Summary of Contents for Garmin Beechcraft 200 Series
Page 1
® Cockpit Reference Guide Beechcraft 200/B200 Series System Software Version 2286.07 or later...
Page 3
FLIGHT INSTRUMENTS ENGINE INDICATION SYSTEM (EIS) NAV/COM/TRANSPONDER/AUDIO PANEL FLIGHT MANAGEMENT SYSTEM HAZARD AVOIDANCE AUTOMATIC FLIGHT CONTROL SYSTEM ADDITIONAL FEATURES ABNORMAL OPERATIONS ANNUNCIATIONS & ALERTS APPENDIX INDEX...
Page 5
Garmin. Garmin hereby grants permission to download a single copy of this manual and of any revision to this manual onto a hard...
Page 6
AC-U-KWIK Organizations from any cause of action, claims or losses related to any actual or alleged inaccuracies in the information arising out of Garmin’s use of the information in the datasets. Some jurisdictions do not allow the limitation or exclusion of implied warranties or liability for incidental or consequential damages so the above limitations or exclusions may not apply to licensee.
Page 7
Due to time delays inherent in gathering and processing weather data for data link transmission, the weather information shown by the data link weather product may be older than the indicated weather product age. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 8
Refer to documentation from the lightning detection system manufacturer for detailed information about the system. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 9
Garmin service center. Unauthorized repairs or modifications could void both the warranty and affect the airworthiness of the aircraft. NOTE: Intruder aircraft at or below 500 ft. AGL may not appear on the Garmin SVT display or may appear as a partial symbol.
Page 10
If one or more of the sensed values are unavailable, the annunciation indicates no comparison is possible. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 11
Navigation Database coding specific to each procedure. NOTE: The FAA has asked Garmin to remind pilots who fly with Garmin database-dependent avionics of the following: • It is the pilot’s responsibility to remain familiar with all FAA regulatory and advisory guidance and information related to the use of databases in the National Airspace System.
Page 12
NOTE: Operate G1000 NXi system power through at least one cycle in a period of four days of continuous operation to avoid an autonomous system reboot. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 13
It is not intended to be a comprehensive operating guide. Complete operating procedures for the system are found in the Pilot’s Guide for this aircraft. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 14
Warnings, Cautions & Notes Blank Page Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 15
(“THE GARMIN PRODUCT”), YOU AGREE TO BE BOUND BY THE TERMS AND CONDITIONS OF THE FOLLOWING SOFTWARE LICENSE AGREEMENT. PLEASE READ THIS AGREEMENT CAREFULLY. Garmin Ltd. and its subsidiaries (“Garmin”) grants you a limited license to use the software embedded in the Garmin Product (the “Software”) in binary executable form in the normal operation of the Garmin Product.
Page 16
Software License Agreement Blank Page Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 17
- Updated layout to match PG layout May 2019 Initial Release at GDU 20.84 - Added changes from GDU 20.83 to GDU 20.84 - Added legacy hardware - Editorial Updates 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series RR-1...
Page 18
Record of Revisions Blank Page RR-2 Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Smart Airspace ........................41 DIRECT-TO-NAVIGATION ....................41 FLIGHT PLANNING ......................44 Flight Plan Views ........................44 Creating a Flight Plan ......................46 Flight Plan Waypoint and Airway Modifications ............. 47 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 20
Weather Mapping and Interpretation ................108 Ground Mapping and Interpretation ................115 Additional Weather Radar Displays .................. 116 TAWS-B ..........................117 Relative Terrain Symbology ....................117 TAWS-B Alerts ........................119 Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 21
SATELLITE TELEPHONE AND TEXT MESSAGING (SMS) ...........148 ® Registering with Garmin Connext ................. 148 Disable/Enable Iridium Transceiver .................. 148 Telephone Communication ....................149 Text Messaging (SMS) ......................153 WIFI CONNECTIONS .......................159 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 22
Reversionary Sensor Annunciations ................. 178 QFE Annunciations ........................ 179 AFCS Alerts ..........................179 Weather Radar System Status ................... 180 TAWS-B Alerts ........................181 TAWS-B System Status Annunciations ................183 Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 23
Aviation Symbols ........................236 Airspace Symbols ........................237 Airways Symbols ........................238 Active Flight Plan Leg Type Symbols ................238 Miscellaneous Symbols ....................... 239 INDEX ........................Index-1 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 24
Table of Contents Blank Page Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
4) Turn the small FMS Knob to highlight the desired format. ’Single Cue’ to display Command Bars as a single cue. ’X Pointer’ to display Command Bars as a cross-pointer. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 26
1) Press the PFD Opt Softkey to display the second-level softkeys. 2) Press the STD Baro Softkey; STD BARO is displayed in barometric setting box. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 27
7) Turn the large FMS Knob to highlight the ‘On’ or ‘Off’ field for the BARO Transition Alert Level. 8) If desired, turn the small FMS Knob to set the BARO Transition Alert Flight Level On or Off. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 28
4) Turn the large FMS Knob to select the ‘REF’ field in the BARO QFE Box. 5) Use the small FMS Knob to select ‘Manual’ or ‘FMS DEST’, and press the ENT Key to accept. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 29
Press the Map Off Softkey to disable the HSI Map. Adjusting the Selected Heading: Turn the HDG Knob to set the Selected Heading. Press the HDG Knob to synchronize the bug to the current heading. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 30
• Pressing the HDG SYNC Bug softkey to synchronize the heading to the current selected heading • Pressing the TRACK SYNC softkey to synchronize the heading to the current track Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 31
5) Turn the small FMS Knob clockwise to On or counterclockwise to Off. 6) To cancel the selection, press the FMS Knob or the CLR Key. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
3) Press the Terrain Softkey. The SVT display will cycle on or off with each press of the Terrain Softkey. 4) Press the Back Softkey twice to return to the top-level softkeys. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 33
‘Field of View’. 5) Turn the small FMS Knob to select ‘On’ or ‘Off’. 6) Press the FMS Knob to return to the ‘Map - Navigation Map’ page. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
• Option 2: Wind direction arrow with true digital direction and speed • Option 3: Wind direction arrows with headwind, tailwind, and crosswind speed components 4) To remove the window, press the Off Softkey. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
