Western Digital Ultrastar Data60 Installation Manual page 49

5. Installation
Installation Guide
5.2 Ultrastar Data60 Installation Procedure
Figure 20: Screw Installation Location
Step 8 : Install the two rack latch brackets at the front of the rack.
a. Orient the brackets so that the screw holes are between the two pins supporting the outer
rails as shown in the following image. There is a left and a right. Use the image below as a
guide for how to orient this bracket and mirror it for the other side. Notice the increased
distance between the top two screw holes and the lower screwholes and the flange being
oriented on the outside.
42