Canon EOS RP Instruction Manual page 313

Combinations of Functions in < t > Mode
Shutter
Aperture
Speed
[AUTO] [AUTO]
Manual
[AUTO]
selection
[AUTO]
selection
Manual
selection selection
Blinking values indicate that the values set will cause underexposure or
o
overexposure. Adjust the exposure until the value stops blinking.
Slow-sync shooting is not used under low light when you have set up < t >
o
mode to resemble < f > or < d > mode, even when [Slow synchro] in [ z :
External Speedlite control] is set to [1/180-30sec. auto].
Values for shutter speed, aperture, and ISO speed that are set to [AUTO] are
o
underlined.
You can set shutter speed, aperture, and ISO speed to [AUTO] and exposure
o
compensation to [±0] in steps 2 or 3 by pressing the < X > or < Y > key.
ISO Speed
[AUTO]
Manual
selection
[AUTO]
Manual
selection
[AUTO]
Manual
Manual
selection
[AUTO]
Manual
Manual
selection
Exposure
Compensation
Available
Available
Available
Available
–
Flexible-Priority AE
Shooting Mode
Similar to < d >
Similar to < s >
Similar to < f >
Similar to < a >
105