Assa Abloy Yale inTouch Installation And Programming Instructions page 16

Set Up Supervisor Codes
1. Touch the screen with the palm of your hand or fingers to acitivate
2. Enter the 6-digit Master PIN code followed by the
Lock Response: "Menu mode, enter number, press the
3. Enter "2" followed by the
4. Enter "1" followed by the
5. Enter the Supervisor number to register (00-19) followed by the
6. Enter a 4-12 digit PIN code for the Supervisor number followed by the
7. Press the
Feature Programming Through Supervisor Code
1. Touch the screen with the palm of your hand or fingers to activate.
2. Enter the 4-12 digit Supervisor PIN code followed by the
Lock Response: "Menu mode, enter number, press the
3. Enter digit corresponding to the function to be performed followed by the
Follow the verbal commands.
4. Press the
1 2
S
To Set Up User Codes
User Codes can only be programmed through Supervisor Code.
1. Touch the screen with the palm of your hand or fingers to acitivate
2. Enter the 4-12 digit Supervisor PIN code followed by the
Lock Response: "Menu mode, enter number, press the
3. Enter "1" followed by the
4. Enter "1" again, followed by the
5. Enter the User number to be registered (01-49) followed by the
6. Enter a 4-12 digit PIN code for the User number followed by the
7. Press the
An ASSA ABLOY Group brand
key.
key.
key to complete the process and conclude the programming session.
key to complete the process and conclude the programming session.
3
Register User Code
Group User Lockout Mode
User Code Lockout Mode
Passage Mode
Silent Mode
key.
key.
key to complete the process and conclude the programming session.
key.
key to continue."
key.
key.
key to continue."
U
Register
Delete
Enable
Disable
Enable
01-49
Disable
01-49
Enable
Disable
Enable
Disable
key.
key to continue."
key.
key.
.
key.
key.
4
01-49
.
P/N 80-9150-0065-010 Rev B
16