Lever Unit 39~40; Adjusting The Volume - Sega Airline Pilots Owner's Manual

9. LEVER UNIT
In order to prevent electric shock and short circuit, be sure to turn off the power
before performing work on the interior parts of the product.
Be careful not to damage wiring. Damaged wiring can cause electric shock or short
circuit.
Do not touch places other than those specified. Touching unspecified places can
cause an electric shock or short circuit.
If the value movements of the Lever are Irregular, adjust or replace the Volume in the following procedure.

9 - 1 ADJUSTING THE VOLUME

1
Remove the 4 screws to loosen the
Lever Cover. Take out the 2 screws
and remove the Shift Cover Lower.
2
The Volume Brackets can be moved
by loosening the 2 screws securing
each.
3
By moving the Volume Bracket,
disengage ADJUST GEAR mesh.
Move the Volume Shaft in the
manner so that the cut portion of the
Volume Shaft faces opposite the
center of the ADJUST GEAR.
4
Mesh gears and fasten the 2 screws.
5
Carefully move the Lever forward
& backward, and check to ensure
that the Volume range is not
exceeded.
6
After making adjustments, be sure
to perform Volume setting in the
TEST mode.