Nav Operation; Nav Radio Selection And Activation; Adf/Dme Tuning - Garmin G1000 NXI Cockpit Reference Manual

Diamond da62 system software version 2056.10 or later
Hide thumbs Also See for G1000 NXI:
Table of Contents

Advertisement

Nav/Com/XPdR/audio
3) Turn the large FMS Knob to highlight the Channel Spacing Field in the COM
Configuration Box.
4) Turn the small FMS Knob to select the desired channel spacing.
5) Press the ENT Key to complete the channel spacing selection.

NaV oPERaTIoN

NaV RadIo SELECTIoN aNd aCTIVaTIoN

Manually tuning a NaV frequency:
1) Turn the NaV Knob to tune the desired frequency in the NAV Tuning Box.
2) Press the Frequency Transfer Key to transfer the frequency to the NAV Active Frequency
Field.
3) Adjust the volume level with the NAV VoL/Id Knob
4) Press the NAV VoL/Id Knob to turn the Morse code identifier audio on and off.
auto-tuning a NaV frequency from the WPT and NRST Pages:
1) From any page the NAV frequency can be auto-tuned, activate the cursor by pressing the
FMS Knob or the appropriate softkey.
2) Turn the FMS Knob to place the cursor on the desired NAV identifier or NAV frequency.
3) On the Nearest VOR and Nearest Airports pages, press the FREQ Softkey to place the
cursor on the NAV frequency.
4) Press the ENT Key to display the 'Load Frequency' Window.
5) Turn the FMS Knob to place the cursor on the desired NAV frequency field.
6) Press the ENT Key to load the NAV frequency into the selected NAV frequency field.
or:
1) When on the NRST pages, press the MENU Key on the PFD/MFD Controller to display the
page menu.
2) Turn the large FMS Knob to scroll through the menu options.
3) Press the ENT Key to place the cursor in the desired window.
4) Scroll through the frequency selections with the FMS Knob.
5) Press the ENT Key to display the 'Load Frequency' Window.
6) Turn the FMS Knob to select the desired NAV frequency field.
7) Press the ENT Key to load the NAV frequency into the selected NAV frequency field.

adF/dME TUNING

Tuning an adF frequency:
1) Press the adF/dME Softkey to display the 'ADF/DME Tuning' Window.
2) Turn the large FMS Knob to place the selection cursor over the standby ADF frequency
field.
Garmin G1000 NXi Cockpit Reference Guide for the da62
12
.
190-02622-00 Rev. A

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents