Vertical Situation Display (Vsd) - Garmin G1000 NXI Cockpit Reference Manual

Flight Management
3) Press the CLR Key. A 'Remove or Revert to published VNV altitude of nnnnnFT?'
confirmation window is displayed.
4) Select 'Revert' and press the ENT Key. The altitude is changed to the navigation
database value.
5) Press the FMS Knob to remove the flashing cursor.
Vertical Speed and Flight Path angle Constraints
Modifying the VS TGT and FPa:
1) Press the FPL Key to display the 'FPL - Active Flight Plan' Page on the MFD.
2) Press the VNV Prof Softkey; or press the MENU Key, highlight 'Select VNV Profile
Window', and press the ENT Key. The cursor is now located in the 'Active VNV Profile'
Box.
3) Turn the FMS Knobs as needed to edit the values.
4) Press the FMS Knob to remove the flashing cursor.

VERTICaL SITUaTIoN dISPLay (VSd)

Constraint Type
AT
(Designated Altitude Constraint)
AT or ABOVE
(Un-designated Altitude Constraint
derived from the database)
AT or BELOW
(Un-designated Altitude Constraint
derived from the database)
Enabling the Vertical Situation display:
1) Select the 'Map - Navigation Map' Page.
2) Press the Map opt Softkey.
3) Press the Inset Softkey.
4) Press the VSd Softkey to enable the Vertical Situation Display.
5) Press the VSD Mode softkey to choose between auto, FPL, or TRK.
or:
Garmin G1000 NXi Cockpit Reference Guide for the da62
52
Numeric Representation
5OOO
FT
5OOO
5OOO
FT
altitude Constraint Icons
altitude Constraint
FT
Icon
190-02622-00 Rev. A