Overview; Standard Composition; Features; System Example - Hitachi HV-F130SCL Operation Manual

1.

Overview

HV-F130SCL is high precision 3CCD progressive scan color camera, which has single chip digital processing LSI, a C
mount prism, 1/3 inch 1.3M pixels square CCD and CameraLink interface.
2.

Standard composition

Check when unpacking
Camera ········································································································ 1
Installation guide ····················································································· 1
Plug for DC IN/SYNC connector (HR10A-10P-12S) ·············· 1
Optional accessories
(1) 12 pin plug HR10A-10P-12S(01)
(2) Junction box JU-F30
(3) Mini-CameraLink cable. Refer to page 6.
(CameraLink standard conformity)
3.

Features

・High resolution and color fidelity
The 1/3-inch 1.3 million pixels square lattices progressive scan CCD and dichroic prism for RGB color achieves a high
resolution picture and good color reproduction.
・Small and lightweight
The small SDR connector for digital output allows the camera size and mass to be drastically reduced to 55(W) x 55(H) x
89(D) mm / approx. 310g.
・Various picture quality enhancement
Independent size color masking is the Hitachi innovation for optimizing color balance. Saturation and hue of 6 colors (Red,
Green, Blue, Cyan, Magenta and Yellow) can be adjusted independently to deliver the best color in image capture,
microscope and other applications.
In-out gradation control can be arbitrarily adjusted by using LUT.
・Auto shading correction
Color shading due to aberration of the lens is automatically compensated or reduced.
・Versatile CCD drive functions
Video frame capture on demand using external trigger signal
Long integration mode (max. 10 seconds)
Variable shutter mode (min. 1/100,000 second)
Auto electronic shutter mode
4.

System example

HV-F130SCL connects to frame grabber board using Mini-CameraLink cable.
HITACH
3CCD
HV-F130SCL
In the CE Marking region, use following specified cables
(4) Cameracable
Molded type
2m C-201KSM
5m C-501KSM
10m C-102KSM
In the CE Marking region, use the shield type.
Note : When not using the specified junction box, Mini-CameraLink cable and
camera cable, malfunctions may be caused.
Camera cable
Mini-CameraLink cable
(x 2 when Medium configuration)
Shield type
C-201KSS
C-501KSS
C-102KSS
AC adaptor
CameraLink
frame grabber board
3