Keysight N777 C Series Programming Manual page 37

Command: :STATus0:OPERation:ENABle
Syntax: :STATus0:OPERation:ENABle<wsp><value>
Description: Sets the bits in the Operation Slot Status Enable Mask (OSSEM) for the laser module that enable the contents of the
Operation Slot Status Event Register (OSSER) to affect the OSESR.
Setting a bit in this register to 1 enables the corresponding bit in the OSSER and OSESR.
Parameters: The bit value for the OSSEM as a 16-bit unsigned integer value (0 .. +65535)
Response: none
Example: :stat0:oper:enab 128
Command: :STATus0:OPERation:ENABle?
Syntax: :STATus0:OPERation:ENABle?
Description: Returns the OSSEM of the laser module
Parameters: none
Response: The bit value for the OSSEM as a 16-bit unsigned integer value (0 .. +65535)
Example: :stat0:oper:enab? -> +128
Command: :STATus:PRESet
Syntax: :STATus:PRESet
Description: Presets all bits in all OPERation and QUEStionable status systems to 0.
Parameters: none
Response: none
Example: :stat:pres
Keysight N777xC Series Tunable Laser Family Programming Guide
Instrument Setup and Status 3
37