Satellite Telephone And Datalink Services (Optional); Registering The System With Garmin Connext; Disable/Enable Iridium Transceiver; Contacts - Garmin G1000 NXI Cockpit Reference Manual

1) From the 'Map - IVR/VFR Charts' Page, press the MENU Key to display the 'Page Menu.'
2) Select 'Display VFR', 'Display IFR Low' or 'Display IFR High' to display the desired chart.
3) Press the ENT Key.
Modifying the IFR Low, IFR High, and VFR Charts settings:
Select
1)
the 'Map - IFR/VFR Charts' Page.
Press
2)
the Map opt Softkey to display the Map Options.
Press
3)
the Traffic Softkey to enable/disable traffic overlaid onto the charts displayed.

SaTELLITE TELEPHoNE aNd daTaLINK SERVICES (oPTIoNaL)

REGISTERING THE SySTEM WITH GaRMIN CoNNEXT

Registering the system for datalink services:
1) Using the FMS Knob, select the 'Aux - System Status' Page.
2) Touch the LRU Softkey, if not already selected.
3) Press the FMS Knob to activate the cursor.
4) Use the large FMS Knob to view 'GSR 1.'
5) Note the GSR 1 Serial Number. This number will be needed when contacting Garmin
Connext to establish the account.
6) Also note the System ID. It is found in the Airframe Box on the 'Aux - System Status
Page'. The System ID will also be needed when contacting Garmin Connext.
7) Contact Garmin Connext to establish an account and receive an access code.

dISaBLE/ENaBLE IRIdIUM TRaNSCEIVER

disabling/enabling telephone and low speed data services:
1) Turn the large FMS Knob on the MFD to select the 'Aux' Page group.
2) Turn the small FMS Knob to select the 'Aux - Satellite Phone' Page.
3) If necessary, press the Phone Softkey to display the 'Aux - Telephone' Page.
4) Press the MENU Key. The 'Page Menu' Window is now displayed.
5) Turn the FMS Knob to select 'Disable Iridium Transmission' in the menu list.
6) Press the ENT Key. The Iridium transceiver is now disabled.
7) To enable the Iridium transceiver, repeat steps 1 through 4, then select 'Enable Iridium
Transceiver.'

CoNTaCTS

Creating a new contact:
1) With the 'Aux - Telephone Phone' Page displayed, press the FMS Knob to display the
cursor.
2) If necessary, turn either FMS Knob to place the cursor on 'New Entry.'
190-02622-00 Rev. A Garmin G1000 NXi Cockpit Reference Guide for the da62
additional Features
117