The ‘RA TEST’ annunciation is displayed above the RA box. To cancel the test, press the RA TEST Softkey again, or turn the FMS Knob to exit the AUX - System Status Page. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 36
Flight Instruments Blank Page Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
NOTE: The gauges displayed and the values shown in this section are taken from an example Beechcraft 200/B200 configuration. Refer to the flight manual for specific values and operating limitations. (Normal Mode) (Reversionary Mode) 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 38
A red triangle represents the maximum oil transient pressure at 200 psi. Oil Temperature Displays the oil temperature in degrees Celsius (°C) Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
1) From any page that the COM frequency can be auto-tuned, activate the cursor by pressing the FMS Knob or pressing the appropriate softkey. 2) Turn the FMS Knob to place the cursor on the desired COM frequency. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
(large knob for MHz; small knob for kHz). Press the numeric keys on the keypad to enter a Frequency. 4) Press the Frequency Transfer Key to transfer the frequency to the active field. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
3) Press the desired softkey to activate the transponder mode. The ON indication and transponder code in the Transponder Data Box will appear green while airborne and white while on the ground. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 42
5) Press the ENT Key to complete code digit entry. Entering a transponder code with the PFD/MFD Controller: 1) Press the XPDR Key to select the transponder code field. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
NOT lit that position is isolated from the others. The CREW ICS Key is shared betweeen the Audio Panels for ICS distribution. The PASS ICS Key is not shared betweeen the Audio Panels for ICS distribution. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 44
Onside Radios Pilot MIC Copilot MIC Aural Alerts Aural Alerts Passenger MIC Copilot MIC Pilot MIC Pilot Selected Radios Passenger MIC Passenger MIC Copilot Selected Radios Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
CREW ICS Annunciator will turn BLUE. All audio heard by the Pilot will be recorded. Press and hold the CREW ICS Button to enable/disable Bluetooth Recording mode. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
3) Use the Blue-Select Mode to distribute TEL, MUS1, and MUS2 appropriately. 4) Use the VOL/SQ Knob to adjust the intercom volumes to the desired level. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 48
Nav/Com/XPDR/Audio Panel Blank Page Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
‘Map Settings’ option. 2) Press the ENT Key. The ‘Map Settings’ Menu is displayed. 3) Select the ‘Map’ group. 4) Press the ENT Key. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
2) Move the Joystick to move the Map Pointer around the map. 3) Press the Joystick to remove the Map Pointer and recenter the map on the aircraft’s current position. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
5) To exit the Measure Bearing/Distance option, press the Joystick; or select ‘Stop Measuring’ from the ‘Page Menu’ Window and press the ENT Key. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
‘Map Settings’ option. 2) Press the ENT Key. The ‘Map Settings’ Menu is displayed. 3) Turn the small FMS Knob to select the ‘Map’ group. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 53
8) Repeat steps 5-7 as necessary. 9) Press the FMS Knob to return to the ‘Map - Navigation Map’ Page. Decluttering the MFD navigation map: 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
6) Select the desired range using the small FMS Knob. 7) Press the ENT Key. 8) Press the FMS Knob to return to the ‘Map - Navigation Map’ Page. ADDITIONAL NAVIGATION MAP ITEMS Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
2) Turn the large FMS Knob to place the cursor in the ‘Runways’ Box, on the runway designator. 3) Turn the small FMS Knob to display the desired runway (if more than one) for the selected airport. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 56
5) Press the FMS Knob to remove the flashing cursor. Viewing runway information for a specific airport: 1) With the ‘NRST - Nearest Airports’ Page displayed, press the RNWY Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
6) Press the FMS Knob to remove the flashing cursor. Viewing Nearest Non-Airport Waypoints: 1) Turn the large FMS Knob to select the ‘NRST’ Page Group. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 58
FMS Knobs. 5) Press the ENT Key to accept the new waypoint. 6) If desired, change the storage method of the waypoint to temporary by Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 59
3) Select the point in the flight plan before which to add the new user waypoint. The new waypoint is placed directly in front of the highlighted waypoint. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 60
1) Push the Joystick to activate the panning function and pan to the map location of the desired user waypoint. 2) Press the ENT Key. The ‘WPT - User WPT Information’ Page is displayed with the captured position. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 61
4) Use the FMS Knobs to make any changes. 5) Press the ENT Key to accept the changes. 6) Press the FMS Knob to remove the flashing cursor. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 62
4) Turn the FMS Knob to highlight ‘Delete User Waypoints’. 5) Press the ENT Key twice to confirm the selection. 6) Press the FMS Knob to remove the flashing cursor. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
4) Turn the small FMS Knob clockwise to turn the airspace alert On or counterclockwise to turn the alert Off. 5) Press the FMS Knob to remove the flashing cursor. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 64
Window’, and press the ENT Key. The cursor is placed in the ‘Airspace Alerts’ Box. 3) Select the desired airspace. 4) Press the FMS Knob to remove the flashing cursor. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
2) Turn the small FMS Knob counter-clockwise to display a list of flight plan waypoints (the FPL list is populated only when navigating a flight plan). 3) Select the desired waypoint. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 66
1) Press the Nearest Softkey on the PFD; or turn the FMS Knob to display the ‘NRST - Nearest Airports’ Page on the MFD and press the FMS Knob. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 67
6) Press the ENT Key again to activate the direct-to. Cancelling a Direct-to: 1) Press the Direct-to Key to display the ‘Direct-To’ Window. 2) Press the MENU Key. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Leg-Leg Softkey to view leg-to-leg waypoint distance. 4) Press the Wide Softkey to display the wide view, or press the Narrow Softkey to display the narrow view. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 69
4) Press the MENU Key. ‘Show Flight Plan Map’ is highlighted. Press the ENT Key. 5) To removed the Flight Plan Map, press the MENU Key and select ‘Hide Flight Plan Map’. Press the ENT Key. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
3) Press the New Softkey; or press the MENU Key, highlight ‘Create New Flight Plan’, and press the ENT Key to display a blank flight plan for the first empty storage location. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
