Measuring Bearing And Distance; Topography - Garmin G1000 NXI Cockpit Reference Manual

Reviewing information for a special-use or controlled airspace:
1) With the desired map page displayed on the MFD, push the Joystick to display the Map
Pointer and place the Map Pointer on an open area within the boundaries of an airspace.
(As the Map Pointer crosses the airspace boundary, the boundary is highlighted and
airspace information is shown.)
2) Press the ENT Key to display an options menu.
3) 'Review Airspaces' should already be highlighted, if not select it. Press the ENT Key to
display the 'Information' Window for the selected airspace.
4) Press the FMS Knob, the CLR Key, or the ENT Key to exit the 'Information' Window.

MEaSURING BEaRING aNd dISTaNCE

Measuring bearing and distance between any two points:
1) Press the MENU Key (with the 'Map - Navigation Map' Page displayed).
2) Use the FMS Knob to highlight the 'Measure Bearing/Distance' Field.
3) Press the ENT Key. A Measure Pointer is displayed on the map at the aircraft's present
position.
4) Move the Joystick to place the reference pointer at the desired location. The bearing
and distance are displayed at the top of the map. Elevation at the current pointer
position is also displayed. Pressing the ENT Key changes the starting point for
measuring.
5) To exit the Measure Bearing/Distance option, push the Joystick; or select 'Stop
Measuring' from the 'Page Menu' Window and press the ENT Key.

ToPoGRaPHy

displaying/removing topographic data on all MFd pages displaying navigation maps:
1) Press the Map opt Softkey.
2) Press the TER Softkey until 'Topo' is shown on the softkey to display topographic data.
3) Press the TER Softkey until 'Off' is shown on the softkey to remove topographic data from
the navigation map. When topographic data is removed from the page, all navigation
data is presented on a black background.
displaying/removing topographic data on the PFd Inset Map or the HSI Map:
1) Press the Map/HSI Softkey.
2) Press the TER Softkey until 'Off' is shown on the softkey to remove topographic data from
the navigation map. When topographic data is removed from the page, all navigation
data is presented on a black background.
190-02622-00 Rev. A Garmin G1000 NXi Cockpit Reference Guide for the da62
Flight Management
21