Can-Bus; Panel Passport; Led Test On Modules; Network Services - Bosch FPA‑5000 User Manual

58 en | Diagnostics
3.
13.4.2

CAN-Bus

Select CAN bus to display the status of the CAN interfaces.
13.5

Panel Passport

Select Panel passport to display the following diagnostic information:
–
–
–
–
–
–
–
–
–
–
–
13.6

LED Test on modules

To test the LED display of selected modules:
1.
2.
A list of various selection criteria is offered:
–
–
Example
To test the LED displays of an LSN 300 module:
1.
2.
3.
4.
Notice!
The numbers before the module names indicate the slot of the module on the panel.
13.7

Network services

13.7.1

Routing table

To display routing information:
1.
2.
2020-07 | 3.0 | F.01U.378.877
Select Display test.
First the buzzer is switched on for a short time. Then the display is filled with the colors
black, white, red, green and blue. After this, line by line, the display turns to these colors
from the top to the bottom and then changes again to the Hardware menu.
License model of the panel controller (premium or standard)
CAN ID
Production date
BOM revision
PCBA material number
Material number
Software version
Build type
Build number
Serial number
MAC Address
In the start menu, select Diagnostics
LED test on modules
Select LED test all modules to test the LED display of all modules.
Select By number or By type to test the LED display of individual selected modules.
Select By type.
A list of all module types is displayed.
Select the LSN 300 module.
A list of all LSN 300 modules is displayed.
Select the list field(s) you require. The list fields are marked.
Select Activate LEDs.
The LEDs are activated for the duration of approx. five seconds.
In the start menu, select Diagnostics
Network services
User Guide
FPA-5000 | FPA-1200 | AVENAR panel 8000 |
AVENAR panel 2000 | AVENAR keypad 8000
Bosch Sicherheitssysteme GmbH