Response:
none
Example:
:sour0:wav:swe:mode STEP
Affects:
All N777xC tunable laser sources
Command:
:SOURce0:WAVelength:SWEep:MODE?
Syntax:
:SOURce0:WAVelength:SWEep:MODE?
Description:
Returns the sweep mode.
Parameters:
None
Response:
STEP:
MAN:
CONT:
Example:
:sour0:wav:swe:mode?
Affects:
All N777xC tunable laser sources
Command:
:SOURce0:WAVelength:SWEep:PMAX?
Syntax:
:SOURce0:WAVelength:SWEep:PMAX?<wsp><start wavelength>,<stop wavelength>
Description:
Returns the power to the highest permissible power for the selected wavelength sweep.
Parameters:
start wavelength:
stop wavelength:
Response:
The highest permissible power for the selected wavelength sweep as a float value.
Example:
:sour0:wav:swe:pmax? 1540nm,1550nm -> +3.5500000E-004
Affects:
All N777xC tunable laser sources
Command:
:SOURce0:WAVelength:SWEep:REPeat
Syntax:
:SOURce0:WAVelength:SWEep:REPeat<wsp><mode>
Description:
Sets the repeat mode. Applies in stepped-sweep and manual sweep modes. The N7776C, N7777C and N7778C also support
TWOWay mode in continuous sweep mode.
Keysight N777xC Series Tunable Laser Family Programming Guide
Stepped sweep mode
Manual sweep mode
Continuous sweep mode
->
STEP
The wavelength at which the sweep starts as a float value.
The wavelength at which the sweep starts as a float value.
Measurement Operations & Settings
4
73