Failures/Troubleshooting; Warning; Error - Otto Bock B400 Instructions For Use Manual

Failures/Troubleshooting

8 Failures/Troubleshooting
INFORMATION
Should you encounter problems while troubleshooting or if
you do not manage to completely eliminate a problem by
following the measures described here, please contact
your specialist dealer.
Malfunctions are indicated by the flashing Battery Capacity
LED indicator on the control panel. Table 5 describes the
individual indications with the corresponding sources of the
problem as well as the possible causes and measures to be
taken.
If you do not manage to completely eliminate the problems
with the described measures, your specialist dealer may be
able to read the exact error code with the hand program-
ming device and undertake a more systematic analysis of
the system.
All problems that have ever occurred are saved in a list and
can be retrieved, for example, in case of a general overhaul
of the power wheelchair. The saved data can be used to
determine future service and maintenance intervals, for ex-
ample.
44 | Ottobock
8.1

Warning

A warning indicates a status or malfunction of one or several
components of the power wheelchair. The function of com-
ponents that have no errors is not restricted.
8.2

Error

CAUTION
Risk of injury if the power wheelchair stops abruptly. In
the event of communication problems in the bus system of
the controls, the system triggers an emergency stop to
prevent any uncontrolled functions. Depending on the
source of the malfunction, it is possible to drive the wheel-
chair out of a danger zone such as road traffic after
switching the controls on again.If the driving function is
still not available after switching on the controls again, the
brakes must be released (see section 6.4) to switch over
to the pushing mode. After the power wheelchair has trig-
gered an emergency stop, contact a specialist dealer as
soon as possible!
B400