Installation Guide
Figure 21: Rack Latch Bracket Installed
b. Use 6 of the included M5 x 12mm screws and the T15 Torx screwdriver to install each bracket,
3 screws per bracket.
Caution: Always install the top cover onto the enclosure before installing the chassis into a
rack. Not having the top cover installed may damage the alignment brackets.
Step 9 : Extend the mid-rails out of the rack so that they are protruding from the front of the rack and the
safety latches engage.
5.2 Ultrastar Data60 Installation Procedure
5. Installation
43