Trigger[N]:Input; Trigger[N]:Output - Keysight N777 C Series Programming Manual

Command:

:TRIGger[n]:INPut?

Syntax: :TRIGger[n]:INPut?
Description: Returns the incoming trigger response.
Parameters: None
Response: IGNore:
NEXTstep:
SWStart:
Example: :trig0:inp?
Affects: All tunable laser modules
Command:

:TRIGger[n]:OUTPut

Syntax: :TRIGger[n]:OUTPut
Description: Specifies when an output trigger is generated and arms the module.
Parameters: DISabled:
STFinished:
SWFinished:
SWSTarted:
Response: None
Example: :trig0:outp dis
Affects: All tunable laser modules
Command: :TRIGger[n]:OUTPut?
Syntax: :TRIGger[n]:OUTPut?
Description: Returns the condition that causes an output trigger.
Parameters: none
Keysight N777xC Series Tunable Laser Family Programming Guide
Ignore incoming trigger.
Perform next step of a stepped sweep.
Start a sweep cycle.
->
ign
Never.
When a sweep step finishes.
When sweep cycle finishes.
When a sweep cycle starts.
Measurement Operations & Settings 4
87