorized Dealer) Front Fog Lamps Front Side Marker Premium Front Side Marker - If Equipped...
Page 593: Bulb Replacement
MAINTAINING YOUR VEHICLE 591 Bulb Number Rear Body Side Tail Lamps LED - (Service at Authorized Dealer) CHMSL - Center High Mounted Stop Lamp LED - (Service at Authorized Dealer) NOTE: Numbers refer to commercial bulb types that can be purchased from your authorized dealer. If a bulb needs to be replaced, visit your authorized dealer or refer to the applicable Service Manual.
Page 594: Halogen Headlamps - If Equipped
592 MAINTAINING YOUR VEHICLE 3. Disconnect the electrical connector and replace the WARNING! bulb. A transient high voltage occurs at the bulb sockets of CAUTION! High Intensity Discharge (HID) headlamps when the headlamp switch is turned ON. It may cause serious Do not touch the new bulb with your fingers.
Page 595: Front Fog Lamps
MAINTAINING YOUR VEHICLE 593 CAUTION! CAUTION! Do not touch the new bulb with your fingers. Oil • Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the contamination will severely shorten bulb life. If bulb comes in contact with any oily surface, clean the the bulb comes in contact with any oily surface, bulb with rubbing alcohol.
Page 596: Rear Tail, Stop, Turn Signal, And Backup Lamps
594 MAINTAINING YOUR VEHICLE 7. Connect the wiring harness to the front fog lamp connector. Rear Tail, Stop, Turn Signal, And Backup Lamps 1. Raise the liftgate. 2. Remove the two push-pins from the tail lamp housing. 3. Grasp the tail lamp and pull firmly rearward to disengage the lamp from the aperture panel.
Page 597: Rear Liftgate Mounted Tail Lamp
MAINTAINING YOUR VEHICLE 595 Rear Liftgate Mounted Tail Lamp 1. Raise the liftgate. 2. Use a fiber stick or flat blade screw driver to pry the lower trim from the liftgate. 3. Continue removing the trim. 4. Disconnect the two trim panel lights. Rear Liftgate Tail Lamps 5.
Page 598: Center High-Mounted Stop Lamp (Chmsl)
596 MAINTAINING YOUR VEHICLE Center High-Mounted Stop Lamp (CHMSL) The center high mounted stop lamp is LED. Service at Authorized Dealer. 1 — Auxiliary LED Tail Connector – Do Not Remove 2 — Backup Bulb Socket 6. Remove/replace bulb(s). Center High-Mounted Stop Lamp Rear License Lamp 7.
Page 599: Fluid Capacities
MAINTAINING YOUR VEHICLE 597 FLUID CAPACITIES U.S. Metric 25 Gallons 94 Liters Fuel (Approximate) Engine Oil With Filter 6.4 Liter Engine (SAE 0W-40, Synthetic API Certified) 7 Quarts 6.6 Liters Cooling System* 6.4 Liter Engine (MOPAR® Antifreeze/Engine Coolant 10 Year/ 16 Quarts 15.5 Liters 150,000 Mile Formula that meets the requirements of Chrysler Ma-...
Page 600: Fluids, Lubricants And Genuine Parts
598 MAINTAINING YOUR VEHICLE FLUIDS, LUBRICANTS AND GENUINE PARTS Engine Component Fluid, Lubricant or Genuine Part Engine Coolant We recommend you use MOPAR® Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) that meets the requirements of Chrysler Material Standard MS-12106. Engine Oil For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils that meet...
Page 601: Chassis
MAINTAINING YOUR VEHICLE 599 Chassis Component Fluid, Lubricant or Genuine Part Automatic Transmission Use only MOPAR® ZF 8&9 Speed ATF™ Automatic Transmission Fluid, or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission. Transfer Case We recommend you use MOPAR®...
Page 603: Maintenance Schedules
MAINTENANCE SCHEDULES CONTENTS MAINTENANCE SCHEDULE ... . .602 ▫ MAINTENANCE CHART ....604...
