Activate Transmission Device; Bypassing/Un-Bypassing Buzzer - Bosch FPA‑5000 User Manual

64 en | Maintenance
Notice!
In the HVAC element category, the Auto function field is also offered. Select this function
field to assign automatic mode to a fan, for instance.
14.4

Activate Transmission Device

To activate a transmission device:
1.
2.
3.
4.
To end activation of the selected elements:
1.
2.
3.
4.
14.5

Bypassing/Un-bypassing buzzer

In order to prevent an acoustic warning tone being sent to the panel during maintenance
work, for example, the panel's internal buzzer can be permanently bypassed.
To bypass the internal buzzer, select the following from the start menu:
1.
2.
To remove the bypass from the buzzer, select Unbypass buzzer in step 2.
Notice!
If you switch the internal buzzer off permanently, no acoustic signal will sound on the panel in
the event of an alarm or fault!
2020-07 | 3.0 | F.01U.378.877
In the start menu, select Maintenance
Activate transmission device
A list of the elements is displayed. Refer to Working with lists, page 24 for information on
how to navigate through a list.
Select the required list fields.
The list fields are marked.
Select On.
The selected transmission devices are activated.
In the start menu, select Maintenance
Activate transmission device
Select the list fields of the activated transmission devices.
Select Off.
The transmission devices are no longer activated.
Maintenance
Bypass buzzer
The buzzer is bypassed and the text on the user interface changes to Unbypass buzzer.
User Guide
FPA-5000 | FPA-1200 | AVENAR panel 8000 |
AVENAR panel 2000 | AVENAR keypad 8000
Bosch Sicherheitssysteme GmbH