Avidyne Tas600 Traffic - Garmin G1000 NXI Cockpit Reference Manual

Diamond da62 system software version 2056.10 or later
Hide thumbs Also See for G1000 NXI:
Table of Contents

Advertisement

Hazard avoidance
Muting the "TIS Not available" voice alert:
1) Select the 'Map - Traffic Map' Page.
2) Press the TNa Mute Softkey. The status is displayed in the upper left corner of the 'Map -
Traffic Map' Page.
or:
a) Press the MENU Key.
b) Select '''Not Available" Mute On' (shown if TNA muting is currently off) and press the
ENT Key.
Switching between TIS modes:
1) Select the 'Map - Traffic Map' Page.
2) Press the Standby or operate Softkey to switch between modes. The mode is displayed
in the upper right corner of the 'Map - Traffic Map' Page.
or:
a) Press the MENU Key.
b) Select 'Operate Mode' or 'Standby Mode' (choice dependent on current state) and
press the ENT Key.

aVIdyNE TaS600 TRaFFIC

WaRNING: Do not rely solely upon the display of traffic information for collision
avoidance maneuvering. The traffic display does not provide collision avoidance
resolution advisories and does not under any circumstances or conditions relieve the
pilot's responsibility to see and avoid other aircraft.
TaS Symbol
Garmin G1000 NXi Cockpit Reference Guide for the da62
98
TaS Symbol description with GTX 335R Transponder
description
Non-Threat Traffic
Proximity Advisory (PA)
Traffic Advisory (TA)
Traffic Advisory Off Scale
190-02622-00 Rev. A

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents