Western Digital Ultrastar Data60 Installation Manual page 39

Installation Guide
Figure 9: Unpack Chassis
Step 7 : Remove the chassis itself from the chassis box. The chassis should be team lifted for safety. Do
not lift the chassis by system handles. The chassis weight without drives is 20 kg / 44 lbs.
Step 8 : Open the HDD boxes and verify their contents. Depending on the version of the Ultrastar Data60
being unpacked, they should contain 20 drives each. Once the contents are verified, leave them
in the boxes. This will protect them from damage until they are installed in the enclosure.
4.2 Ultrastar Data60 Unpacking Procedure
4. Packaging
32