Displaying Traffic Data - Garmin G1000 NXI Cockpit Reference Manual

dISPLayING TRaFFIC daTa

Enabling/disabling traffic overlays (MFd navigation maps):
1) Select the Map opt Softkey.
2) Select the Traffic Softkey. Traffic is now displayed on the navigation map.
Enabling/disabling traffic information on the PFd Inset Map or HSI Map:
1) On the PFD, press the Map/HSI Softkey.
2) Press the Traffic Softkey to enable/disable the display traffic information on the Inset
Map or HSI Map.
Customizing traffic display on the 'Map - Navigation Map' Page:
1) Select the 'Map - Navigation Map' Page.
2) Press the MENU Key.
3) With 'Map Setup' highlighted, press the ENT Key.
4) Turn the small FMS Knob to select the 'Traffic' Group and press the ENT Key.
5) Turn the large FMS Knob or press the ENT Key to scroll through product selections.
• Traffic – Turns the display of traffic data on or off
• Traffic Mode – Selects the traffic mode for display; select from:
- All Traffic - Displays all traffic.
- TA Only - Displays Traffic Alerts only.
• Traffic Symbols – Selects the maximum range at which traffic symbols are
shown.
• Traffic Labels – Selects the maximum range at which traffic labels are shown
(with the option to turn off).
6) Turn the small FMS Knob to scroll through options for each product (On/Off, range
settings, etc.).
7) Press the ENT Key to select an option.
8) Press the FMS Knob or CLR Key to return to the 'Map - Navigation Map' Page with the
changed settings.
displaying traffic on the 'Map - Traffic Map' Page:
1) Turn the large FMS Knob to select the Map Page Group.
2) Turn the small FMS Knob to select the 'Map - Traffic Map' Page.
3) Confirm TIS is in Operating Mode:
Press the TIS oPER Softkey to begin displaying traffic.
or:
a) Press the MENU Key.
b) Select 'Operate Mode' (shown if TIS is in Standby Mode) and press the ENT Key.
190-02622-00 Rev. A Garmin G1000 NXi Cockpit Reference Guide for the da62
Hazard avoidance
97