Setting Menu Description; Menu Operation; Main Menu - Hitachi KP-FD30 Operation Manual

Setting menu description

The camera setting and adjustments can be changed to conform to conditions of use. Use the setting menu indicated on the
monitor screen to check and change the settings and adjustments. The setting menu is comprised as follows.
Main setting menu

[ MAIN MENU ]

Menu Operation

Three rear panel setup buttons are used to shift the cursor and
select items from the menus.
①Up button[UP]
Shift the cursor in the upward direction
or increase an adjustment value.
②Down button[DOWN]
Shift the cursor in the downward direction or decrease
an adjustment value.
③Set button[SET]
Press to display the main menu or to change
a setting.
Note:
lf no button is pressed, the menu display extinguishes
automatically after about 5 minutes.
When an item indicated by a
pressing the SET button shifts to the next menu.
Camera title setting menu
[ CAMERA TITLE MENU ]
Auto level control menu
[ ALC MENU ]
AGC setting menu
[ AGC MENU ]
Shutter speed setting menu
[ SHUTTER MENU ]
White balance setting menu
[ WHITEBALANCE MENU ]
Sub menu
[ SUB MENU ]
1）Main menu［MAIN MENU］
Press the SET button for at least 2 seconds to display the
main menu on the monitor screen. Check the present settings
①
at the main menu.
②
③
2）Camera title menu［CAMERA TITLE MENU］
One line of up to 24 alphanumeric characters can be
displayed on the screen.
Camera title and a display position are set up.
mark is selected,
Display on/off positioning setting
[ POSITION ]
ALC area setting
[ AREA(ALC) ]
WB area setting
[ AREA(WB) ]
Main menu
●●● ＭＡＩＮ ＭＥＮＵ ●●●
ＣＡＭＥＲＡ ＴＩＴＬＥ ：ＯＦＦ
ＡＬＣ ：ＡＶＥ
ＡＧＣ ：ＯＦＦ
ＳＨＵＴＴＥＲ ：ＯＦＦ
ＷＨＩＴＥ ＢＡＬＡＮＣＥ：ＭＡＮＵＡＬ
ＳＵＢ ＭＥＮＵ
ＥＮＤ
Main menu
Camera title setting menu
Auto Level control menu
AGC setting menu
Shutter speed setting menu
White balance menu
Sub menu
End
(Return to the normal screen)