Connection Of A Braking Resistor With Temperature Monitoring - KEB COMBIVERT F5 Installation Manualline

Installation and Connection
3.3.6

Connection of a braking resistor with temperature monitoring

• ++, PB Connection for braking resistor
• Technical data (see chapter 2.3)
• During clearing of the temperature monitoring the input voltage is switched off
• for additional protection in regenerative operation connect the auxiliary contacts 11 and 12 of
the line contactor K1 (see 3.3.5)
��
��
230 V or 24 V AC/DC
Braking resistors can develop very high surface temperatures, therefor install as safe-to-
touch as possible.
��
�
at 24 V AC/DC
drive check tripping
��
��
���
���
���
��
����
��
��
��
��
�
�
�
��
� �
15