Control Valve Delay; Zero Speed Shut-Off; Data Menu - Raven Spra-Coupe SCS 460 Operator's Manual

8.

CONTROL VALVE DELAY

Depress
( X 0 0 0 ), is the Control Valve delay digit.
set a delay between the time the booms are turned ON and when the Console begins
to control the flow rate. A value of 1-9 means a delay of 1-9 seconds respectively.
A value of 0 means no delay.
OFF and turning ON the booms is less than 30 seconds.
9.

ZERO SPEED SHUT-OFF

This function will be active when C-FC (Fast Close Valve) or C-PC (PWM Close Valve)
is selected.
selected, the valve will receive a decrease signal and run closed when the speed
drops to .7 MPH or less.
is in the manual mode.
When a zero speed shut-off has occured, the MASTER switch must be turned OFF and
then ON to restart the system.
attained within 10 seconds, the zero speed shut-off will be enacted again.

10. DATA MENU

The following are brief descriptions of features available under the DATA MENU
key.
DISPLAY
PRINT FIELD BEGIN
ALARM ON
DISPLAY SMOOTHING ON
RATE CHANGE ALARM ON
GPS FILE REF 1
GPS INACTIVE
until display shows
This delay is active if the time between turning
This function can not be disabled.
The only way the console can operate at .7 MPH or less
If a constant speed greater than .7 MPH is not
DESCRIPTION
Sends data through serial port to attached optional
printer to print field begin and field end pages.
Turns audible alarms ON or OFF for the following:
1)
2)
3)
Turns display smoothing ON or OFF.
display smoothing ON means the window displays
target rate when actual rate is within 10% of target
rate.
Turns rate change alarm ON or OFF. When rate change
alarm is selected ON; alarm sounds 4 long beeps
when the Rate 1 calibration number is changed via
the serial port using a valid change request data
string.
Used only the Raven Grid Application System.
Grid Application System manual for more details.
Used only with Raven Grid Application System. See
Grid Application System manual for more details.
CONTROL VALVE DELAY
This feature allows the user to
When C-FC or C-PC has been
Volume/Area Rate Alarm
Volume/Minute Rate Fault
Low Tank Fault
20
. The first digit,
Selecting
See