Canon EOS RP Instruction Manual page 716

Responding to Error Messages
68: Cannot connect to wireless LAN terminal. Retry from the
beginning.
Did you hold down the access point's WPS (Wi-Fi Protected Setup)
z
button for the specified period of time?
Hold down the WPS button for the period of time specified in the
g
access point's instruction manual.
Are you trying to establish a connection near the access point?
z
Try establishing the connection when both devices are within reach
g
of each other.
69: Multiple wireless LAN terminals have been found. Cannot
connect. Retry from the beginning.
Connection is in progress by other access points in Pushbutton
z
Connection mode (PBC mode) of WPS (Wi-Fi Protected Setup).
Wait a while before trying to establish the connection.
g
91: Other error
A problem other than error code number 11 to 69 occurred.
z
Turn the camera's power switch off and on.
g
121: Not enough free space on server
The target Web server does not have enough free space.
z
Delete unnecessary images on the Web server, check the free space
g
on the Web server, then try sending the data again.
508