Vertical Navigation Direct To - Garmin G1000 NXI Cockpit Reference Manual

1) Select the 'Map - Navigation Map' Page.
2) Press the MENU Key.
3) Turn the FMS Knob to highlight 'Show VSD' and press the ENT Key.
4) Press the Map opt Softkey.
5) Press the Inset Softkey.
6) Press the VSD Mode softkey to choose between auto, FPL, or TRK.
disabling the Vertical Situation display:
1) Select the 'Map - Navigation Map' Page.
2) Press the Map opt Softkey.
3) Press the Inset Softkey.
4) Press the off Softkey.
or:
1) Select the 'Map - Navigation Map' Page.
2) Press the MENU Key.
3) Turn the FMS Knob to highlight 'Hide VSD' and press the ENT Key.

VERTICaL NaVIGaTIoN dIRECT To

activating a vertical navigation direct-to:
1) Press the FPL Key for the MFD to display the 'FPL - Active Flight Plan' Page.
2) Press the FMS Knob to activate the cursor and turn the large FMS Knob to highlight the
desired waypoint.
3) Press the VNV ¯ Softkey; or press the MENU Key, highlight 'VNV Direct-To', and press
the ENT Key. An 'Activate vertical Direct-to to: NNNNNFT at XXXXXX?' confirmation
window is displayed.
4) Press the ENT Key. Vertical guidance begins to the altitude constraint for the selected
waypoint.
5) Press the FMS Knob to remove the flashing cursor.
Removing a VNV altitude constraint:
1) Press the ¯ Key to display the 'Direct To' Window.
2) Press the MENU Key.
3) With 'Clear Vertical Constraints' highlighted, press the ENT Key.
Viewing available procedures at an airport:
1) From the 'WPT - Airport Information' Page (first page in the WPT group), press the dP,
STaR, or aPR Softkey.
190-02622-00 Rev. A Garmin G1000 NXi Cockpit Reference Guide for the da62
Flight Management
PRoCEdURES
53