The new waypoint is placed directly in front of the highlighted waypoint. 4) Turn the small FMS Knob to display the ‘Waypoint Information’ Window. (Turning it clockwise displays a blank ‘Waypoint Information’ Window, 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 72
6) Enter the identifier, facility, or city name of the waypoint or select a waypoint from the submenu of waypoints and press the ENT Key. The new waypoint now exists in the flight plan. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 73
Key. The ‘Set <waypoint> to be a fly-over waypoint?’ Window is displayed. 4) With ‘OK’ highlighted, press the ENT Key. To cancel the request, press the CLR Key, or highlight ‘Cancel’ and press the ENT Key. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 74
4) Turn the large FMS Knob to highlight the waypoint after the desired airway entry point. If this waypoint is not a valid airway entry point, a valid entry point should be entered at this time. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 75
ENT Key. The ‘FPL - Stored Flight Plan’ Page is displayed. 5) Turn the large FMS Knob to highlight the white header of the airway to be removed. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
3) Press the ACT Leg Softkey (MFD only); or press the MENU Key, highlight ‘Activate Leg’, and press the ENT Key. A confirmation window is displayed with ‘Activate’ highlighted. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 77
CLR Key to cancel the parallel track activation. Cancelling parallel track: 1) Press the FPL Key to display the ‘FPL - Active Flight Plan’ Page (MFD) or the Active ‘Flight Plan’ Window (PFD). 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
8) Use the small FMS Knob to select ‘Right’ or ‘Left’ turn direction, and press the ENT Key. 9) Use the FMS Knobs to edit the Expect Further Clearance Time (EFC Time), and press the ENT Key. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 79
6) Use the small FMS Knob to select ‘Right’ or ‘Left’ turn direction, and press the ENT Key. 7) Use the FMS Knobs to edit the Expect Further Clearance Time (EFC TIME), and press the ENT Key. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
2) Press the CLR Key to remove the pop-up alert and ignore the pending flight plan. The pending flight plan will still be available on the ‘FPL - Flight Plan Catalog’ Page. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 81
3) Press the ENT Key to display the ‘FPL - Preview Flight Plan’ Page on the MFD. 4) Press the Activate Softkey. The ‘Activate Flight Plan?’ window is displayed. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 82
3) Turn the small FMS Knob to select the ‘FPL - Flight Plan Catalog’ Page. 4) Press the FMS Knob to activate the cursor. 5) Turn either FMS Knob to highlight an empty or existing flight plan. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 83
Deleting the active flight plan: 1) Press the FPL Key to display the ‘FPL - Active Flight Plan’ Page (MFD) or the Active ‘Flight Plan’ Window (PFD). 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 84
1) Press the FPL Key and turn the small FMS Knob to display the ‘FPL - Flight Plan Catalog’ Page. 2) Press the FMS Knob to activate the cursor, and turn the FMS Knob to highlight the desired flight plan. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 85
2) Press the FMS Knob to activate the cursor, and turn the FMS Knob to highlight the desired flight plan. 3) Open the ‘Delete flight plan XX?’ window: Press the Delete Softkey. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 86
2) Press the FMS Knob to activate the cursor and turn the FMS Knob to highlight the flight plan to be edited. 3) Open the ‘FPL - Stored Flight Plan’ Page: Press the Edit Softkey. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
3) Press the VNV Direct-To Softkey; or press the MENU Key, highlight ‘VNV Direct-To’, and press the ENT Key. An ‘Activate vertical Direct-to to: NNNNNFT at XXXXXX?’ confirmation window is displayed. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Restriction Bar Altitude Constraint Examples 23OO 5OOO 3OOO Cross AT or BELOW Cross AT or ABOVE Temperature Compensated Cross AT 2,300 ft 3,000 ft 5,000 ft Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 89
1) Press the FPL Key on the MFD to display the ‘FPL - Active Flight Plan’ Page. 2) Press the FMS Knob, and turn to highlight the desired waypoint altitude constraint. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 90
3) Turn the small FMS Knob to begin entry of the altitude constraint, and use the FMS Knobs to enter the constraint in reference to Baro QFE. If modifying an existing Baro QFE altitude constraint, turning the small FMS Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
4) Turn the small FMS Knob to view the available procedures. Press the ENT Key to select the procedure. The cursor moves to the next box (runway or transition). The procedure is previewed on the map. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Turn the small FMS Knob to view the available departures. Press the ENT Key to select the departure. The cursor moves to the ‘Runway’ Box. The departure is previewed on the map. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 93
3) Press the ENT Key. A confirmation window is displayed listing the departure procedure. 4) With ‘OK’ highlighted, press the ENT Key. To cancel the removal request, highlight ‘CANCEL’ and press the ENT Key. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 94
6) With ‘OK’ highlighted, press the ENT Key. To cancel the request, press the CLR Key, or highlight ‘CANCEL’ and press the ENT Key. 7) Press the FMS Knob to remove the flashing cursor. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Key to select the runway. The cursor moves to the ‘Sequence’ Box. The arrival is previewed on the map. 4) Press the MENU Key to display the Arrival Information ‘Page Menu’ Window. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 96
4) Press the EDIT Softkey; or press the MENU Key, select ‘Edit Flight Plan’ and press the ENT Key. The ‘FPL - Stored Flight Plan’ Page is displayed. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Instead, the system calculates the lateral and vertical path for the chosen runway and creates visual approach waypoints based on runway position and course as specified in the navigation database. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 98
With ‘OK’ highlighted, press the ENT Key. 7) The message ‘Obstacle clearance is not provided for visual approaches’ is displayed. Press ENT to continue. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 99
Load approach?’ is displayed. With ‘Yes’ highlighted, press the ENT Key. When a visual approach is selected, the message ‘Obstacle clearance is not provided for visual approaches’ is displayed. With ‘OK’ highlighted, press the ENT Key. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 100
Load approach?’ is displayed. With ‘Yes’ highlighted, press the ENT Key. When a visual approach is selected, the message ‘Obstacle clearance is not provided for visual approaches’ is displayed. With ‘OK’ highlighted, press the ENT Key. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 101
1) From the ‘PROC - Approach Loading’ Page, press the MENU Key. The ‘Page Menu’ Window is displayed with ‘Load & Activate Approach’ highlighted. 2) Press the ENT Key. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 102
