13. REPLACING THE FLUORESCENT LAMP
When performing the work, be sure to turn power off. Working
with power on can cause an electric shock or short circuit acci-
dent.
The Fluorescent Lamp, when it gets hot, can cause burns. Be
very careful when replacing the Fluorescent Lamp.
To perform work safely and securely, be sure to use a step which is in a
secure and stable condition. Not using a step or using an unstable step can
cause violent falling accidents.
13 -1 METHOD OF REPLACEMENT
Take out the 2 Truss Screws and remove the Plate Holder.
1
Lower the Billboard Plate and replace the Fluorescent Lamp.
2