Lanesense Warning Message - Jeep CHEROKEE 2020 Owner's Manual

262 STARTING AND OPERATING
To turn the LaneSense system on,
push the LaneSense button (LED
turns off). A "LaneSense On"
message is shown in the instrument
cluster display.
LaneSense On Message
To turn the LaneSense system off, push the
LaneSense button once (LED turns on).
NOTE:
The LaneSense system will retain the last
system state, on or off, from the last ignition
cycle when the ignition is placed in the ON/RUN
position.
L S W M
ANE ENSE ARNING ESSAGE
The LaneSense system will indicate the current
lane drift condition through the instrument
cluster display.
Base Instrument Cluster Display — If Equipped
When the LaneSense system is on, the lane
lines are gray when both of the lane boundaries
have not been detected and the LaneSense
telltale is solid white.
System On (Gray Lines/White Telltale)
Left Lane Departure — Only Left Lane Detected
When the LaneSense system is on, the

LaneSense telltale is solid white when
only the left lane marking has been detected
and the system is ready to provide visual
warnings in the instrument cluster display if
an unintentional lane departure occurs.
When the LaneSense system senses the lane

has been approached and is in a lane depar-
ture situation, the left thick lane line flashes
from white to gray, the left thin line remains
solid white and the LaneSense telltale
changes from solid white to flashing yellow.
Lane Approached (Flashing White To Gray Thick Line/
Flashing Yellow Telltale)