Garmin G1000 NXI Cockpit Reference Manual page 52

Flight Management
Creating user waypoints from map pages:
1) Push the Joystick to activate the panning function and pan to the map location of the
desired user waypoint.
2) Press the ENT Key. The 'WPT - User WPT Information' Page is displayed with the capture
d position.
3) Enter a user waypoint name (up to six characters).
4) Press the ENT Key to accept the selected name.
5) If desired, define the type and location of the waypoint in one of the following ways:
Select "RAD/RAD" using the small FMS Knob, press the ENT Key, and enter the two
reference waypoint identifiers and radials into the 'Reference Waypoints' Window
using the FMS Knobs.
or:
Select "RAD/DIS" using the small FMS Knob, press the ENT Key, and enter the
reference waypoint identifier, the radial, and the distance into the 'Reference
Waypoints' Window using the FMS Knobs.
or:
Select "LAT/LON" using the small FMS Knob, press the ENT Key, and enter the
latitude and longitude into the 'Information' Window using the FMS Knobs.
6) Press the ENT Key to accept the new waypoint.
7) If desired, change the storage method of the waypoint to temporary or normal by moving
the cursor to "Temporary" and pressing the ENT Key to check or uncheck the box.
8) Press the FMS Knob to remove the flashing cursor.
9) Press the Go Back Softkey to return to the map page.
Editing User Waypoints
Editing a user waypoint comment or location:
1) With the 'WPT - User WPT Information' Page displayed, press the FMS Knob to activate
the cursor. The cursor is placed in the 'User Waypoint' Box.
2) Use the FMS Knobs to enter the name of the User Waypoint; or turn the large FMS Knob
and scroll to the desired waypoint in the 'User Waypoint List' Box.
3) Turn the large FMS Knob to move the cursor to the desired field.
4) Use the FMS Knobs to make any changes.
5) Press the ENT Key to accept the changes.
6) Press the FMS Knob to remove the flashing cursor.
Changing the user waypoint storage duration default setting:
1) With the 'WPT - User WPT Information' Page displayed, press the MENU Key.
2) Move the cursor to select 'Waypoint Setup', and press the ENT Key.
Garmin G1000 NXi Cockpit Reference Guide for the da62
28 190-02622-00 Rev. A