Keysight N777 C Series Programming Manual page 78

4 Measurement Operations & Settings
Response: none
Example: :sour0:wav:swe STOP
Affects: All N777xC tunable laser sources
Command: :SOURce0:WAVelength:SWEep:[STATe]?
Syntax: :SOURce0:WAVelength:SWEep:[STATe]?
Description: Returns the state of a sweep.
Parameters: None
Response: +0:
+1:
+2:
Example: :sour0:wav:swe?
Affects: All N777xC tunable laser sources
Command: :SOURce0:WAVelength:SWEep:STEP:NEXT
Syntax: :SOURce0:WAVelength:SWEep:STEP:NEXT
Description: Performs the next sweep step in stepped sweep if it is paused or in manual sweep.
Parameters: None
Response: None
Example: :sour0:wav:swe:step:next
Affects: All N777xC tunable laser sources
Command: :SOURce0:WAVelength:SWEep:STEP:PREVious
Syntax: :SOURce0:WAVelength:SWEep:STEP:PREVious
Description: Performs one sweep step backwards in stepped sweep if it is paused or in manual sweep
Parameters: None
78
Sweep is not running
Sweep is running
Sweep paused
->
+0
Keysight N777xC Series Tunable Laser Family Programming Guide
.