Activate The Nvidia Gpu On The Server; Installing The Idrac Service Module On An Esxi Server; Install The Ism Using Ssh - Dell EMC ScaleIO Ready Node 14G Manual

Hide thumbs Also See for EMC ScaleIO Ready Node 14G:
Table of Contents

Advertisement

Reference Material

Activate the NVIDIA GPU on the server

Installing the iDRAC Service Module on an ESXi server

Install the iSM using SSH

Hardware Configuration and Operating System Installation Guide - ESXi Servers
66
In deployments where an NVIDIA GRID GPU card is configured on the ScaleIO Ready
Node Rn740xd server, activate the NVIDIA GRID Enterprise software.
Before you begin
Verify that:
ScaleIO Ready Node supports the NVIDIA GPU being used. ScaleIO Ready Node
l
supports these card models:
Tesla M10
n
Tesla M60
n
A valid GRID Enterprise software license exists. GRID Enterprise software is
l
licensed by the number of concurrent users and must have been purchased with
the GPU-enabled ScaleIO Ready Node servers. The following editions are available
for NVIDIA GRID Software license:
Virtual Applications (vAPP)
n
Virtual PC (vPC)
n
Virtual Workstation (vWS)
n
Procedure
1. Locate the email with the PAK and registration link to the NVIDIA licensing
portal.
2. Log in to the licensing portal to access the Product Activation Key and driver
for your NVIDIA card.
3. Follow the instructions for enabling and setting up the GPU card.
The iDRAC Service module (iSM) is a small OS-resident process that expands iDRAC
management into supported host operating systems. Services that the iSM adds
include OS information, automatic system recovery, and remote server power cycle.
It also enables NVMe device removal without shutting down or rebooting the system.
The iSM is available as a Zip file for installing on systems running the VMware ESXi
operating system. You can install the iSM via SSH or using the vSphere CLI.
The Zip file follows the naming convention ISM-Dell-Web-3.0.1-<bldno>.VIB-
<version>i.zip, where
supported ESXi versions are:
ESXi 6.0 - ISM-Dell-Web-3.0.1-<bldno>.VIB-ESX60i.zip
l
ESXi 6.5 - ISM-Dell-Web-3.0.1-<bldno>.VIB-ESX65i.zip
l
Install the iDRAC Service Module (iSM) software on the ESXi host via SSH.
Procedure
1. Download the ISM-Dell-Web-3.0.1-<bldno>.VIB-<version>i.zip file
from
http://www.dell.com/support/home/us/en/19/drivers/driversdetails?
driverId=G0XDV%20.
<version > is the supported ESXi version. Files for the

Advertisement

Table of Contents
loading

Table of Contents