1) Press the FPL Key to display the ‘FPL - Active Flight Plan’ Page (MFD) or the ‘Flight Plan’ Window (PFD). 2) Press the FMS Knob, and turn to highlight the approach header in the active flight plan. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 103
MAP before executing the missed approach. Otherwise, the aircraft automatically sequences to the MAHP. Fly past the MAP, and press the SUSP Softkey on the PFD. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 104
5) Turn the small FMS Knob to enter the minimums altitude. Press the ENT Key. The cursor is placed in the ‘TEMP AT <destination airport>’ Field. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
ENT Key. The cursor moves to the second waypoint field. 3) Turn the FMS knobs to select the desired waypoint, and press the ENT Key. The statistics for the selected leg are displayed. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
2) Turn the small FMS Knob to enter the number of passengers. 3) Press the ENT Key to confirm the entry. 4) Press the FMS Knob to remove the flashing cursor. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 107
2) Turn the small FMS Knob to enter the fuel reserves amount. 3) Press the ENT Key to confirm the entry. 4) Press the FMS Knob to remove the flashing cursor 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
• ‘RAIM Available’—RAIM is predicted to be available for the specified waypoint, time, and date • ‘RAIM not Available’—RAIM is predicted to be unavailable for the specified waypoint, time, and date Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
3) Press the FMS Knob, and turn the large FMS Knob to highlight ‘EGNOS’, ‘MSAS’ or ‘WAAS’. 4) Press the ENT Key to uncheck the box. 5) Press the FMS Knob to remove the cursor. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 110
Flight Management Blank Page Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
3) Note the Data Radio ID (for SiriusXM Weather data) and/or the Audio Radio ID (for SiriusXM Satellite Radio). 4) Contact SiriusXM customer service through the phone number listed on its website, www.siriusxm.com. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 112
‘Aux - System Status’ Page. Then go to the website www.flygarmin.com and follow the instructions for establishing an account for Garmin Connext data services. After an account has been established, Garmin provides an access code that must be entered and successfully transmitted to the Garmin Connext service via the Iridium satellite network.
Hazard Avoidance 5) Press the ENT Key. 6) Enter the access code provided by Garmin in the ‘Access Code’ field. 7) Press the ENT Key. ‘Register’ is highlighted. 8) Press the ENT Key. The system contacts Garmin through the Iridium network.
Page 114
Temporary Flight Restrictions (TFRs) Terminal Aerodrome Reports (TAFs) no product symbol Expiration Time FIS-B Weather Product Symbol (Minutes) NEXRAD Composite (US) NEXRAD Composite (Regional) Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 115
Expiration Time Garmin Connext Weather Symbol (Minutes) Product Connext Radar Cloud Tops Connext Lightning SIGMETs AIRMETs Meteorological Aerodrome Report (METARs) 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
2) Press the Legend Softkey to display the legends for the displayed weather products. a) Press the MENU Key. b) Select ‘Weather Legend’ and press the ENT Key. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 117
5) If SiriusXM is the selected data link weather source, turn the small FMS Knob to highlight the ‘Map’ Group and press the ENT Key. If FIS-B or Garmin Connext is the selected data link weather source, turn the large FMS Knob to highlight the ‘Orientation‘ field at the bottom of the Product Group 1 list.
Page 118
7) Press the ENT Key to select an option. 8) Press the FMS Knob or CLR Key to return to the Navigation Map Page with the changed settings. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Turn the small FMS Knob to select the desired flight plan look-ahead distance option (or choose ‘Remaining FPL’ to request weather data for the remainder of the flight plan), then press the ENT Key. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 120
Press the ENT Key to immediately send an immediate Connext Data Request. Press the FMS Knob to return to the ‘Map - Weather Data Link (CNXT)’ Page. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
4) Turn the small FMS Knob to select ‘On’ or ‘Off’, then press the ENT Key. 5) To remove the menu, push the FMS Knob or the CLR Key. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 122
Displaying the FIS-B NEXRAD weather product on PFD maps: 1) Press the Map/HSI Softkey. 2) Press the NEXRAD Softkey to enable/disable the display of NEXRAD information. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 123
Displaying Data Link Lightning information on PFD maps: 1) On the PFD, press the Map/HSI Softkey. 2) Press the Lightning Softkey. 3) Press the Datalink Softkey. 4) When finished, press the Back Softkey. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 124
Displaying METAR and TAF text on the MFD: 1) On the ‘Map - Weather Data Link (XM or FIS-B or CNXT)’ Page, press the METAR Softkey. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 125
5) When finished, press the Joystick to remove the Map Pointer. Displaying Surface Analysis and City Forecast information: 1) Select the ‘Map - Weather Data Link (XM)’ Page. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 126
Enabling/disabling winds aloft data display for the VSD: 1) Select the ‘Map - Navigation Map’ Page. 2) Press the MENU Key. 3) With ‘Map Settings’ highlighted, press the ENT Key. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 127
4) Select a softkey for the desired altitude: 21,000 feet up to 45,000 feet. Press the Next or PREV Softkey to cycle through the altitude softkeys. The TURB Softkey label changes to indicate the altitude selection. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 128
Setting up and customizing TFR data for maps on which TFR data can be displayed: 1) Select the ‘Map - Navigation Map’ Page. 2) Press the MENU Key. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
2) Turn the small FMS Knob to select the ‘Map - Stormscope®’ Page. 3) Turn the Joystick clockwise to increase the map range or counter- clockwise to decrease the map range. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
4) Press the Back Softkey twice to return to the top-level softkeys. Manually clearing Stormscope cell or strike information: 1) Select the ‘Map - Stormscope®’ Page. 2) Press the Clear Softkey. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
If precipitation is observed in the Climb departure path, gain can be reduced Altitude to aid in identification of intense Compensated Tilt On returns. Typical Tilt Settings by Phase of Flight 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Black < 23 dBZ < .01. Green 23 dBZ to < 32 dBZ .01 - 0.1. Yellow 32 dBZ to < 41 dBZ 0.1 - 0.5 Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 133
Yellow 39 dBZ or 40 dBZ 41 dBZ or 42 dBZ 43 dBZ or 44 dBZ 45 dBZ or 46 dBZ 47 dBZ or 48 dBZ 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 134
NOTE: Garmin recommends the user obtain instruction in the proper opera- tion of airborne weather radar. When the weather radar system is in the Weather or Ground Map mode, the system automatically switches to Standby mode on landing.
