Association Table Group ID Maximum Nodes Description Commands Command_Class_Battery, Battery_Report ; Command_Class_Notification, Notification_Report; Lifeline Command_Class_Configuration, Configuration_Report; Command_Class_Device_reset_locally, Device_Reset_locally_notification Notifications Table Alarm Alarm Reports Alarm Level Description type 0x00 Master code was changed at keypad Master Code changed. 0xFB Master code was changed over RF 0x70 0x(01-max User added...
Page 5
was reset over RF with a value of 0x02; reserved for 0x02 future use 0xA9 0x (Current %) Too Low to operate (Starting at 3.8V) Low Battery 0xA8 0x (Current %) Critical Battery Level (Starting at 4.0V) Alarms** Low Battery 0xA7 0x (Current %) (Starting at 4.2V)
Configurable Parameters Configuration Parameter Size Description Parameters Number Level control, 1 = High Volume, 3 = Silent. Default is 1 Silent mode on/off 1 1 byte or High Volume Auto Relock on/off 2 1 byte 0x00 = OFF, 0xFF = ON default is 0x00 or OFF Auto Relock time 3 1 byte 10 to 180 seconds default is 30 seconds...
Page 7
® ® Yale Real Living Z -Wave Plus Module ® Installation and Programming Instructions ® Installing the Z -Wave Plus Module IMPORTANT: the batteries must be removed prior to removing and/or inserting the network module: • Remove battery cover and batteries. •...