Page 604 602 MAINTENANCE SCHEDULES Based on engine operation conditions, the oil change MAINTENANCE SCHEDULE indicator message will illuminate. This means that ser- The Scheduled Maintenance services listed in this vice is required for your vehicle. Have your vehicle manual must be done at the times or mileages specified serviced as soon as possible, within the next 500 miles to protect your vehicle warranty and ensure the best (805 km).
Page 605 MAINTENANCE SCHEDULES 603 Your authorized dealer will reset the oil change indicator • Inspect the battery, and clean and tighten the terminals message after completing the scheduled oil change. If a as required. scheduled oil change is performed by someone other •...
Page 606: Maintenance Chart
604 MAINTENANCE SCHEDULES MAINTENANCE CHART Miles: Or Months: 96 102 108 114 120 126 132 138 144 150 Or Kilometers: Change the engine oil and engine oil filter. Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before scheduled maintenance.
Page 607 MAINTENANCE SCHEDULES 605 Miles: Or Months: 96 102 108 114 120 126 132 138 144 150 Or Kilometers: Change the engine oil and engine oil filter. Inspect the exhaust system. Adjust the parking brake on vehicles equipped with four wheel disc brakes. Drain the transfer case and refill.
Page 608 606 MAINTENANCE SCHEDULES Miles: Or Months: 96 102 108 114 120 126 132 138 144 150 Or Kilometers: Change the engine oil and engine oil filter. Inspect front suspension, tie rod ends, and boot seals, for cracks or leaks and all parts for damage, wear, improper loose- ness or end play;...
Page 609 MAINTENANCE SCHEDULES 607 Miles: Or Months: 96 102 108 114 120 126 132 138 144 150 Or Kilometers: Change the engine oil and engine oil filter. Flush and replace the engine coolant at 120 months if not done at 150,000 miles (240,000 km).
Page 610 608 MAINTENANCE SCHEDULES WARNING! • You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent me- chanic.
Page 611 IF YOU NEED CONSUMER ASSISTANCE CONTENTS SUGGESTIONS FOR OBTAINING SERVICE FOR ▫ Customer Assistance For The Hearing Or Speech YOUR VEHICLE ..... . .611 Impaired (TDD/TTY).
Page 612 610 IF YOU NEED CONSUMER ASSISTANCE DEPARTMENT OF TRANSPORTATION UNIFORM ▫ Traction Grades ..... . .617 TIRE QUALITY GRADES ....617 ▫...
Page 613: Suggestions For Obtaining Service For Your Vehicle
IF YOU NEED CONSUMER ASSISTANCE 611 SUGGESTIONS FOR OBTAINING SERVICE FOR Be Reasonable With Requests YOUR VEHICLE If you list a number of items and you must have your vehicle by the end of the day, discuss the situation with Prepare For The Appointment the service advisor and list the items in order of priority.
Page 614: Chrysler Group Llc Customer Center
612 IF YOU NEED CONSUMER ASSISTANCE facilities, factory-trained technicians, special tools, and • Authorized dealer name the latest information to ensure the vehicle is fixed • Vehicle Identification Number (VIN) correctly and in a timely manner. • Vehicle delivery date and mileage This is why you should always talk to an authorized dealer service manager first.
Page 615: In Mexico Contact
IF YOU NEED CONSUMER ASSISTANCE 613 Canadian residents with hearing difficulties that require In Mexico Contact: assistance can use the special needs relay service offered Av. Prolongacion Paseo de la Reforma, 1240 by Bell Canada. For TTY teletypewriter users, dial 711 Sante Fe C.P.
Page 616: Warranty Information
614 IF YOU NEED CONSUMER ASSISTANCE The manufacturer will not stand behind any service WARNING! contract that is not the manufacturer’s service contract. It is not responsible for any service contract other than the Engine exhaust (internal combustion engines only), manufacturer’s service contract.
Page 617: Mopar® Parts
IF YOU NEED CONSUMER ASSISTANCE 615 campaign. However, NHTSA cannot become involved in MOPAR® PARTS individual problems between you, your authorized MOPAR® fluids, lubricants, parts, and accessories are dealer, and the manufacturer. available from an authorized dealer. They are recom- mended for your vehicle in order to help keep the vehicle To contact NHTSA, you may either call the Auto Safety operating at its best.