Page 135
8) To select a new area to be vertically scanned, press the Horizontal Softkey to return to the Horizontal Scan view and repeat the previous steps. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 136
3) Press the FMS Knob to remove the cursor. 4) Press the Gain Softkey again to return to the calibrated gain setting. ‘Calibrated’ is displayed in the Gain field. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 137
‘Map - Weather Radar’ Page. Weather Attenuated Color Highlight (WATCH ™ To activate or deactivate the WATCH feature, press the WATCH Softkey. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 138
3) Select the WX ALRT Softkey to enable/disable the Weather Alert Bands and Alerts Window message for severe weather head. 4) Select the Back Softkey to return to the top-level softkeys. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
6) Adjust the antenna tilt angle by turning the small FMS Knob to display ground returns at the desired distance. 7) Press the FMS Knob to remove the cursor. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Softkey to increase the gain setting in increments of 0.5 with each press, or press and hold the softkey for continuous adjustment. A gain setting of 0.0 is equivalent to the calibrated gain setting. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
200 feet above ground level, AGL) present in the databases relative to aircraft altitude. The system dynamically adjusts these colors as the aircraft altitude changes, and after takeoff and landing. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 142
• Obstacle Data – Turns the display of obstacle data on or off and sets maximum range at which obstacles are shown. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
1) Select the ‘Map - TAWS-B’ Page. 2) Press the MENU Key. 3) Turn the FMS Knob to highlight ‘Test TAWS System’ and press the ENT Key to confirm the selection. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Boundary and sets maximum range at which Track Mode Boundary is shown. 6) Turn the small FMS Knob to scroll through options (ON/OFF, range settings). 7) Press the ENT Key to select an option. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
2) Press the TER Softkey to cycle through terrain options. The selected mode is displayed in cyan: Off, Topo, Rel. Press the TER Softkey until ‘Rel’ is displayed on the softkey. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Showing/hiding aviation information on the TAWS-A Page: 1) Press the MENU Key. 2) Select ‘Show Aviation Data’ or ‘Hide Aviation Data’ (choice dependent on current state) and press the ENT Key. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
1) Select the TAWS-A Page. 2) Press the MENU Key. 3) Turn the FMS Knob to highlight ‘Test TAWS System’ and press the ENT Key to confirm the selection. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
NOTE: Refer to the SKYWATCH® (SKY497/SKY899) Pilot’s Guide for a detailed discussion of the TAS. NOTE: If Garmin GTX 345R transponder is installed, refer to the Automatic Dependent Surveillance-Broadcast (ADS-B) Traffic discussion for more information about ADS-B traffic displays.
2) Press one of the following Softkeys: • Above: Displays Other Non-Threat and Proximity Advisory traffic from 9900 feet above the aircraft to 2700 feet below the aircraft. Typically 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 150
2) Press the Traffic Softkey. Traffic is now displayed on the map. Customizing the traffic display on the Navigation Map Page: 1) Select the Navigation Map Page. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
The traffic display does not provide collision avoidance resolution advisories and does not under any circumstances or conditions relieve the pilot’s responsibility to see and avoid other aircraft. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Traffic Advisory out of the selected display range with directional information. Displayed at outer range ring at proper bearing. Traffic Advisory out of the selected display range without directional information. Displayed at outer range ring at proper bearing. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
3) If the optional TAS/TCAS I is installed, ensure the TAS STBY or TCAS STBY Softkey is enabled. 4) Press the Test Softkey. Changing the altitude range: 1) On the Traffic Map Page, press the ALT Mode Softkey. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 154
2) Press the FMS Knob. The first selected traffic symbol is highlighted in cyan. Additional information appears in a window in the upper-right corner of the Traffic Map Page. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Due to lack of equipment, poor signal reception, and/or inaccurate information from other aircraft, traffic may be present but not represented on the displays. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
2) Turn the small FMS Knob to select the Traffic Map Page. 3) Turn the Joystick to set the range to 2/6 nm to allow for full traffic test pattern display. 4) Press the Test Softkey. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
5) Press the TFC STBY Softkey to place the system in the Standby mode. ‘STANDBY’ is displayed in the Traffic mode field. 6) Turn the Joystick clockwise to display a larger area or counter-clockwise to display a smaller area. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 158
2) The following range options are available: • 750 ft • 750 ft and 1500 ft • 1500 ft and 0.5 nm • 0.5 nm and 1 nm Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 159
6) Turn the small FMS Knob to scroll through options (On/Off, range settings, etc.). 7) Press the ENT Key to select an option. 8) Press the FMS Knob or CLR Key to return to the Navigation Map Page. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 160
1) Press the Map Opt Softkey. 2) Press the Traffic Softkey to enable/disable the display traffic information on the Inset Map or HSI Map. 3) When finished, press the Back Softkey. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
NAV or APR Key press activates flight director. ***The selected navigation receiver must have a valid LOC signal before BC Key press activates flight director. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
