Assembly And Installation - Sega Airline Pilots Owner's Manual

4 . ASSEMBLING AND INSTALLATION
-Assembling should be performed as per this manual. Since this is a
complex machine, erroneous assembling may cause damage to the
machine, or malfunctioning to occur.
-When assembling, be sure to perform work by plural persons.
Depending on the assembly work, there are some cases in which
performing the work by a single person can cause personal injury or
parts damage.
-Be careful so as not to damage wirings. Damaged wiring can cause
electric shock and short circuit hazards.
When carrying out the assembly work, follow the procedure in the following 5-item sequence:
1
ASSY OF BILLBOARD
2
SECURING IN PLACE (ADJUSTER ADJUSTMENT)
3
POWER SUPPLY
4
ASSEMBLING CHECK
Note that the tools such as a phillips screwdriver and wrench for M16 hexagon bolt w/24 mm width
across flats are required for the assembly work.
1
ASSY OF BILLBOARD
Due to its large size, it is very difficult for one person alone to install the billboard,
Make sure 2 or more persons are available to perform this work. Attempting to
perform the installation alone can cause an accident.