Assembling The Yarn Tension Unit - Brother KE100 Motor Drive User Manual

4D
Assembling the yarn tension unit
(
You can use the ordinary yarn tension unit for the motor drive unit. When you have the
machine except KH-230, you are advised to use the yarn tension unit head of KE-100.
When you have KH-230, you need to purchase take-up spring to use yarn tension unit
head of KE-100 .
• How to change the yarn tension unit head
Yarn tension rod
[2] Put the take-up springs into the yarn
tension unit head of KE-1 00 and insert it
to the rod reversely.
You can select the
knot sensor
depending on the
thickness of yarn.
~)
wtJ
!!J
~
l1J
Pass the yarn tension rod through the
stabilizer and set it to the machine.
Then, fasten the bolt in order of the
illustration.
Yarn tension unit head
~ Turn the rear yarn guide to the opposite
side.
OJ
Remove the yarn tension unit head of
the knitter from the rod and pull out the
take-up springs.
Rear yarn
guiCJe
-10-