Sega Airline Pilots Owner's Manual page 14

4 Mount the Billboard by hanging
on the Billboard Hook, secure
the Billboard with 2 Bolts
through the square holes of Bolt
Lids previously removed, and
connect the Connector.
5 Install the 2 Bolt Lids and
Connector Lid.
Insert the Billboard Holder in
6
place so as to fit the bolt
positions, and fasten the bolts
to secure the Billboard.
7
Install the Billboard Plate by
using the procedure opposite
above
8 Apply the oblique line portion
of the POP PANEL to the upper
rear part of the Billboard. At this
time, ensure that the POP does
not disappear.
1