Table of Contents
Advertisement
２−４ GAME ASSIGNMENTS
The screen will not reflect the actual satellite layout if satellites are
positioned in any pattern other than those indicated by SEGA, or if there is
an error in the satellite number/distribution/location settings. Be sure these
settings are correct.
Select GAME ASSIGNMENTS to set the placement of the main units and satellites.
The display of the number of satellites will change when SATELLITE TOTAL is selected.
Set the actual number of satellites and the display of the number of satellites to be the same.
Note: With two satellites, use the setting for four satellites.
Select NUMBER DISPLAY to switch the Satellite number display ON/OFF.
<<GAME
ASSIGNMENTS>>
SATELLITE
TOTAL
-
8
-
NUMBER
DISPLAY
ON
ARRANGEMENT
POSITION
->
EXIT
SELECT
WITH
SERVICE
BUTTON
AND
PRESS
TEST
BUTTON
FIG. 2. 4 a GAME ASSIGNMENTS screen
Use the ARRANGEMENT selection to change the displayed satellite positioning.
Set the screen so that the displayed satellite positioning reflects the actual pattern being used.
An error screen will be displayed if a different positioning pattern is set. In this case, reset the
displayed satellite positioning to the correct pattern.
Select POSITION to change the location of satellites on the positioning display.
Set so that the satellite (main) positioning locations and the displayed locations are the same.
Any duplication in satellite positioning will result in an error screen.
Reset the displayed satellite positioning to the correct pattern if an error screen is displayed.
It will not be possible to return to the Game Play screen if the satellite has been used to perform
the main settings.
1
2
3
4
5
6
7
8
− 32 −
Advertisement
Table of Contents
