Normal (Fixed Speed) Cruise Control Mode - Jeep CHEROKEE 2020 Owner's Manual

230 STARTING AND OPERATING
N (F S ) C
ORMAL IXED PEED
C M
ONTROL ODE
In addition to Adaptive Cruise Control (ACC)
mode, a Normal (Fixed Speed) Cruise Control
mode is available for cruising at fixed speeds.
The Normal (Fixed Speed) Cruise Control mode
is designed to maintain a set cruising speed
without requiring the driver to operate the
accelerator.
Speed Control can only be operated if the
vehicle speed is above 20 mph (32 km/h).
To change between the different control modes,
push the Adaptive Cruise Control (ACC) on/off
button which turns the ACC on and the Normal
(Fixed Speed) Cruise Control off. Pushing of the
Normal (Fixed Speed) Cruise Control on/off
button will result in turning on (changing to) the

Normal (Fixed Speed) Cruise Control mode.

RUISE
In the Normal (Fixed Speed) Cruise Control
mode, the system will not react to vehicles
ahead. In addition, the proximity warning
does not activate and no alarm will sound
even if you are too close to the vehicle ahead
since neither the presence of the vehicle
ahead nor the vehicle-to-vehicle distance is
detected. Be sure to maintain a safe distance
between your vehicle and the vehicle ahead.
Always be aware which mode is selected.
To Set A Desired Speed
Turn the Normal (Fixed Speed) Cruise
Control on. When the vehicle has
reached the desired speed, push the
SET (+) or SET (-) button and release.
Release the accelerator and the vehicle will
operate at the selected speed. Once a speed
has been set a message (CRUISE CONTROL SET
TO MPH/km/h) will appear indicating what
speed was set. This light will turn on when the
speed control is set.
WARNING!
To Vary The Speed Setting
To Increase Speed
When the Normal (Fixed Speed) Cruise Control
is set, you can increase speed by pushing the
SET (+) button.
The driver's preferred units can be selected
through the instrument panel settings. Refer to
"Instrument Cluster Display" in "Getting To
Know Your Instrument Panel" for more
information. The speed increment shown is
dependent on the speed of US (mph) or Metric
(km/h) units:
US Speed (mph)
Pushing the SET (+) button once will result in

a 1 mph increase in set speed. Each subse-
quent tap of the button results in an increase
of 1 mph.
If the button is continually pushed, the set

speed will continue to increase in 5 mph
increments until the button is released. The
increase in set speed is reflected in the
instrument cluster display.