®
Direction indicator
NORMAL
L
R The shuttle will move to the direction indicated by the lamp .
••••
t>
ABNORMAL
If
both Land
R lamps are flashing, it is indicating that the shuttle has
L
R been stopped by the over load. Clear the causes and place the carriage
, I " , I "
on the right side of the knitting work and restart.
-
...•
~-
,
I
'
'
,
(Push S/S switch (Foot switch), L lamp light. Then push S/S switch
I
(Foot switch) again so the shuttle starts the operation.)
L
R
If
L lamp is flashing, it is indicating that the yarn is run out or the
, I ,
speed change knob is not shifted correctly. Thread the yarn or
-
...•
-
t>
shift the knob correctly then push S/S switch (Foot Switch).
,
I
,
R
If
the Land
R lamps light alternately,
it is indicating that the shuttle has
L
been stopped by the row counter.
If
you want to continue the operation,
~
~ set the number on the row counter and push S/S switch (Foot Switch)
twice.
*
Foot Switch (See P.15)
@ Speed change knob
You can select the operation
speed high (H) or low (L) by speed change knob.
Do not shift the change knob when the motor runs.
It is easy to shift the change knob if you move the shuttle by hand.
~
•.•
7
L
H ._.~
-13-
Need help?
Do you have a question about the KE100 Motor Drive and is the answer not in the manual?