Cleaning And Maintenance; Cleaning Mineral Deposits - Heinner HEM-1100CR Instruction Manual

www.heinner.com
VI. CLEANING AND MAINTENANCE
1. Cut off power source and let the coffee maker cool down completely before
cleaning.
2. Clean housing of coffee maker with moisture-proof sponge often and clean water
tank, drip tray and removable shelf regularly then dry them.
Note: Do not clean with alcohol or solvent cleanser. Never immerse the housing in
water for cleaning.
3. Detach the metal funnel by turning it clockwise, get rid of coffee residue inside,
then you can clean it with cleanser, but at last you must rinse with clear water.
4. Clean all the attachments in the water and dry thoroughly.
Note: Clean the appliance after every use in order to make it work properly.
 CLEANING MINERAL DEPOSITS:
1. To ensure your coffee maker can operate efficiently, internal piping is clean and the
peak flavor of coffee, you should clean away the mineral deposits left every 1-2
months
2. Fill the tank with water and descaler to the MAX level (the proportion of water and
descaler is 4:1, details refers to the instruction of descaler. Please use "household
descaler", you can use the citric acid (obtainable from chemists or drug stores)
instead of the descaler (one hundred parts of water and three parts of citric acid).
3. According to the program of pre-heating, put the metal funnel (no coffee powder
in it) and carafe (jug) in place. Brew water per "PRE-HEATING".
4. Press down the ON/OFF button " " to turn on the unit, the power indicator
(orange) will be illuminated, you should press the pump control button to the
lower position which is the "
on the higher position which is the " " position, when there is water flowing out
and close the pump by pressing the pump control button again to the "
position, and wait for a moment, the coffee maker begins to be heated.
5. When the ready indicator (green) illuminate, it shows the heating is finish. Pressing
down the pump control button to the lower position which is the "
and make make two cups coffee (about 2Oz). Then close the pump and wait for 5s.
" position, make sure the coffee/steam button is
1100W, 50Hz, 220-240V
"
" position
26