FPA-5000 | FPA-1200 | AVENAR panel 8000 |
AVENAR panel 2000 | AVENAR keypad 8000
If you select a function for which a particular access authorization is required and no user with
the appropriate authorization is logged on, you will be asked to enter your user ID and
password.
Access authorizations are assigned for access levels two to four. Only a few functions can be
used on access level one, while all functions can be used on access level four.
To check the access authorization of the person who is logged in, press
logging in:
The relevant access authorization is displayed.
5.5
Calling up the start menu
Press the "home" key to return to the start menu from any submenu.
Notice!
The display changes from each menu element to the standby display if no entries are made
after 5 minutes, in case of an alarm or a fault message after 60 minutes, see also Standby
screen, page 18 .
If the screen is black, touch it gently to display the standby screen.
5.6
Personalized menu
Via the FSP-5000-RPS programming software you can configure your personalized start menu
which displays up to eight functions you need most often directly when you log in to the
panel.
To retrieve the personalized menu log on to the panel: Press the login key and enter your user
lD and password.
To change back from the personalized menu to the common main menu press the "home" key.
To change back to the personalized menu from any other screen, press the login key.
5.7
Selecting the menu
In order to select a menu in the main menu, touch the field you require with your finger:
The submenus are displayed.
To select a submenu, gently touch the required field.
5.8
Returning to the previous selection
To return to the previous selection, press the "Back" key:
Bosch Sicherheitssysteme GmbH
User Guide
Operating principle | en
23
after
2020-07 | 3.0 | F.01U.378.877