Installing The Knitting Machine; Assembling The Motor Stop Sensor And Tension Rod Stabilizer - Brother KE100 Motor Drive User Manual

Make sure that the disc
of the table clamp gets
into the holder of the stand.
~ Installing the knitting machine
Always use the table clamps for KR to set the knitting machine to
the stand regardless with or without use of ribbing attachment.
* If you do not have ribbing attachment, you have to get
the table clamps for your machine. The table clamps are
available as an OPTIONAL PARTS . .....-.
~ Assembling the motor stop sensor and tension rod stabilizer
r-
IT]
Loosen the screw.
[2J
Put the motor stop sensor
together with the tension rod
stabilizer by the bolt A.
Tension rod
stabilizer
Motor stop
sensor
Hexagonal
bar wrench Loosen
~::::Jt
[8] Insert the plug of motor stop sensor into
the left end connector.
-9-