* No annunciation appears in the AFCS Status Box. The acceptable bank angle range is indicated in green along the Roll Scale of the Attitude Indicator. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
***Level mode can only become activated as a function of Electronic Stability and Protection (ESP). Refer to the Additional Features section for a detailed discussion of the optional ESP feature. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 164
AFCS Blank Page Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
4) Turn the large FMS Knob to scroll through the Aviation Group options to SafeTaxi. 5) Turn the small FMS Knob to display the range of distances. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Selecting terminal procedures charts: While viewing the ‘Map - Navigation Map’ Page, ‘NRST - Nearest Airport’ Page, or ‘FPL - Active Flight Plan’ Page, press the Charts Softkey. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 167
Information Page and all of the chart page selections. Pressing the NOTAM Softkey again removes the NOTAMS information. NOTE: A subdued softkey label indicates the function is disabled. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 168
FMS Knob and press the ENT Key to complete the selection. 5) Press the FMS Knob again to deactivate the cursor. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
These charts will display an Aircraft Not Shown Icon in the lower right corner of the MFD. NOTE: Do not maneuver the aircraft based solely upon the georeferenced aircraft symbol. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 170
Pressing the DP Softkey displays the Departure Procedure Chart if available. Pressing the STAR Softkey displays the Standard Terminal Arrival Chart if available. Pressing the APR Softkey displays the approach chart for the airport if available. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 171
For example, if the value is set to 15%, the day/ night display changes when the display backlight reaches 15% of full brightness. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
1) Turn the large FMS Knob on the MFD to select the ‘Aux’ Page Group. 2) Turn the small FMS Knob to select the ‘Aux - Telephone’ Page. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Phone has a dial tone (off hook) or connected to another phone Phone dialed is busy Phone is dialing another phone Phone has failed Phone status not known 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 174
MFD Controller, or the FMS Knobs on the controller or the MFD. 7) Press the ENT Key. The cursor moves to the ‘Email’ field. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 175
Pressing the Ignore Softkey will extinguish the pop-up window and leave the call unanswered. Pressing the Phone Softkey will display the ‘Aux - Telephone’ Page allowing additional call information to be viewed before answering. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 176
7) Press the ENT Key. The system will begin calling the number. When the phone is answered, the connection is established. To exit the call, press the Hangup Softkey. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
5) Press the ENT Key again to place the call. TEXT MESSAGING (SMS) Viewing the Text Messaging Page: 1) Turn the large FMS Knob on the MFD to select the ‘Aux’ Page Group. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 178
2) Turn either FMS Knob to place the cursor on ‘Disable New Message Popups’ or ‘Enable New Message Popups.’ 3) Press the ENT Key. The pop-up alert will not be displayed when an incoming text message is received. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 179
The cursor is placed in the ‘To’ field. Confirm the contact you wish to send a message to by pressing the ENT Key. 4) Enter the desired message, then press the ENT Key. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 180
2) The Predefined SMS Text Message Window is now displayed with the cursor in the ‘TO’ field. Enter the desired telephone number or email address. Entry can be accomplished through the alphanumeric keys on the Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 181
Time Softkey. Viewing messages sorted by message type: g the ‘Aux - Text Messaging’ Page, press the Arrange Softkey, While viewin then press the Type Softkey. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 182
1) While viewing the Inbox o , press the FMS Knob to activate the cursor. 2) Turn either FMS Knob to select the desired message. 3) Press the Delete Softkey. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Connecting the selected network without saving: a) Turn the large FMS Knob to move the cursor to highlight ‘Connect.’ b) Press the ENT Key. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 184
2) Turn either FMS Knob to highlight the network to be deleted. 3) Press the Delete Softkey. The selected network is removed from the list. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
5) Verify that the desired services are activated. 6) Press the Lock Softkey. 7) Turn the large FMS Knob to highlight YES. 8) To complete activation, press the ENT Key. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Turn the small FMS Knob to display the Categories list. Highlight the desired category with the small FMS Knob and press the ENT Key. Selecting All Categories places all channels in the list. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
NOTE: When the flight plan is modified, data manually entered on the ‘FPL - SurfaceWatch’ Page will be cleared. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Knobs to enter the required takeoff or landing distance. Upon pressing the Knob and committing the required takeoff or landing distance, the Runway Length field will turn amber if an insufficient runway length exists. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Connext Setup Page. The system is ‘discoverable’ whenever this page is displayed. The pairing operation is completed from the mobile device and the Garmin Pilot applica- tion. See the device Bluetooth pairing instructions and the connection instructions in the Garmin Pilot application.
