Table of Contents
Advertisement
Chapter 3
Install Fittings in the SmarTrax Valve
Before mounting the SmarTrax valve (P/N 334-0003-088) on the machine, install the proper fittings in the
valve. This prepares the valve for installation and simplifies the hose connection process later in the procedure.
Fittings Installed in the SmarTrax Valve
FIGURE 1.
Install -10 JIC M/F 90° Swivel
Elbow (P/N 333-0012-108) on
Fittings Installed in Ports P
and T
Fitting - -6 JIC (M) to -10 SAE O-Ring (M) Straight Adapter
Fitting - -6 JIC M/F 90° Swivel Elbow
Fitting - -4 JIC (M) to -6 SAE O-Ring (M) Straight Adapter
Fitting - -4 JIC M/F 90° Swivel Elbow
Fitting - -10 JIC (M) to -8 SAE O-Ring (M) Straight Adapter
Fitting - -10 JIC M/F 90° Swivel Elbow
Transducer - 0-3000 PSI Pressure
10
RBR Enterprise Vector 300 LS/Venturi LS SmarTrax™ Installation Manual
The appearance of the SmarTrax hydraulic
valve may vary slightly from the images
contained in this manual. However, the fittings,
hose connections, and cable connections
remain the same.
Fitting
NOTICE
Install -6 JIC M/F 90° Swivel
Elbow (P/N 333-0012-042) on
Fittings Installed in Ports A
and B
Install -4 JIC M/F 90° Swivel
Elbow (P/N 333-0012-154) on
Fitting Installed in Port LSPV
Part Number
333-0012-106
333-0012-042
333-0012-044
333-0012-154
333-0012-110
333-0012-108
422-0000-086
Port
A, B
A, B
LSPV,
LS STEER
LSPV
P, T
P, T
PS
Advertisement
Table of Contents
