Garmin G1000 NXI Cockpit Reference Manual page 59

adding a waypoint to the active flight plan:
1) Press the FPL Key.
2) Press the FMS Knob to activate the cursor (not required on the PFD).
3) Select the point in the flight plan before which to add the new waypoint. The new
waypoint is placed directly in front of the highlighted waypoint.
4) Turn the small FMS Knob to display the 'Waypoint Information' Window. (Turning it
clockwise displays a blank 'Waypoint Information' Window, turning it counter-clockwise
displays the 'Waypoint Information' Window with a waypoint selection submenu allowing
selection of active flight plan, nearest, recent, or user waypoints).
5) Enter the identifier, facility, or city name of the waypoint or select a waypoint from the
submenu of waypoints and press the ENT Key. The active flight plan is modified as each
waypoint is entered.
Creating and adding user waypoints to the active flight plan using the map pointer:
1) Press the FPL Key.
2) Press the FMS Knob on the MFD to activate the cursor.
3) Select the point in the flight plan to add the new waypoint.
4) Push the Joystick on the MFD to activate the panning function on the 'FPL - Active Flight
Plan' Page and pan to the map location of the desired user waypoint.
5) Press the Ld WPT Softkey; or press the MENU Key, select 'Load Waypoint', and press the
ENT Key. The user waypoint is created with a name of USRxxx (using the next available
in sequence) and is added to the active flight plan.
adding a waypoint to an existing stored flight plan:
1) On the 'FPL - Flight Plan Catalog' Page, press the FMS Knob to activate the cursor.
2) Highlight the desired flight plan.
3) Press the Edit Softkey; or press the ENT Key, turn the large FMS Knob clockwise to select
"Edit" and press the ENT Key. The 'FPL - Stored Flight Plan' Page is displayed.
4) Select the point in the flight plan to add the new waypoint. The new waypoint is placed
directly in front of the highlighted waypoint.
5) Turn the small FMS Knob to display the 'Waypoint Information' Window. (Turning it
clockwise displays a blank 'Waypoint Information' Window, turning it counter-clockwise
displays the 'Waypoint Information' Window with a waypoint selection submenu allowing
selection of active flight plan, nearest, recent, user, or airway waypoints).
6) Enter the identifier, facility, or city name of the waypoint or select a waypoint from the
submenu of waypoints and press the ENT Key. The new waypoint now exists in the flight
plan.
190-02622-00 Rev. A Garmin G1000 NXi Cockpit Reference Guide for the da62
Flight Management
35