Binning : Setting Of Vertical Pixel Mix; Partial : Setting For Partial Scan; Test Pattern : Setting Of Video Test Pattern; Memory : Save Or Load The Camera Setting - Hitachi HV-F130SCL Operation Manual

9.18 BINNING : Setting of Vertical Pixel Mix

OFF (Factory setting) : Not perform vertical pixel mix.
ON

9.19 PARTIAL : Setting for Partial Scan

-MODE - : Selection of mode
OFF
ON (Power On status) : Perform partial scan.
-START- : Starting line of partial scan
0 to 860
-WIDTH- : Vertical line width of partial scan
100 to 960
=== Notes ===
The total value of the START and WIDTH of partial scan is within 960.
The other is automatically adjusted so as not to exceed the 960 in the setting.

9.20 TEST PATTERN : Setting of Video test pattern

OFF (Factory setting) : Test pattern OFF.
H-RAMP
COLOR BAR

9.21 MEMORY : Save or load the camera setting

-LOAD- : Load memory
DEFAULT (Factory setting): Return to the factory setting..
FILE 1 to FILE 4 : Load the file number 1 to 4
-SAVE- : Save memory
FILE 1 to FILE 4 : Save current settings to the file number 1 to 4
=== Notes ===
Last loading file number will become using for next setting to power supply startup.

9.22 FACTORY SETTING : File data initialize will become returned to the factory setting

File data initialize will become returned to the factory setting.
All files (FILE 1 to FILE 4) will be initialized as same as DEFAULT.
: Vertical pixel mix doing that make approximately double frame rate.
: Not perform partial scan.
: Setting value is a starting line of partial scan on the standard picture.
: Setting value is a vertical line number of partial scan.
: Horizontal RAMP signal.
: Color bar signal.
13