ENT Key. Once the ENT key is pressed on any option, the page menu closes and returns to the ‘Aux - Video’ Page. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
ESP can also be overridden by overpowering the servo’ s mechanical torque limit. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
There are no indications marking the pitch ESP engage and disengage limits in these nose-up/nose-down conditions. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Exceeding Vmo or Mmo will result in ESP applying force to raise the nose of the air- craft. When the high airspeed condition is remedied, ESP force is no longer applied. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 194
Additional Features Blank Page Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
If GPS position is lost, or becomes invalid, selected hazards being displayed on the Navigation Map Page are removed until GPS position is again established. Loss of Hazard Functions with Loss of GPS Position 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
• PFD Setup Menu • Ground Speed • Windows displayed in the lower right • True Airspeed corner of the PFD: – References – Nearest Airports Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
• Distances in the Bearing Information windows • Active Flight Plan distances, bearings, and ETE values The accuracy items should be verified when operating in DR Mode. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 199
Also, while the system is in DR Mode, some terrain functions are not available. Additionally, the accuracy of all nearest information (airports, airspaces, and waypoints) is questionable. Finally, airspace alerts continue to function, but with degraded accuracy. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
The following steps should be added to the preflight check: 1) Check for proper autopilot operation and ensure the autopilot can be overpowered. 2) Note the forces required to overpower the autopilot servo clutches. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
If either airspeed sensor detects > 35 knots, and the difference in sensors is > 10 knots. If either airspeed sensor detects > 80 knots, and the difference in sensors is > 7 knots. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
ON GPS2 PFD2 is displaying data from the #1 Air Data Computer. USING ADC1 PFD1 is displaying data from the #2 Air Data Computer. USING ADC2 Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
If AP engaged, take control of the aircraft and disengage Pitch Trim Failure PTRM If AP disengaged, move MEPT switches separately to (or stuck MEPT Switch) unstick Yaw Damper Failure YD control failure 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
The altitude-compensated tilt feature is selected off. GND CLTR SUPPRESS ON The ground clutter suppression feature is selected on. GND CLTR SUPPRESS OFF The ground clutter suppression feature is selected off. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
No GPS position “TAWS Not TAWS N/A NO GPS POSITION Available” Excessively degraded “TAWS Not GPS signal, or out of None TAWS N/A Available” database coverage area 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Rate Warning (EDR) Excessive Closure “<whoop> <whoop> Pull-Up” Rate Warning (ECR) * Alerts with multiple messages are configurable. Alerts for the default configuration are indicated with asterisks. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 209
(FIT) Flight Into Terrain “Too Low, Gear” Gear Caution (FIT) * Alerts with multiple messages are configurable. Alerts for the default configuration are indicated with asterisks. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
“TAWS System Failure” GPWS System Fail None “GPWS System Failure” System Test in TAWS TEST None progress System Test pass None None “TAWS System Test OK” Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
* VCO alerts are not issued if both TAWS and GPWS systems have failed or are not available. † GSD alert will be available if a valid ILS is being used for navigation, even in no valid GPS signal is being received. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
NO TRFC DATA Data is not being received from the traffic unit * Shown as symbol on Traffic Map Page ** Shown in center of Traffic Map Page Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
System cannot determine bearing of Traffic Advisory**. TA X.X ± XX ↕ Annunciation indicates distance in nm, altitude separation in hundreds of feet, and altitude trend arrow (climbing/descending). 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Status: Last minutes, or station occurred. If no uplink has been received, or the status is Uplink ‘------’ invalid, dashes appear instead of a number of minutes. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Data is being received from the TCAS II unit, but the unit is self-reporting DATA FAILED a failure TCAS FAIL Incorrect data format received from the TCAS II unit 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
CHECK RUNWAY runway” a runway different than that entered by the crew. Issued when the aircraft is landing on a non-runway (e.g. “Taxiway” TWY LANDING a taxiway). Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Some flight plan waypoints were successfully imported from the SD card, however others had errors and were not imported. A partial stored flight plan now exists in the system. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
‘All available crew profiles in use. Displayed if the maximum number for crew profiles has been Delete a profile before importing reached. another.’ Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
KTA 870 TAS system. See the Skywatch PG or KTA 870 PG for additional details on voice alerts. Played for each subsequent TA (KTA 870 only). “Traffic” 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Abort approach. ADC1 ALT EC – ADC1 altitude error GDC1 is reporting that the altitude error correction is correction is unavailable. unavailable. The system should be serviced. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 221
AHRS2 CONFIG – AHRS2 config AHRS #2 configuration settings do not match those of backup error. Config service req’d. configuration memory. The system should be serviced. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 222
COM #[1, 2] INOP - CAL – Check COM 1 and/or COM 2 calibration version error. Check COM COM calibration. calibration. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 223
COM2 SERVICE – COM2 needs The system has detected a failure in COM2. COM2 may still be service. Return unit for repair. usable. The system should be serviced when possible. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 224
Also, check the ‘Aux-System Status’ Page for a database synchronization function not completed. After synchronization is complete, power must be turned off, then on. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 225
The GCU 477 has incorrect software installed. The system mismatch, ommunication halted. should be serviced. GDC1 MANIFEST – GDC1 software The GDC1 has incorrect software installed. The system should mismatch, communication halted. be serviced. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 226
GEA1 CONFIG – GEA1 config error. The GEA1 configuration settings do not match those of backup Config service req’d. configuration memory. The system should be serviced. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 227
GIA2 CONFIG – GIA2 config error. The GIA2 configuration settings do not match backup Config service req’d. configuration memory. The system should be serviced. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 228
The system should be serviced when possible. GMC CNFG – GMC Config error. Error in the configuration of the GMC 710. Config service req’d. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 229
Return unit for repair. serviced. GRA1 TEMP – GRA1 over The GRA temperature is too high. If the problem persists, the temperature. system should be serviced. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 230
A fault has occurred in the #2 GMU 44. Heading is flagged as fault has occurred. invalid. The AHRS uses GPS for backup mode operation. The system should be serviced. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 231
MFD1 CARD 2 REM – Card 2 was The SD card was removed from the bottom card slot of the removed. Reinsert card. specified MFD. The SD card needs to be reinserted. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 232
NAV #[1, 2] INOP - CRNT – NAV 1 and/or NAV 2 current is low. Check COM current. Check COM current. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 233
PFD1 CARD 1 ERR – Card 1 is The SD card in the top card slot of the specified PFD contains invalid. invalid data. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 234
PFD. The SD card needs to be reinserted. PFD2 CARD 2 ERR – Card 2 is The SD card in the bottom card slot of the specified PFD invalid. contains invalid data. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 235
IAF waypoint for parallel offset has been passed. unavailable: past IAF. REGISTER CONNEXT – Data The GDL 59 is not registered with Garmin Flight Data Services, services are inoperative, register w/ or its current registration data has failed authentication. CONNEXT.
