10.
Remote control
1. Comms* specifications
・Control system
・Transmission rate
・Data length
・Star bit
・Stop bit
・Parity
・Bit transfer
2. Comms control
The remote control software controls all communications. Data send/receive (BSC handshake) is by transferring TEXT data
to the camera controller chip.
3. Comms procedure
The following pages indicate the camera controller chip and remote control software data protocol. In the description, the
camera is designated as slave and the software as master.
・Receive protect timer (time out error)
The receive protect timer for master and slave processes is 1 second. For example, if 1 block of TEXT data is being
received, if the data interval exceeds 1 second, error is produced and the data are lost. An acknowledgment of data receipt
is not produced.
: Start-stop synchronization system
: 115200 bps
: 8 bit
: 1 bit
: 1 bit
: None
: LSB first
*Comms: Communications
14
Need help?
Do you have a question about the HV-F130SCL and is the answer not in the manual?
Questions and answers