Assembling The Belt Cover; Initial Setting Of The Operation Range Sensor; Assembling The Coupler - Brother KE100 Motor Drive User Manual

o
Assembling the belt cover
Insert the belt cover by adjusting the pin
and groove of the belt cover, and fasten
other end by the bolt.
pin
Screw D ~
Washer A ~
III~
I
i:'JA
Initial setting of the operation range sensor which is inside of the motor head '" (You have to do this setting before operating the motor driving unit.)
IT]
Move the shuttle to the right end by hand until it will stop.
[2J
Then move it to the left end until it will stop.
~ Return the shuttle to the right end so the operation range sensor
will be set correctly.
~r:
====-
ibr1:~;·~,·,
~I~' ~"
~I
\ ....; \ o ~-'
!
8
e
Assembling the coupler
By tilting the coupler, insert it into the slots of the
shuttle. The coupler will be straight to the shuttle
by the spring after assembling.
i
\
ShOT
Coupler
I
Spring pressure
-6-