Keysight N777 C Series Programming Manual page 33

Command: *WAI
Syntax: *WAI
Description: The WAIt command prevents the instrument from executing any further commands until the current command has finished
executing. Some module firmware includes commands that set a "StatNOPC" flag during execution to indicate that the
module is busy. *WAI blocks all commands until every module hosted by the instrument is no longer busy. All pending
operations, are completed during the wait period.
Parameters: none
Response: none
Example: *WAI
Keysight N777xC Series Tunable Laser Family Programming Guide
Instrument Setup and Status 3
33