FPA-5000 | FPA-1200 | AVENAR panel 8000 |
AVENAR panel 2000 | AVENAR keypad 8000
20
Reset
This chapter contains information on how to reset elements.
During resetting, the selected elements are reset to the initial state.
–
–
–
–
–
Notice!
If the Scope refers to one panel, the list fields This panel and Scope have the same function.
20.1
Menu overview
Reset
20.2
Resetting elements
To reset a detector or logical zone, for example:
1.
2.
3.
4.
5.
Notice!
As long as the elements are still in the process of resetting, no other entries can be made.
If a list field is marked with an R, the process of resetting is not yet complete for this element:
TEXT
If an element cannot be reset, it will continue to be displayed in the list.
After the elements have been reset, the standby display is displayed.
To reset a manual call point, use the reset key or replace the glass window.
To reset an automatic detector: If there is still smoke in the detection chamber please
ventilate.
Bosch Sicherheitssysteme GmbH
Event type: Display a list of all message types. The message types can be reset for the
entire Scope.
Scope: Depending on the Scope set in FSP-5000-RPS, the current panel, all panels in a
group or all the panels in the entire network are reset.
Logical zone
Detector
This panel: All elements of the panel that are not in standby mode are reset
-> Event type
Logical zone
In the start menu, select Reset
Select the element you require.
Select the detector or zone.
Select the required list fields.
The list fields are marked.
A list of the detectors or zones is displayed.
Select Reset.
The selected elements are reset.
R
Scope
Detector
This panel
User Guide
Reset | en
85
2020-07 | 3.0 | F.01U.378.877