Maintenance And Cleaning; Cleaning Mineral Deposits - Heinner HEM-1050XMC Instruction Manual

www.heinner.com
4. Dip the steam wand without froth device sleeve into the liquid to be heated or the
intended froth milk.
Turn the operation knob to the "
5. When the required temperature is reached, you can turn the operation knob to the "O"
position.
7. Press the power switch to the "O" position to cut off the power source.
VI. MAINTENANCE AND CLEANING
1 、 Cut off power source and let the coffee maker cool down completely before
cleaning.
2、Clean housing of coffee maker with moisture‐proof sponge often and clean water
tank, drip tray and removable shelf regularly then dry them.
Note: Do not clean with alcohol or solvent cleanser. Never immerse the housing in
water for cleaning.
3 、 Detach the metal funnel by turning it clockwise, get rid of coffee residue inside,
then you can clean it with cleanser, but at last you must rinse with clear water.
4、Clean all the attachments in the water and dry thoroughly.

CLEANING MINERAL DEPOSITS

1. To make sure your coffee maker operating efficiently, internal piping is cleanly and
the peak flavor of coffee, you should clean away the mineral deposits left every 2‐3
months.
2. Fill the tank with water and descaler to the MAX level ( the scale of water and
descaler is 4:1, the detail refers to the instruction of descaler. Please use "household
descaler", you can use the citric acid (obtainable from chemist's or drug stores)
instead of the descaler (the one hundred parts of water and three parts of citric acid).
3. According to the program of pre‐heating, put the metal funnel (no coffee powder in
it) and carafe (jug) in place. Brewing water per " PRE‐HEATING".
4. Press the power switch to the lower position which is the "ON" position. The power
indicator will be illuminated. The appliance will start heating.
5. Press down the Coffee/steam button to the higher position which is the
" "position, waiting for a moment, until the ready indicator lights, it shows the
pre‐heating is finished.
6. Turn the operation knob to the "
2Oz). Then turn it to the "O" position.
1050W, 50Hz, 220‐240V
" position.
"
position and make two cups coffee (about
18