Page 618: Publication Order Forms
616 IF YOU NEED CONSUMER ASSISTANCE Diagnostic Procedure Manuals PUBLICATION ORDER FORMS To order the following manuals, you may use either the Diagnostic Procedure Manuals are filled with diagrams, website or the phone numbers listed below. Visa, Mas- charts and detailed illustrations. These practical manuals tercard, American Express, and Discover orders are ac- make it easy for students and technicians to find and fix cepted.
Page 619 IF YOU NEED CONSUMER ASSISTANCE 617 Call toll free at: Treadwear The Treadwear grade is a comparative rating, based on • 1–800–890–4038 (U.S.) the wear rate of the tire when tested under controlled • 1–800–387–1143 (Canada) conditions on a specified government test course. For example, a tire graded 150 would wear one and one-half times as well on the government course as a tire graded Visit us on the Worldwide Web at:...
Page 620 618 IF YOU NEED CONSUMER ASSISTANCE Vehicle Safety Standard No. 109. Grades B and A repre- WARNING! sent higher levels of performance on the laboratory test wheel, than the minimum required by law. The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not WARNING! include acceleration, cornering, hydroplaning, or...
Page 621 INDEX...
Page 622 620 INDEX About Your Brakes ......431 Air bag Deployment ......66 Adaptive Cruise Control (ACC) (Cruise Control) .
Page 623 INDEX 621 Anti-Lock Warning Light ....290 Axle Fluid ......599 Appearance Care .
Page 624 622 INDEX Bulbs, Light ......111 Chart, Tire Sizing ......442 Check Engine Light (Malfunction Indicator Light) .
Page 625 INDEX 623 Clean Air Gasoline ......475 Pressure Cap ......566 Cleaning Radiator Cap .
Page 626 624 INDEX Door Opener, Garage..... . .246 Emergency, In Case of Driver Information Display Freeing Vehicle When Stuck ....521 DID .
Page 627 INDEX 625 Oil Filler Cap ......537 Engine Oil Disposal .....538 Oil Selection .
Page 628 626 INDEX Front Axle (Differential).....570 Gasoline (Fuel) ......474 Fuel .
Page 629 INDEX 627 Bulb Replacement ..... . .592 Interior Appearance Care ....578 On With Wipers .
Page 630 628 INDEX Key-In Reminder ......15 Liftgate ....... . .44 Keyless Enter-N-Go .
Page 631 INDEX 629 Headlights On With Wipers ....167 Loading Vehicle ......483 High Beam Indicator .
Page 632 630 INDEX Mirrors ....... .121 Capacity ......597 Electric Powered .
Page 633 INDEX 631 Owner’s Manual (Operator Manual) ... . .6 Steering ......427 Sunroof .
Page 634 632 INDEX Rear Cross Path ......138 Programming Additional Transmitters ..18 Rear Cupholder .
Page 635 INDEX 633 Schedule, Maintenance .....602 Adjustable Upper Shoulder Anchorage ..57 Seat Belt And Pregnant Women .
Page 636 634 INDEX Arm The System ......19 Snow Tires ......457 Tamper Alert .
Page 637 INDEX 635 Storage ....... .272 Tires........111 Storage, Vehicle.
Page 638 636 INDEX Spare Tire ......507 Wiring .......495 Spinning .
Page 639 INDEX 637 Uconnect® Viscosity, Engine Oil ..... . .537 Operation ......345 Screen Activated Features .
Page 640 638 INDEX Windshield Washers ..... . .176 Wiper Blade Replacement ....552 Fluid .
Page 641 INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this The antenna cable should be as short as practical and vehicle’s electronic system to provide immunity to radio routed away from the vehicle wiring when possible. Use frequency signals. Mobile two-way radios and telephone only fully shielded coaxial cable.
Page 642 Chrysler Group LLC 15WK742-126-AA First Edition Printed in U.S.A. Second Edition Printed in U.S.A 15WK742-126-AB...

This manual is also suitable for:

Grand cherokee srt 2015