Inserting/Removing the Battery and Card
Insert a fully charged Battery Pack LP-E17 into the camera. The camera
can use SD, SDHC, or SDXC memory cards (sold separately). UHS-II/
UHS-I SDHC and SDXC cards are also supported. The captured images
are recorded onto the card.
Make sure the card's write-protect switch (1) is set upward to enable
o
writing and erasing.
Insertion
42
1
Slide the card slot/battery
compartment cover lock and open
the cover.
2
Insert the battery.
Insert the end with the electrical
z
contacts.
Insert the battery until it locks in place.
z
3
Insert the card.
Insert the card with the label facing the
z
back of the camera as shown until it
(1)
clicks in place.
4
Close the cover.
Press the cover until it snaps shut.
z