Page 236
PFD or MFD is missing or invalid. unavailable. TIMER EXPIRD – Timer has expired. The system notifies the pilot that the timer has expired. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 237
The Transponder is incapable of processing traffic information. Transponder: ADS-B traffic has failed XPDR1 ADS-B UAT – Datalink: A failure has been detected in the UAT receiver. ADS-B in UAT receiver has failed. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 238
XTALK ERROR – A flight display The MFD and PFD are not communicating with each other. The crosstalk error has occurred. system should be serviced. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Displays the HSI Map. Inset Trfc Replaces the Inset Map with a dedicated traffic display. HSI Trfc Replaces the HSI Map with a dedicated traffic display. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 240
Adds or removes the display of Stormscope information on the PFD Map. The softkey annunciator is green when the function is on. When the function is off, the annunciator is gray. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 241
Displays additional SVT overlay softkeys. Pathways Displays Pathway Boxes on the Synthetic Vision Display. Terrain Enables synthetic terrain depiction. HDG LBL Displays compass heading along the Zero- Pitch line. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 242
Slews heading clockwise (GRS 7800 only). HDG Sync Synchronizes heading to the selected heading (GRS 7800 only). TRK Sync Synchronizes heading to the current track (GRS 7800 only). Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 243
Altitude Reporting Mode (transponder replies to identification and altitude interrogations). Automatically enters the VFR code (1200 in the U.S.A. only). Code Displays transponder code selection softkeys 0-7. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 244
Displays the TCAS control softkeys. Relative Displays intruder altitude as altitude relative to own aircraft altitude. Absolute Displays intruder MSL altitude. ALT RNG Displays the altitude display range softkeys. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 245
Softkey label to change to a flashing ‘Message’ Messages label. Pressing the Message softkey opens the ‘Alerts’ Window, acknowledges the message, and the softkey reverts to the ‘Alerts’ label. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Displays XM NEXRAD weather and coverage on ‘Navigation Map’ Page (optional). XM LTNG Displays XM lightning information on ‘Navigation Map’ Page (optional). METAR Displays METAR information on Inset Map (subscription optional). Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 247
Displays departure procedure chart. STAR Displays standard terminal arrival procedure chart. Displays approach procedure chart. Displays weather. NOTAM Displays NOTAM information for selected airport, when available. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
ENT Key, provided a valid, verified standby database is present. In some cases it may be necessary to obtain an unlock code from Garmin in order to make the database product functional. It may also be necessary to have the system configured by a Garmin authorized service facility in order to use some database features.
Page 249
Database updates can be obtained by following the instructions detailed in the ‘Aviation Databases’ section of the Garmin website (flygarmin.com). Once the updated files have been downloaded from the website, a PC equipped with an appropriate SD card reader is used to unpack and program the new databases onto an existing Supplemental Data Card.
Page 250
Press the Menu Key and select ‘Details’ using the small FMS Knob and press the ENT Key. Press the ENT Key or the FMS Knob to exit. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Page 251
Bluetooth Transceiver must be enabled on the system and inserted in the bottom SD slot of the MFD. A mobile device with Garmin Pilot must be paired with the Bluetooth Trans- ceiver over Bluetooth (Refer to the Additional Features section). When there is at least one paired device available to connect, the Bluetooth Transceiver will automatically connect to the system’...
Page 252
3) Press the ENT Key or the right-most softkey on MFD display to acknowledge the startup screen. 4) On the mobile device, start Garmin Pilot and touch Home > Connext > Database Concierge. 5) Turn the large FMS Knob and select Aux.
Page 253
Press the ENT Key or the right-most softkey on MFD display to acknowledge the startup screen. f) Turn the large FMS Knob and select Aux. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 254
3) Press the ENT Key or the right-most softkey on MFD display to acknowledge the startup screen. 4) On the mobile device, start Garmin Pilot and tap Home > Connext > Database Concierge. 5) Turn the large FMS Knob and select Aux.
Page 255
20) To manually activate any databases that did not transfer to the ‘Active’ column: a) Press the FMS Knob. The first database title on the screen will be selected. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 256
DB) to show database information for each display. Use the small FMS Knob to scroll through the database information. Press the ENT Key or the FMS Knob to exit. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
10) Turn the large FMS Knob and select Aux. 11) Turn the small FMS Knob and select Databases. 12) Confirm that all databases have been deleted from the system. 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
3) With ‘OK’ highlighted, press the ENT Key on the MFD. A progress monitor is displayed. When the upload is complete, the system is ready for use. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
State Highway (Local Highway) Local Road (Local Road) Railroads (RAILROAD) Large City (> 200,000) 1000 Medium City (> 50,000) Small City (> 5,000) State/Province 1000 River/Lake Latitude/Longitude (LAT/LON) 1000 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
1000 Temporary Flight Restriction (TFR) 1000 VNAV Constraints 1000 1000 (VNAV Constraints) Show All (show all constraints within flight plan if VNAV Constraints are ‘On’ above) Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Class B Airspace/TMA (CLASS B/TMA) Class C Airspace/TCA (CLASS C/TCA) Class D Airspace (CLASS D) Alert/Prohibited/Restricted/Warning Areas (RESTRICTED) Military Operations Area [(MOA) (MILITARY)] Other/Air Defense Interdiction Zone (OTHER/ADIZ) 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
‡ A roll steering path in the flight plan that is beyond the next leg appears as a future roll steering path. When a future roll steering path becomes the next leg in the flight plan, it appears as a roll steering path. Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...
Unanchored Flight Path Waypoint Displayed when aircraft GPS location is valid, but heading is invalid. Top of Descent (TOD) Bottom of Descent (BOD) Navigating using Dead Reckoning 190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series...
Page 264
Appendix Blank Page Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B...